snapshot of my first "working" version from turn-on of Altus Metrum v0.1

[fw/openalt] / openocd-debug.cfg

diff --git a/openocd-debug.cfg b/openocd-debug.cfg
new file mode 100644 (file)
index 0000000..1fafcc9
--- /dev/null
+++ b/openocd-debug.cfg
@@ -0,0 +1,29 @@
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+#interface
+interface ft2232
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout "olimex-jtag"
+ft2232_vid_pid 0x15BA 0x0003
+jtag_speed 3
+#use combined on interfaces or targets that can't set TRST/SRST separately
+#reset_config trst_and_srst separate
+reset_config trst_and_srst srst_pulls_trst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_init 0 arm7tdmi-s_r4
+run_and_halt_time 0 30
+#target_script 0 reset oocd_flash_lpc2148.script
+working_area 0 0x40000000 0x40000 nobackup
+#flash configuration
+#flash bank lpc2000 0x0 0x7D000 0 0 lpc2000_v2 0 14765 calc_checksum
+flash bank lpc2000 0x0 0x7D000 0 0 0 lpc2000_v2 12000 calc_checksum
+arm7_9 swbkpts enable
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger