fw/altos
3 years agoaltosui,telegps: Do not allow radio calibration to be edited
Keith Packard [Tue, 22 Mar 2016 04:28:39 +0000 (22:28 -0600)]
altosui,telegps: Do not allow radio calibration to be edited

This leads to sorrow for almost everyone. If you want to edit this,
use a terminal program.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltosuilib: Control map debugging output with Serial.debug
Keith Packard [Sat, 26 Mar 2016 22:57:59 +0000 (15:57 -0700)]
altosuilib: Control map debugging output with Serial.debug

This uses the same debug control as the serial output to monitor map downloading

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltoslib: use env var LAUNCH_SITES to override default URL
Keith Packard [Sat, 26 Mar 2016 22:57:21 +0000 (15:57 -0700)]
altoslib: use env var LAUNCH_SITES to override default URL

This makes it easier to debug new launch site data before uploading.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agolibaltos: Fix warning in linux libaltos code
Keith Packard [Mon, 21 Mar 2016 06:11:49 +0000 (23:11 -0700)]
libaltos: Fix warning in linux libaltos code

Just returned the wrong name of the value

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltosuilib: Note that Windows now supports Bluetooth
Keith Packard [Mon, 21 Mar 2016 05:01:07 +0000 (22:01 -0700)]
altosuilib: Note that Windows now supports Bluetooth

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltosui: Delay between polling for igniter status in Fire Igniters
Keith Packard [Mon, 21 Mar 2016 04:54:08 +0000 (21:54 -0700)]
altosui: Delay between polling for igniter status in Fire Igniters

This gives a remote like time to report the full status instead of
sending another request before the reply has been processed.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agolibaltos: Add Windows BT support. Split into separate source files.
Keith Packard [Mon, 21 Mar 2016 04:52:53 +0000 (21:52 -0700)]
libaltos: Add Windows BT support. Split into separate source files.

Add Bluetooth support to Windows. Split libaltos into separate files.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoao-bringup: Use dfu-util to install flash loader on chaoskey
Keith Packard [Fri, 18 Mar 2016 18:17:46 +0000 (11:17 -0700)]
ao-bringup: Use dfu-util to install flash loader on chaoskey

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltos/stmf0: Construct .bin files for flash loaders
Keith Packard [Fri, 18 Mar 2016 18:16:59 +0000 (11:16 -0700)]
altos/stmf0: Construct .bin files for flash loaders

This builds a .bin file which can be used with dfu-util instead of
using openocd to load the initial flash loader.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoao-tools: Add ao-makebin
Keith Packard [Fri, 18 Mar 2016 18:15:57 +0000 (11:15 -0700)]
ao-tools: Add ao-makebin

This constructs a raw binary or DFU format file for use with dfu-util,
which can be used with a bare STM processor to load code before the
boot loader is available.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoao-tools/lib: Add ao_hex_image_cat function
Keith Packard [Fri, 18 Mar 2016 17:52:03 +0000 (10:52 -0700)]
ao-tools/lib: Add ao_hex_image_cat function

This takes two images and constructs a third containing the union of
the contents along with 0xff bytes for any area between them.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoao-tools/lib: Remove trailing whitespace from ao-elf.c
Keith Packard [Fri, 18 Mar 2016 17:51:20 +0000 (10:51 -0700)]
ao-tools/lib: Remove trailing whitespace from ao-elf.c

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoao-tools/ao-dump-up: Remove spurious flight state strings
Keith Packard [Fri, 18 Mar 2016 17:50:32 +0000 (10:50 -0700)]
ao-tools/ao-dump-up: Remove spurious flight state strings

MicroPeak doesn't have flight states like this...

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoChange how we detect and install java
Keith Packard [Fri, 18 Mar 2016 17:48:49 +0000 (10:48 -0700)]
Change how we detect and install java

Detect by finding 'javaw.exe' in the current path and extracting the
version from the program itself.

Install by simply opening the web browser to java.com and letting the
user install it themselves.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltos: Expose fast timer API from kernel/
Keith Packard [Fri, 18 Mar 2016 17:17:24 +0000 (10:17 -0700)]
altos: Expose fast timer API from kernel/

This allows multiple SoCs to provide the same driver interface

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltos: Fixed timing of panic display LED to be readable
Bart Massey [Sun, 6 Mar 2016 01:38:19 +0000 (17:38 -0800)]
altos: Fixed timing of panic display LED to be readable

When we don't have a beeper, there's no way to signal a 'warble' for
panic. So, elide that bit.

Second, panic can't use the scheduler and timer because those may not
be running (or may have failed), and so it uses a delay loop. Add a
configurable scale value to the panic loop so that the LED blinks can
be read. For stm32f0 devices, scale that by the sysclk value to
automatically make them of reasonable length.

3 years agolibaltos: Add unistd.h to get defines for various syscalls
Keith Packard [Sun, 6 Mar 2016 23:05:51 +0000 (15:05 -0800)]
libaltos: Add unistd.h to get defines for various syscalls

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agolibaltos: jni_md.h moved to linux subdir in Java install
Keith Packard [Sun, 6 Mar 2016 23:04:23 +0000 (15:04 -0800)]
libaltos: jni_md.h moved to linux subdir in Java install

Add the linux subdir to CFLAGS to find it.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltos/stmf0: Fix build without second USB IN endpoint
Keith Packard [Sat, 5 Mar 2016 22:37:40 +0000 (14:37 -0800)]
altos/stmf0: Fix build without second USB IN endpoint

The code for the second IN endpoint was using the wrong ifdef.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoao-tools: Add ao-chaosread
Keith Packard [Wed, 2 Mar 2016 22:36:31 +0000 (14:36 -0800)]
ao-tools: Add ao-chaosread

This reads from the raw descriptor to help validate the hardware.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoao-bringup: Switch to v1.0 for chaoskey
Keith Packard [Wed, 2 Mar 2016 22:01:00 +0000 (14:01 -0800)]
ao-bringup: Switch to v1.0 for chaoskey

Not going to build any more v0.1 boards. Also, chaoskey now uses the
unique ID for a serial, so we don't need to provide a serial number.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltos: Add ChaosKey v1.0 product
Keith Packard [Wed, 2 Mar 2016 22:00:06 +0000 (14:00 -0800)]
altos: Add ChaosKey v1.0 product

Much like ChaosKey v0.1, just different SoC package and a few wiring changes.

Signed-off-by: Keith Packard <keithp@keithp.com>
3 years agoaltos/chaoskey: Add another USB endpoint to read raw data
Keith Packard [Wed, 2 Mar 2016 21:54:58 +0000 (13:54 -0800)]
altos/chaoskey: Add another USB endpoint to read raw data

This replaces having the single output switch based on a pin value and
allows us to box the device and still fetch raw data.

For now, this will use a special libusb2 program, ao-chaosread, to
pull bits as I haven't figure out how to make linux provide two
/dev entries for one USB device.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/chaoskey: Use SoC device ID as serial number
Keith Packard [Mon, 15 Feb 2016 23:26:00 +0000 (15:26 -0800)]
altos/chaoskey: Use SoC device ID as serial number

To make manufacturing these devices tractable, we don't want to
require a custom firmware load for each device, but we still want a
unique serial number. Fortunately, the SoC provides a 96-bit ID which
we can use.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/stmf0: Use device ID as usb serial number if requested
Keith Packard [Mon, 15 Feb 2016 23:24:35 +0000 (15:24 -0800)]
altos/stmf0: Use device ID as usb serial number if requested

This exposes the hardware device ID (which is unique per-chip) as the
USB serial number, avoiding the need to create a custom ROM image for
each device.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/chaoskey: Encode both hardware and software versions in product ID
Keith Packard [Mon, 15 Feb 2016 23:23:15 +0000 (15:23 -0800)]
altos/chaoskey: Encode both hardware and software versions in product ID

We have no other way of reporting the software version, so just encode
it in the product ID.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/stmf0: Fix location of device_id register
Keith Packard [Mon, 15 Feb 2016 22:04:04 +0000 (14:04 -0800)]
altos/stmf0: Fix location of device_id register

Copied from stm32l and never fixed.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Another fix for non CDC-ACM devices
Keith Packard [Tue, 9 Feb 2016 03:15:31 +0000 (19:15 -0800)]
altos: Another fix for non CDC-ACM devices

Need to set the bInterfaceNumber for the actual interface to zero when
there isn't an INT interface before it.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoClean up stmf0 adc init.
Bart Massey [Tue, 9 Feb 2016 02:55:28 +0000 (18:55 -0800)]
Clean up stmf0 adc init.

This better matches the documented cal sequence.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/stmf0: Add missing ao_gpio.c
Keith Packard [Mon, 8 Feb 2016 06:30:27 +0000 (22:30 -0800)]
altos/stmf0: Add missing ao_gpio.c

This contains the code for power managing the GPIO pins

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Add simple stats test to TRNG code
Keith Packard [Mon, 8 Feb 2016 06:28:34 +0000 (22:28 -0800)]
altos: Add simple stats test to TRNG code

This detects broken hardware by making sure the standard deviation in
the raw values used to compute each buffer is at least 128.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Delay TRNG ADC long enough for HV supply to stabilize
Keith Packard [Sun, 7 Feb 2016 23:33:42 +0000 (15:33 -0800)]
altos: Delay TRNG ADC long enough for HV supply to stabilize

Looks like it takes about 70ms for the supply to start running right,
so delay after powering it up for that long.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/chaoskey-v0.1: Add power management and change USB classes
Keith Packard [Sat, 6 Feb 2016 13:15:47 +0000 (00:15 +1100)]
altos/chaoskey-v0.1: Add power management and change USB classes

Enable power management.
Expose only a single IN endpoint.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Add power management to TRNG driver
Keith Packard [Sat, 6 Feb 2016 13:14:22 +0000 (00:14 +1100)]
altos: Add power management to TRNG driver

Support suspend/resume of the TRNG power supply, delaying after resume
to wait for it to stabilize.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Allow USB drivers to skip CDC-ACM -specific descriptors
Keith Packard [Sat, 6 Feb 2016 13:10:57 +0000 (00:10 +1100)]
altos: Allow USB drivers to skip CDC-ACM -specific descriptors

For devices not providing the standard CDC-ACM interface, let them
skip the various descriptors and interfaces to provide a more limited
set of capabilities.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/stmf0: Add suspend/resume support
Keith Packard [Sat, 6 Feb 2016 11:51:32 +0000 (22:51 +1100)]
altos/stmf0: Add suspend/resume support

Allow USB suspend to suspend USB, GPIOs and master clock.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Add power management APIs
Keith Packard [Sat, 6 Feb 2016 11:47:23 +0000 (22:47 +1100)]
altos: Add power management APIs

This provides sequenced suspend/resume functionality, allowing modules
to register for power management at configuration time.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/stmf0: Allow projects to specify non-default stack size
Keith Packard [Wed, 20 Jan 2016 07:55:52 +0000 (23:55 -0800)]
altos/stmf0: Allow projects to specify non-default stack size

512 may not be suitable for everyone.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: remove blank line in stmf0/ao_timer.c
Keith Packard [Wed, 20 Jan 2016 07:55:32 +0000 (23:55 -0800)]
altos: remove blank line in stmf0/ao_timer.c

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/chaoskey: Delay ADC reading for 250ms at startup
Keith Packard [Thu, 28 Jan 2016 21:58:43 +0000 (13:58 -0800)]
altos/chaoskey: Delay ADC reading for 250ms at startup

This lets the HV supply stabilize before we start sampling values.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos/chaoskey: Add support for flipping between raw and cooked bits
Keith Packard [Thu, 28 Jan 2016 08:14:36 +0000 (00:14 -0800)]
altos/chaoskey: Add support for flipping between raw and cooked bits

Plug the 'force bootloader' thing onto the board while it's running
and it will generate raw bits instead of running them through the CRC
to whiten. Useful for validating the raw hardware.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agosrc/chaoskey-v0.1: Add HV enable support
Keith Packard [Wed, 20 Jan 2016 02:30:57 +0000 (18:30 -0800)]
src/chaoskey-v0.1: Add HV enable support

Turn on the HV supply when the OS starts.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agofix argument to ao-cal-freq so devices other than /dev/ttyACM0 work
Robert Garbee [Sat, 16 Jan 2016 17:19:47 +0000 (10:19 -0700)]
fix argument to ao-cal-freq so devices other than /dev/ttyACM0 work

4 years agoReleasing: Copy TeleMega v2.0 bits to Binaries
Keith Packard [Mon, 11 Jan 2016 05:39:38 +0000 (21:39 -0800)]
Releasing: Copy TeleMega v2.0 bits to Binaries

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoprocess updates from 1.6.1 release
Bdale Garbee [Thu, 16 Jul 2015 20:47:10 +0000 (14:47 -0600)]
process updates from 1.6.1 release

4 years agoone more time, with feeling .. this time, I've updated pdclib
Bdale Garbee [Mon, 11 Jan 2016 02:06:19 +0000 (19:06 -0700)]
one more time, with feeling .. this time, I've updated pdclib

4 years agosubmodule madness
Bdale Garbee [Mon, 11 Jan 2016 01:58:31 +0000 (18:58 -0700)]
submodule madness

4 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Mon, 11 Jan 2016 01:29:07 +0000 (18:29 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

4 years agodoc: Remove extraneous 'first off' from legal paragraph
Keith Packard [Mon, 11 Jan 2016 01:22:35 +0000 (17:22 -0800)]
doc: Remove extraneous 'first off' from legal paragraph

Not helpful (bdale)

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Remove telemini v2.0. Add telemega v2.0
Keith Packard [Mon, 11 Jan 2016 01:13:56 +0000 (17:13 -0800)]
doc: Remove telemini v2.0. Add telemega v2.0

Reflect hardware we've actually shipped.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: fix typo in using external active switch circuit section
Keith Packard [Mon, 11 Jan 2016 01:01:57 +0000 (17:01 -0800)]
doc: fix typo in using external active switch circuit section

the -> then (bdale)

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Update copyright year in altusmetrum doc
Keith Packard [Mon, 11 Jan 2016 00:59:37 +0000 (16:59 -0800)]
doc: Update copyright year in altusmetrum doc

And note that this need to be checked for each release in RELNOTES

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agomodify release procedure to reflect Keith setting version in confgure.ac
Bdale Garbee [Mon, 11 Jan 2016 00:45:45 +0000 (17:45 -0700)]
modify release procedure to reflect Keith setting version in confgure.ac

4 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Mon, 11 Jan 2016 00:44:03 +0000 (17:44 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

4 years agomodify bringup scripts to handle TeleMega v2.0
Bdale Garbee [Mon, 11 Jan 2016 00:43:34 +0000 (17:43 -0700)]
modify bringup scripts to handle TeleMega v2.0

4 years agoBump version to 1.6.2, altosdroid to 10
Keith Packard [Sun, 10 Jan 2016 22:37:05 +0000 (14:37 -0800)]
Bump version to 1.6.2, altosdroid to 10

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agonow building for m4, too
Bdale Garbee [Mon, 11 Jan 2016 00:41:38 +0000 (17:41 -0700)]
now building for m4, too

4 years agonew build dependency on asciidoc
Bdale Garbee [Mon, 11 Jan 2016 00:38:26 +0000 (17:38 -0700)]
new build dependency on asciidoc

4 years agoaltos: Switch PWM constants to end up exposing µsec
Keith Packard [Sun, 10 Jan 2016 23:56:21 +0000 (15:56 -0800)]
altos: Switch PWM constants to end up exposing µsec

This changes the constants so the clock runs at 1MHz, making the step
1µsec each. Then make the period 20000 steps, or 20ms for a 50Hz
frequency as before.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Set TeleMega v2.0 PWM to support servos
Keith Packard [Sun, 10 Jan 2016 23:44:08 +0000 (15:44 -0800)]
altos: Set TeleMega v2.0 PWM to support servos

Typical servos use a 50Hz signal with less than 10% duty cycle. Set
the divider to 10 and the range to 64000 to provide a reasonable level
of detail down in the low range.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoAdd release notes for 1.6.2
Keith Packard [Sun, 10 Jan 2016 19:44:17 +0000 (11:44 -0800)]
Add release notes for 1.6.2

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoUpdate java library versions
Keith Packard [Sun, 10 Jan 2016 20:30:34 +0000 (12:30 -0800)]
Update java library versions

altoslib is API incompatible with 1.6.1 release due to altos.state updates.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltoslib: Remove debug message from AltosMap
Keith Packard [Sun, 10 Jan 2016 20:30:11 +0000 (12:30 -0800)]
altoslib: Remove debug message from AltosMap

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoElide flight computer info from APRS section of TeleGPS manual
Keith Packard [Sun, 10 Jan 2016 20:21:24 +0000 (12:21 -0800)]
Elide flight computer info from APRS section of TeleGPS manual

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoElide pyro channel information from EasyMini docs
Keith Packard [Sun, 10 Jan 2016 20:15:50 +0000 (12:15 -0800)]
Elide pyro channel information from EasyMini docs

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Insert inter telemetry-packet delay
Keith Packard [Sun, 10 Jan 2016 05:33:23 +0000 (21:33 -0800)]
altos: Insert inter telemetry-packet delay

The receivers take some time to reset the radio between packets, so
make sure we don't send back-to-back telemetry too quickly by delaying
after sending each telemetry packet.

4 years agoSwitch TeleMega v2.0 to CC1200 radio chip telemega-v2
Keith Packard [Sun, 10 Jan 2016 00:28:53 +0000 (16:28 -0800)]
Switch TeleMega v2.0 to CC1200 radio chip

That's what we're using, after all

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Set AO_PWM_TIMER_SCALE for telemega-v2.0
Keith Packard [Sat, 26 Dec 2015 07:27:45 +0000 (23:27 -0800)]
altos: Set AO_PWM_TIMER_SCALE for telemega-v2.0

This is needed to configure the PWM timer correctly

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Get stm32l pwm driver working
Keith Packard [Sat, 26 Dec 2015 07:20:29 +0000 (23:20 -0800)]
altos: Get stm32l pwm driver working

Fix the CCMR1_OC1PE and CCMR2_OC3PE values.
Disable clock when no PWM outputs are running.
Fix the apb1enr value for the timer.
Set ARR value to PWM_MAX - 1 -- ARR is off by one.
Sets the GPIO pins to 40MHz bandwidth for sharper edges.

Tested on EasyMega, but that code is not included as it breaks the
companion protocol.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltos: Add TeleMega v2.0, including PWM driver
Keith Packard [Thu, 24 Dec 2015 08:28:59 +0000 (00:28 -0800)]
altos: Add TeleMega v2.0, including PWM driver

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoao-tools/ao-dbg: Stop using sigvec
Keith Packard [Wed, 23 Dec 2015 18:18:24 +0000 (10:18 -0800)]
ao-tools/ao-dbg: Stop using sigvec

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Remove some bogus bits from am.css
Keith Packard [Sat, 14 Nov 2015 08:01:05 +0000 (00:01 -0800)]
doc: Remove some bogus bits from am.css

Just commented out stuff which had a nested comment and was thus invalid

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Construct html index for documentation
Keith Packard [Sat, 14 Nov 2015 07:36:02 +0000 (23:36 -0800)]
doc: Construct html index for documentation

This gets uploaded to keith's machine as an easy way to see what's available.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Try a different trick for asciidoc build issues
Keith Packard [Sat, 14 Nov 2015 07:17:11 +0000 (23:17 -0800)]
doc: Try a different trick for asciidoc build issues

asciidoc creates temp files in the current directory using basename of
the source filename. Doing html and pdf builds in parallel causes
chaos as a result. Fix this by having the pdf target build both
serially, and then have the html target just depend on the pdf target.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Split out EasyMini into a separate manual
Keith Packard [Sat, 14 Nov 2015 06:55:35 +0000 (22:55 -0800)]
doc: Split out EasyMini into a separate manual

EasyMini uses a tiny fraction of the overall system software;
splitting the manual out makes it a lot smaller.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Reformat html versions a bit
Keith Packard [Sat, 14 Nov 2015 04:59:25 +0000 (20:59 -0800)]
doc: Reformat html versions a bit

Color more text black, including toc. Add a bit of space around the
toc. Make paragraph labels bold.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Move pad beeps table to usage chapter
Keith Packard [Sat, 14 Nov 2015 04:58:58 +0000 (20:58 -0800)]
doc: Move pad beeps table to usage chapter

This places all of the sound information in one place.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Provide more actual links instead of just chapter names
Keith Packard [Sat, 14 Nov 2015 04:58:08 +0000 (20:58 -0800)]
doc: Provide more actual links instead of just chapter names

Replace 'see chapter "foo"' with 'see <<foo>>' so that a link is
created to directly go to the relevant text.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Reformat 'Using MicroPeak' section
Keith Packard [Sat, 14 Nov 2015 04:56:45 +0000 (20:56 -0800)]
doc: Reformat 'Using MicroPeak' section

Use labeled paragraphs to make the steps stand out.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoBreak out common pieces from TeleGPS and AltusMetrum
Keith Packard [Sat, 14 Nov 2015 03:45:02 +0000 (19:45 -0800)]
Break out common pieces from TeleGPS and AltusMetrum

This creates shared files for portions of the TeleGPS and AltusMetrum
manual to avoid duplicating text between the two.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Add product logos to books
Keith Packard [Mon, 2 Nov 2015 05:05:20 +0000 (21:05 -0800)]
doc: Add product logos to books

This places the product logo on the title verso in pdf form, and above
the TOC in html form.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agoaltosui: telemini outline pdf changed name
Keith Packard [Sun, 1 Nov 2015 14:20:27 +0000 (06:20 -0800)]
altosui: telemini outline pdf changed name

It's now telemini-outline.pdf, just like the other outline files.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: verbose mode for a2x
Keith Packard [Sun, 1 Nov 2015 13:43:59 +0000 (05:43 -0800)]
doc: verbose mode for a2x

4 years agodoc: Make pdf titles less ridiculously large
Keith Packard [Sun, 1 Nov 2015 13:08:27 +0000 (05:08 -0800)]
doc: Make pdf titles less ridiculously large

Instead of having them grow at 20% per nesting level, use 10% instead.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Get images and tables all centered and labeled
Keith Packard [Sun, 1 Nov 2015 12:23:56 +0000 (04:23 -0800)]
doc: Get images and tables all centered and labeled

A bunch of images were using image: instead of image:: and some images
and tables were missing titles.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Split revhistory to separate file for html docs
Keith Packard [Sun, 1 Nov 2015 12:22:27 +0000 (04:22 -0800)]
doc: Split revhistory to separate file for html docs

This avoids having the revhistory clutter the top of the document.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Place html book contents on left side of page with separate scrollbar
Keith Packard [Sun, 1 Nov 2015 12:20:18 +0000 (04:20 -0800)]
doc: Place html book contents on left side of page with separate scrollbar

This lets the user see the toc while browsing the document

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Switch to free fonts. Publish fonts with docs.
Keith Packard [Sun, 1 Nov 2015 12:18:34 +0000 (04:18 -0800)]
doc: Switch to free fonts. Publish fonts with docs.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Minor makefile cleanups
Keith Packard [Sun, 1 Nov 2015 06:54:26 +0000 (23:54 -0700)]
doc: Minor makefile cleanups

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Convert telemetry and companion docs to asciidoc
Keith Packard [Sun, 1 Nov 2015 06:36:03 +0000 (23:36 -0700)]
doc: Convert telemetry and companion docs to asciidoc

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Convert AltOS doc to asciidoc
Keith Packard [Sun, 1 Nov 2015 05:40:13 +0000 (22:40 -0700)]
doc: Convert AltOS doc to asciidoc

It's still pretty stale, but at least it isn't in docbook?

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Finish converting docs to asciidoc format
Keith Packard [Sun, 1 Nov 2015 04:34:42 +0000 (21:34 -0700)]
doc: Finish converting docs to asciidoc format

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Add titles to all figures
Keith Packard [Sat, 31 Oct 2015 21:54:20 +0000 (14:54 -0700)]
doc: Add titles to all figures

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Add updating firmware and using am products asciidoc bits
Keith Packard [Fri, 30 Oct 2015 03:32:58 +0000 (20:32 -0700)]
doc: Add updating firmware and using am products asciidoc bits

This finishes the asciidoc transition

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Add asciidoc version of Altos Droid manual
Keith Packard [Fri, 30 Oct 2015 01:38:46 +0000 (18:38 -0700)]
doc: Add asciidoc version of Altos Droid manual

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Add asciidoc version of altosui chapter.
Keith Packard [Fri, 30 Oct 2015 01:14:38 +0000 (18:14 -0700)]
doc: Add asciidoc version of altosui chapter.

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Lots more conversion from docbook to asciidoc
Keith Packard [Thu, 29 Oct 2015 07:49:00 +0000 (16:49 +0900)]
doc: Lots more conversion from docbook to asciidoc

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Add asciidoc telemini v1.0
Keith Packard [Thu, 29 Oct 2015 06:50:31 +0000 (15:50 +0900)]
doc: Add asciidoc telemini v1.0

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Start doc transition to asciidoc
Keith Packard [Thu, 29 Oct 2015 03:12:15 +0000 (12:12 +0900)]
doc: Start doc transition to asciidoc

Signed-off-by: Keith Packard <keithp@keithp.com>
4 years agodoc: Force FOP to read images from doc directory
Keith Packard [Tue, 13 Oct 2015 20:52:32 +0000 (13:52 -0700)]
doc: Force FOP to read images from doc directory

Looks like something changed and fop is now reading from the directory
containing the source file. xmlto places that source in /tmp, making
all relative URIs fail. Fix this by creating a fop configuration file
directing it to load relative to the doc directory and then pass that
through xmlto.

Signed-off-by: Keith Packard <keithp@keithp.com>