fw/altos
7 months agoaltos/stm: Note that ao_i2c_recv_dma_isr isn't actually used
Keith Packard [Tue, 5 Feb 2019 06:35:02 +0000 (22:35 -0800)]
altos/stm: Note that ao_i2c_recv_dma_isr isn't actually used

This function resets the i2c transceiver after DMA completes, but it
hasn't ever been hooked up. Some testing would be a good idea. For
now, just add a comment and mark the function as referenced to avoid a
compiler warning.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 months agoaltos: Fix spelling of stm_dma_ch4_5_6_isr
Keith Packard [Tue, 5 Feb 2019 06:42:05 +0000 (22:42 -0800)]
altos: Fix spelling of stm_dma_ch4_5_6_isr

This spellingn error would have caused all DMA to these channels to fail.

Signed-off-by: Keith Packard <keithp@keithp.com>
7 months agoaltos: ADS124S0X driver compiles with initialization code maybe completed
Bdale Garbee [Mon, 18 Feb 2019 00:35:25 +0000 (17:35 -0700)]
altos: ADS124S0X driver compiles with initialization code maybe completed

7 months agoaltos: add initial support for TeleFireOne v2.0
Bdale Garbee [Sun, 17 Feb 2019 21:38:53 +0000 (14:38 -0700)]
altos: add initial support for TeleFireOne v2.0

8 months agoUse strip-nondeterminism to fix JAR timestamps
Keith Packard [Sun, 3 Feb 2019 20:48:45 +0000 (12:48 -0800)]
Use strip-nondeterminism to fix JAR timestamps

.jar files are just zip files, and contain dates. These will cause the
build to be non-reproducible. Use strip-nondeterminism to smash all of
these back to a fixed value.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 months agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Mon, 28 Jan 2019 20:46:59 +0000 (13:46 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

8 months agoMakefiles, too
Bdale Garbee [Mon, 28 Jan 2019 20:45:31 +0000 (13:45 -0700)]
Makefiles, too

8 months agoaltos/telefireeight-v2.0: Add flash loader Makefile
Keith Packard [Mon, 28 Jan 2019 19:35:32 +0000 (11:35 -0800)]
altos/telefireeight-v2.0: Add flash loader Makefile

Signed-off-by: Keith Packard <keithp@keithp.com>
8 months agoaltos: Delete unused config bits for telefireeight-v2.0. Add Makefile
Keith Packard [Mon, 28 Jan 2019 19:33:19 +0000 (11:33 -0800)]
altos: Delete unused config bits for telefireeight-v2.0. Add Makefile

Clean up the config and set the copyright year.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 months agoaltos: add telefireeight-v2.0 to src/Makefile and to Releasing
Bdale Garbee [Mon, 28 Jan 2019 02:20:02 +0000 (19:20 -0700)]
altos: add telefireeight-v2.0 to src/Makefile and to Releasing

8 months agoaltos: add support for telefireeight-v2.0
Bdale Garbee [Mon, 28 Jan 2019 02:16:41 +0000 (19:16 -0700)]
altos: add support for telefireeight-v2.0

9 months agodoc: add force-bootloader instructions for TeleGPS v1 and v2
Bdale Garbee [Wed, 9 Jan 2019 22:42:42 +0000 (15:42 -0700)]
doc: add force-bootloader instructions for TeleGPS v1 and v2

9 months agodoc: Fix typo in TeleBT v3 flash-force instructions
Keith Packard [Tue, 8 Jan 2019 01:15:41 +0000 (17:15 -0800)]
doc: Fix typo in TeleBT v3 flash-force instructions

taht → that

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoRemove ao-chaosread
Keith Packard [Tue, 8 Jan 2019 01:12:56 +0000 (17:12 -0800)]
Remove ao-chaosread

This program is now provided by the independent chaosread program.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agodoc: add flash-force instructions for TeleBT v3.0
Bdale Garbee [Sun, 6 Jan 2019 01:02:34 +0000 (18:02 -0700)]
doc: add flash-force instructions for TeleBT v3.0

9 months agoao-tools/ao-telem: Print out 'log_max' value. Clean up compiler warnings.
Keith Packard [Thu, 3 Jan 2019 19:59:02 +0000 (11:59 -0800)]
ao-tools/ao-telem: Print out 'log_max' value. Clean up compiler warnings.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoao-tools/ao-cal-accel: Initialize byte count var 'l'
Keith Packard [Thu, 3 Jan 2019 19:57:42 +0000 (11:57 -0800)]
ao-tools/ao-cal-accel: Initialize byte count var 'l'

When left uninitialized, the program would randomly segfault at startup.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoao-tools/ao-load: Return status from 'rewrite'
Keith Packard [Thu, 3 Jan 2019 19:55:38 +0000 (11:55 -0800)]
ao-tools/ao-load: Return status from 'rewrite'

Was just falling off the end of this function, returning a random value.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoao-tools: Fix warnings in ao-tools
Keith Packard [Thu, 3 Jan 2019 19:41:49 +0000 (11:41 -0800)]
ao-tools: Fix warnings in ao-tools

None of these appear likely to have caused actual problems.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoao-tools: Add lots of compiler warning flags to ao-tools build
Keith Packard [Thu, 3 Jan 2019 19:40:32 +0000 (11:40 -0800)]
ao-tools: Add lots of compiler warning flags to ao-tools build

This catches some uninitialized variable errors which cause
ao-cal-accel to crash (fixes coming next)

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agodoc: Update all docs to 1.9. Note this in doc/RELNOTES
Keith Packard [Thu, 3 Jan 2019 07:51:58 +0000 (23:51 -0800)]
doc: Update all docs to 1.9. Note this in doc/RELNOTES

Missed a bunch of 1.8.7 numbers due to a missing step in the release process

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoupdates to Releasing based on 1.9 release process learnings
Bdale Garbee [Thu, 3 Jan 2019 07:49:22 +0000 (00:49 -0700)]
updates to Releasing based on 1.9 release process learnings

9 months agodoc: Skip .pdf generation when asciidoctor-pdf is missing
Keith Packard [Thu, 3 Jan 2019 06:02:42 +0000 (22:02 -0800)]
doc: Skip .pdf generation when asciidoctor-pdf is missing

Not available in debian unstable yet

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoUpdate to version 1.9
Keith Packard [Mon, 31 Dec 2018 23:20:57 +0000 (15:20 -0800)]
Update to version 1.9

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoChange Releasing to reflect asciidoctor switch
Keith Packard [Mon, 31 Dec 2018 23:20:23 +0000 (15:20 -0800)]
Change Releasing to reflect asciidoctor switch

Don't need to hack .xml files anymore (yay!)

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agodoc: Add 1.9 release notes
Keith Packard [Mon, 31 Dec 2018 23:17:01 +0000 (15:17 -0800)]
doc: Add 1.9 release notes

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agodoc: Set doc version to 1.9
Keith Packard [Mon, 31 Dec 2018 23:17:42 +0000 (15:17 -0800)]
doc: Set doc version to 1.9

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agodoc: Add EasyMega v2.0 specs
Keith Packard [Mon, 31 Dec 2018 23:17:20 +0000 (15:17 -0800)]
doc: Add EasyMega v2.0 specs

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agodoc: Update doc/RELNOTES to adapt to asciidoctor change
Keith Packard [Mon, 31 Dec 2018 23:18:08 +0000 (15:18 -0800)]
doc: Update doc/RELNOTES to adapt to asciidoctor change

Moving to asciidoctor means changing our doc release process

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoAdd shipping products to fat_altos target, note that in Releasing
Keith Packard [Sun, 30 Dec 2018 22:28:07 +0000 (14:28 -0800)]
Add shipping products to fat_altos target, note that in Releasing

These bits are used to build alpha/beta releases, so they should
support all existing products.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoao-bringup: get turnon_easymega working for v2.0
Bdale Garbee [Mon, 31 Dec 2018 19:37:45 +0000 (12:37 -0700)]
ao-bringup: get turnon_easymega working for v2.0

9 months agoaltoslib: Remove spurious debug printf in AltosCalData
Keith Packard [Sun, 30 Dec 2018 22:15:51 +0000 (14:15 -0800)]
altoslib: Remove spurious debug printf in AltosCalData

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoaltos: Don't validate ADXL375 self test for maximum value
Keith Packard [Sun, 30 Dec 2018 22:11:03 +0000 (14:11 -0800)]
altos: Don't validate ADXL375 self test for maximum value

The data sheet says this is unreliable, and that we should be using an
FFT anyways.

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoaltos: Make HAS_ACCEL_DEBUG build again
Keith Packard [Sun, 30 Dec 2018 21:42:50 +0000 (13:42 -0800)]
altos: Make HAS_ACCEL_DEBUG build again

Need to not use ao_error_h_sq_avg without HAS_ACCEL

Signed-off-by: Keith Packard <keithp@keithp.com>
9 months agoupdate easymega turn-on script for v2.0
Bdale Garbee [Sun, 30 Dec 2018 22:16:29 +0000 (15:16 -0700)]
update easymega turn-on script for v2.0

11 months agodoc: Use icons for admonitions
Keith Packard [Fri, 2 Nov 2018 02:40:31 +0000 (19:40 -0700)]
doc: Use icons for admonitions

This replaces the text 'WARNING' or 'NOTE' with a suitable icon instead.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agodoc: Remove asciidoc related files
Keith Packard [Fri, 26 Oct 2018 00:01:38 +0000 (17:01 -0700)]
doc: Remove asciidoc related files

These all helped asciidoc generate documentation

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoRemove cc1111 products from 'fat_altos' list, which is used for keithp-fat
Keith Packard [Thu, 25 Oct 2018 23:56:24 +0000 (16:56 -0700)]
Remove cc1111 products from 'fat_altos' list, which is used for keithp-fat

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agodoc: Switch to asciidoctor to format docs
Keith Packard [Thu, 25 Oct 2018 23:50:17 +0000 (16:50 -0700)]
doc: Switch to asciidoctor to format docs

asciidoc and a2x are no longer actively maintained and Debian policy
encourages people to move away from them to asciidoctor.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoGenerate LED icons on the fly. Include SVG versions.
Keith Packard [Tue, 23 Oct 2018 23:07:09 +0000 (16:07 -0700)]
Generate LED icons on the fly. Include SVG versions.

This builds the required LED images from source code.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoDon't force CFLAGS from top level
Keith Packard [Mon, 22 Oct 2018 23:48:56 +0000 (16:48 -0700)]
Don't force CFLAGS from top level

Let the system defaults control this value.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoao-tools: Spelling fixes in a couple of man pages
Keith Packard [Mon, 22 Oct 2018 23:48:04 +0000 (16:48 -0700)]
ao-tools: Spelling fixes in a couple of man pages

ao-dbg.1 and ao-eeprom.1

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoAdd keywords to .desktop files
Keith Packard [Mon, 22 Oct 2018 23:47:20 +0000 (16:47 -0700)]
Add keywords to .desktop files

Makes applications easier to find with search

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltoslib: When flashing hardware, pull USB data from device if needed
Keith Packard [Sun, 21 Oct 2018 00:29:36 +0000 (17:29 -0700)]
altoslib: When flashing hardware, pull USB data from device if needed

If we fail to extract USB vid/pid and product values from the device
ROM, use the data discovered over USB when the device was originally
discovered.

Also, use the USB product to select appropriate .ihx files instead of
only using the USB vid/pid. This will help people avoid using the
wrong file when reflashing devices.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos/easymega-v2.0: Handle different mpu9250 orientation
Keith Packard [Sun, 21 Oct 2018 00:26:53 +0000 (17:26 -0700)]
altos/easymega-v2.0: Handle different mpu9250 orientation

The mpu9250 on EasyMega v2.0 is rotated 90° compared with EasyMega v1
and TeleMega IMU devices.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltoslib: Add support for EasyMega-v2
Keith Packard [Sun, 21 Oct 2018 00:24:41 +0000 (17:24 -0700)]
altoslib: Add support for EasyMega-v2

adxl375 instead of mma6555.
mpu9250 rotated 90° compared with other megas.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltoslib: Add support for TeleGPS v2
Keith Packard [Sun, 21 Oct 2018 00:22:59 +0000 (17:22 -0700)]
altoslib: Add support for TeleGPS v2

The battery voltage ADC values are different from TeleGPS v1 (max 4095
instead of 32767).

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos/adxl375: Clean up initialization, shortening self test period
Keith Packard [Sat, 20 Oct 2018 14:34:57 +0000 (07:34 -0700)]
altos/adxl375: Clean up initialization, shortening self test period

Set the self test period to that suggested in the documentation.
Eliminate some debug variables.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Sat, 20 Oct 2018 07:18:12 +0000 (01:18 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

11 months agoaltoslib: fix computation of TeleGPS battery voltage
Bdale Garbee [Sat, 20 Oct 2018 07:17:39 +0000 (01:17 -0600)]
altoslib: fix computation of TeleGPS battery voltage

11 months agoaltosui: Add EasyMega v2.0 firmware to release
Keith Packard [Fri, 19 Oct 2018 20:20:31 +0000 (13:20 -0700)]
altosui: Add EasyMega v2.0 firmware to release

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltoslib: Add ADXL375 support and EasyMega v2.0 support
Keith Packard [Fri, 19 Oct 2018 20:19:03 +0000 (13:19 -0700)]
altoslib: Add ADXL375 support and EasyMega v2.0 support

EasyMega v2.0 replaces the MMA655X with an ADXL375 part.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos: Add EasyMega v2.0 to default build
Keith Packard [Fri, 19 Oct 2018 15:41:51 +0000 (08:41 -0700)]
altos: Add EasyMega v2.0 to default build

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos/easymega-v2.0: Add adxl375, replace mpu6000 with 9250 [v2]
Keith Packard [Sat, 13 Oct 2018 16:43:25 +0000 (09:43 -0700)]
altos/easymega-v2.0: Add adxl375, replace mpu6000 with 9250 [v2]

Should reflect current hardware design now.

v2:
Use SPI mode 3 for ADXL375
Invert ADXL375 values

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos/easymega-v2.0: Change binary to easymega-v2.0 instead of easymega-v1.0
Keith Packard [Sat, 13 Oct 2018 16:46:01 +0000 (09:46 -0700)]
altos/easymega-v2.0: Change binary to easymega-v2.0 instead of easymega-v1.0

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos: Add ADXL375 driver [v2]
Keith Packard [Sat, 13 Oct 2018 16:41:31 +0000 (09:41 -0700)]
altos: Add ADXL375 driver [v2]

Includes self-test code and multi-byte mode operation for reading
sample registers.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos/stm: Support SPI modes other than 0
Keith Packard [Mon, 15 Oct 2018 18:15:31 +0000 (11:15 -0700)]
altos/stm: Support SPI modes other than 0

ADXL375 requires SPI mode 3.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos/stm: Make beeper driver support all possible tim234 configs
Keith Packard [Sat, 13 Oct 2018 20:42:34 +0000 (13:42 -0700)]
altos/stm: Make beeper driver support all possible tim234 configs

And update all users to be explicit about the desired config.

Signed-off-by: Keith Packard <keithp@keithp.com>
11 months agoaltos: Create ao_data_fill shared function
Keith Packard [Fri, 19 Oct 2018 15:12:22 +0000 (08:12 -0700)]
altos: Create ao_data_fill shared function

This fills a data ring entry with all of the current sensor values
other than the ADC. It is used in all of the adc completion functions.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: remove usbtrng support (chaoskey prototypes)
Bdale Garbee [Sat, 13 Oct 2018 16:17:47 +0000 (10:17 -0600)]
altos: remove usbtrng support (chaoskey prototypes)

12 months agoaltos: remove telescience support
Bdale Garbee [Sat, 13 Oct 2018 16:12:39 +0000 (10:12 -0600)]
altos: remove telescience support

12 months agoaltos: remove teledongle-v1.8 support (what was that, anyway?!?)
Bdale Garbee [Sat, 13 Oct 2018 16:02:13 +0000 (10:02 -0600)]
altos: remove teledongle-v1.8 support (what was that, anyway?!?)

12 months agoaltos: remove megadongle-v0.1 support, never went beyond prototype
Bdale Garbee [Sat, 13 Oct 2018 15:59:22 +0000 (09:59 -0600)]
altos: remove megadongle-v0.1 support, never went beyond prototype

12 months agoaltos: remove telepyro-v0.1 support, which was never completed anyway
Bdale Garbee [Sat, 13 Oct 2018 15:57:44 +0000 (09:57 -0600)]
altos: remove telepyro-v0.1 support, which was never completed anyway

12 months agoaltos: remove teleterra-v0.1, also an ancient cc1111 project
Bdale Garbee [Sat, 13 Oct 2018 15:55:03 +0000 (09:55 -0600)]
altos: remove teleterra-v0.1, also an ancient cc1111 project

12 months agoaltos/drivers: Use stdbool in ao_ms5607.c
Keith Packard [Sat, 13 Oct 2018 15:33:49 +0000 (08:33 -0700)]
altos/drivers: Use stdbool in ao_ms5607.c

We don't have TRUE and FALSE anymore (they were pdclib specific).

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Remove pdclib bits from Makefile
Keith Packard [Sat, 13 Oct 2018 15:27:41 +0000 (08:27 -0700)]
altos: Remove pdclib bits from Makefile

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoRemove .gitmodules
Keith Packard [Sat, 13 Oct 2018 15:27:17 +0000 (08:27 -0700)]
Remove .gitmodules

We no longer use submodules (yay!)

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoBump version to 1.8.7.1
Keith Packard [Sat, 13 Oct 2018 15:26:02 +0000 (08:26 -0700)]
Bump version to 1.8.7.1

Tag development versions

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4-disco: Start hooking up stm32f413 USB for the disco board
Keith Packard [Tue, 2 Oct 2018 19:48:25 +0000 (12:48 -0700)]
altos/stm32f4-disco: Start hooking up stm32f413 USB for the disco board

Non-working as yet.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Add start of stm32f413 USB support
Keith Packard [Tue, 2 Oct 2018 19:46:19 +0000 (12:46 -0700)]
altos/stm32f4: Add start of stm32f413 USB support

This code doesn't work yet.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Add stm32f413 USART support
Keith Packard [Tue, 2 Oct 2018 19:46:01 +0000 (12:46 -0700)]
altos/stm32f4: Add stm32f413 USART support

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Add external interrupt bits
Keith Packard [Tue, 2 Oct 2018 19:45:39 +0000 (12:45 -0700)]
altos/stm32f4: Add external interrupt bits

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Add more stm32f413 definitions and support code
Keith Packard [Tue, 2 Oct 2018 19:44:58 +0000 (12:44 -0700)]
altos/stm32f4: Add more stm32f413 definitions and support code

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Clean up AO_ROMCONFIG bits
Keith Packard [Wed, 12 Sep 2018 01:53:15 +0000 (18:53 -0700)]
altos: Clean up AO_ROMCONFIG bits

Remove address parameter (doesn't work with gcc), create shared
ao_romconfig in kernel.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4-disco: Hook up serial console. Add scheme
Keith Packard [Wed, 12 Sep 2018 01:51:59 +0000 (18:51 -0700)]
altos/stm32f4-disco: Hook up serial console. Add scheme

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Place ARM.exidx sections after .text
Keith Packard [Wed, 12 Sep 2018 01:50:45 +0000 (18:50 -0700)]
altos/stm32f4: Place ARM.exidx sections after .text

This makes the linker happy about not attempting to merge unordered
and ordered stuff (whatever that means...)

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Use full printf/scanf (including floats)
Keith Packard [Wed, 12 Sep 2018 01:50:15 +0000 (18:50 -0700)]
altos/stm32f4: Use full printf/scanf (including floats)

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Add usart driver for usart6
Keith Packard [Wed, 12 Sep 2018 01:49:22 +0000 (18:49 -0700)]
altos/stm32f4: Add usart driver for usart6

This is what the disco board hooks up.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Align stack to 8 bytes
Keith Packard [Wed, 12 Sep 2018 01:46:52 +0000 (18:46 -0700)]
altos/stm32f4: Align stack to 8 bytes

This makes sure that doubles are aligned properly when passed on the stack.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4-disco: Add .gitignore
Keith Packard [Tue, 11 Sep 2018 19:03:27 +0000 (12:03 -0700)]
altos/stm32f4-disco: Add .gitignore

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Add generic LED driver.
Keith Packard [Tue, 11 Sep 2018 18:57:50 +0000 (11:57 -0700)]
altos: Add generic LED driver.

This driver uses the generic GPIO functions and allows per-LED port
and pin configuration. It supports up to 32 LEDs.

Rename SoC-specific LED drivers.

Remove enabled parameter to ao_led_init

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Eliminate 'pin' field from GPIO functions
Keith Packard [Tue, 11 Sep 2018 17:40:24 +0000 (10:40 -0700)]
altos: Eliminate 'pin' field from GPIO functions

This was used with the 8051 bit-addressing mode to provide
single-instruction access to GPIO pins.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Fix clock configuration
Keith Packard [Tue, 11 Sep 2018 08:28:03 +0000 (01:28 -0700)]
altos/stm32f4: Fix clock configuration

Was running the PLL input too slow (it wants 2MHz).
Was configuring the PLL_P factor wrong (needs magic values, not P
value)

Set up clock debugging for PA8 and PC9 output. Enable on disco board
for debugging.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Add STM32F413 disco board support
Keith Packard [Tue, 11 Sep 2018 07:08:17 +0000 (00:08 -0700)]
altos/stm32f4: Add STM32F413 disco board support

Discovery development board

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm32f4: Start adding support for STM32F413
Keith Packard [Tue, 11 Sep 2018 07:07:38 +0000 (00:07 -0700)]
altos/stm32f4: Start adding support for STM32F413

Enough to get clocks lit up at least.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Remove 8051-ism from ao_usb.h
Keith Packard [Tue, 2 Oct 2018 19:47:00 +0000 (12:47 -0700)]
altos: Remove 8051-ism from ao_usb.h

__at doesn't exist for non-8051

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Delete random 8051 ISR declarations
Keith Packard [Tue, 11 Sep 2018 07:05:38 +0000 (00:05 -0700)]
altos: Delete random 8051 ISR declarations

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Allow application-specific prompts for ao_cmd_readline
Keith Packard [Thu, 16 Aug 2018 05:44:17 +0000 (22:44 -0700)]
altos: Allow application-specific prompts for ao_cmd_readline

Lets other readline users specify alternate prompts.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Use stdbool true/false instead of TRUE/FALSE
Keith Packard [Thu, 16 Aug 2018 02:17:19 +0000 (19:17 -0700)]
altos: Use stdbool true/false instead of TRUE/FALSE

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Make cmd number parsing functions return value
Keith Packard [Thu, 16 Aug 2018 02:13:45 +0000 (19:13 -0700)]
altos: Make cmd number parsing functions return value

Don't use a global variable to hold the result.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Remove 8051 address space specifiers
Keith Packard [Thu, 16 Aug 2018 00:47:37 +0000 (17:47 -0700)]
altos: Remove 8051 address space specifiers

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Remove *_TO_DATA macros
Keith Packard [Thu, 16 Aug 2018 00:34:20 +0000 (17:34 -0700)]
altos: Remove *_TO_DATA macros

Now that we don't support 8051, we don't need these

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoRemove pdclib
Keith Packard [Wed, 15 Aug 2018 22:39:34 +0000 (15:39 -0700)]
Remove pdclib

12 months agoaltos: Switch to newlib-nano for libc on arm
Keith Packard [Sun, 5 Aug 2018 04:23:22 +0000 (12:23 +0800)]
altos: Switch to newlib-nano for libc on arm

Stop using pdclib

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: Remove cc1111 products
Keith Packard [Sun, 5 Aug 2018 04:17:19 +0000 (12:17 +0800)]
altos: Remove cc1111 products

We're not testing these anyways; building new firmware for them is not helpful.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: use %lu for APRS altitude in sprintf
Keith Packard [Tue, 11 Sep 2018 07:06:44 +0000 (00:06 -0700)]
altos: use %lu for APRS altitude in sprintf

It's a long.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos/stm: Make flash loader work with either 8MHz or 16MHz xtal
Keith Packard [Sat, 13 Oct 2018 14:50:59 +0000 (07:50 -0700)]
altos/stm: Make flash loader work with either 8MHz or 16MHz xtal

Provide PLL definitions for both values.

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltosdroid: Bump version to 18 for 1.8.7
Keith Packard [Sat, 13 Oct 2018 14:44:10 +0000 (07:44 -0700)]
altosdroid: Bump version to 18 for 1.8.7

Signed-off-by: Keith Packard <keithp@keithp.com>
12 months agoaltos: first cut at easymega v2.0 support .. nothing working yet
Bdale Garbee [Sat, 13 Oct 2018 05:32:57 +0000 (23:32 -0600)]
altos: first cut at easymega v2.0 support .. nothing working yet