doc: Add screen shots everywhere
authorKeith Packard <keithp@keithp.com>
Wed, 18 Dec 2013 04:05:12 +0000 (20:05 -0800)
committerKeith Packard <keithp@keithp.com>
Wed, 18 Dec 2013 04:05:12 +0000 (20:05 -0800)
This has screen shots of every dialog in altosui

Signed-off-by: Keith Packard <keithp@keithp.com>
22 files changed:
doc/Makefile
doc/altosui.png [new file with mode: 0644]
doc/altusmetrum.xsl
doc/ascent.png [new file with mode: 0644]
doc/configure-altimeter.png [new file with mode: 0644]
doc/configure-altosui.png [new file with mode: 0644]
doc/configure-groundstation.png [new file with mode: 0644]
doc/configure-pyro.png [new file with mode: 0644]
doc/descent.png [new file with mode: 0644]
doc/device-selection.png [new file with mode: 0644]
doc/fire-igniter.png [new file with mode: 0644]
doc/graph-configure.png [new file with mode: 0644]
doc/graph-map.png [new file with mode: 0644]
doc/graph-stats.png [new file with mode: 0644]
doc/graph.png [new file with mode: 0644]
doc/landed.png [new file with mode: 0644]
doc/launch-pad.png [new file with mode: 0644]
doc/load-maps.png [new file with mode: 0644]
doc/scan-channels.png [new file with mode: 0644]
doc/site-map.png [new file with mode: 0644]
doc/table.png [new file with mode: 0644]
doc/xorg-fo.xsl

index c45e084..f586ad1 100644 (file)
@@ -14,6 +14,37 @@ RELNOTES=\
        release-notes-1.2.1.html \
        release-notes-1.3.html
 
+PICTURES=\
+       altosui.png \
+       ascent.png \
+       configure-altimeter.png \
+       configure-altosui.png \
+       configure-groundstation.png \
+       configure-pyro.png \
+       descent.png \
+       device-selection.png \
+       easymini-top.jpg \
+       fire-igniter.png \
+       graph-configure.png \
+       graph-map.png \
+       graph.png \
+       graph-stats.png \
+       landed.png \
+       launch-pad.png \
+       load-maps.png \
+       scan-channels.png \
+       site-map.png \
+       table.png \
+       telemega-v1.0-top.jpg \
+       telemetrum-v1.1-thside.jpg \
+       telemini-v1-top.jpg \
+       telemini-v2-top.jpg
+SVG=\
+       easymini-outline.svg \
+       telemega-outline.svg \
+       telemetrum.svg \
+       telemini.svg
+
 RELNOTES_XSL=$(RELNOTES:.html=.xsl)
 HTML=altusmetrum.html altos.html telemetry.html companion.html micropeak.html $(RELNOTES)
 PDF=altusmetrum.pdf altos.pdf telemetry.pdf companion.pdf micropeak.pdf
@@ -21,7 +52,7 @@ DOC=$(HTML) $(PDF)
 HTMLSTYLE=/usr/share/xml/docbook/stylesheet/docbook-xsl/html/docbook.xsl
 FOSTYLE=xorg-fo.xsl
 PDFSTYLE=
-IMAGES=telemetrum.svg telemini.svg
+IMAGES=$(PICTURES) $(SVG)
 
 .SUFFIXES: .xsl .html .pdf
 
diff --git a/doc/altosui.png b/doc/altosui.png
new file mode 100644 (file)
index 0000000..3dd28de
Binary files /dev/null and b/doc/altosui.png differ
index 8725da0..dfe8943 100644 (file)
@@ -5,11 +5,6 @@
   <title>The Altus Metrum System</title>
   <subtitle>An Owner's Manual for Altus Metrum Rocketry Electronics</subtitle>
   <bookinfo>
-    <mediaobject>
-      <imageobject>
-       <imagedata fileref="../altosui/altusmetrum.jpg" role="top"/>
-      </imageobject>
-    </mediaobject>
     <author>
       <firstname>Bdale</firstname>
       <surname>Garbee</surname>
@@ -551,11 +546,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>TeleMetrum</title>
-      <mediaobject>
-       <imageobject>
-         <imagedata fileref="telemetrum-v1.1-thside.jpg" width="5.5in" scalefit="1"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="telemetrum-v1.1-thside.jpg" width="5.5in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
        TeleMetrum is a 1 inch by 2¾ inch circuit board.  It was designed to
        fit inside coupler for 29mm air-frame tubing, but using it in a tube that
@@ -571,11 +568,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>TeleMini</title>
-      <mediaobject>
-       <imageobject>
-         <imagedata fileref="telemini-v1-top.jpg" width="5.5in" scalefit="1"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="telemini-v1-top.jpg" width="5.5in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
        TeleMini v1.0 is ½ inches by 1½ inches.  It was
        designed to fit inside an 18mm air-frame tube, but using it in
@@ -590,11 +589,13 @@ NAR #88757, TRA #12200
        the board, meaning an ideal “simple” avionics bay for TeleMini
        should have at least 9 inches of interior length.
       </para>
-      <mediaobject>
-       <imageobject>
-         <imagedata fileref="telemini-v2-top.jpg" width="5.5in" scalefit="1"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="telemini-v2-top.jpg" width="5.5in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
        TeleMini v2.0 is 0.8 inches by 1½ inches. It adds more
        on-board data logging memory, a built-in USB connector and
@@ -605,11 +606,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>EasyMini</title>
-      <mediaobject>
-       <imageobject>
-         <imagedata fileref="easymini-top.jpg" width="5.5in" scalefit="1"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="easymini-top.jpg" width="5.5in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
        EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
        designed to fit in a 24mm coupler tube. The connectors and
@@ -619,11 +622,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>TeleMega</title>
-      <mediaobject>
-       <imageobject>
-         <imagedata fileref="telemega-v1.0-top.jpg" width="5.5in" scalefit="1"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="telemega-v1.0-top.jpg" width="5.5in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
        TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
        designed to easily fit in a 38mm coupler. Like TeleMetrum,
@@ -1356,6 +1361,13 @@ NAR #88757, TRA #12200
   </chapter>
   <chapter>
     <title>AltosUI</title>
+    <informalfigure>
+      <mediaobject>
+       <imageobject>
+         <imagedata fileref="altosui.png" width="5.5in"/>
+       </imageobject>
+      </mediaobject>
+    </informalfigure>
     <para>
       The AltosUI program provides a graphical user interface for
       interacting with the Altus Metrum product family. AltosUI can
@@ -1365,11 +1377,6 @@ NAR #88757, TRA #12200
       is split into sections, each of which documents one of the tasks
       provided from the top-level toolbar.
     </para>
-    <mediaobject>
-      <imageobject>
-       <imagedata fileref="altosui.png" width="5.5in"/>
-      </imageobject>
-    </mediaobject>
     <section>
       <title>Monitor Flight</title>
       <subtitle>Receive, Record and Display Telemetry Data</subtitle>
@@ -1379,6 +1386,13 @@ NAR #88757, TRA #12200
         AltosUI will create a window to display telemetry data as
         received by the selected TeleDongle device.
       </para>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="device-selection.png" width="3.5in"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
         All telemetry data received are automatically recorded in
         suitable log files. The name of the files includes the current
@@ -1447,6 +1461,13 @@ NAR #88757, TRA #12200
       </para>
       <section>
         <title>Launch Pad</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="launch-pad.png" width="5.5in"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
         <para>
           The 'Launch Pad' tab shows information used to decide when the
           rocket is ready for flight. The first elements include red/green
@@ -1539,6 +1560,13 @@ NAR #88757, TRA #12200
       </section>
       <section>
         <title>Ascent</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="ascent.png" width="5.5in"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
         <para>
           This tab is shown during Boost, Fast and Coast
           phases. The information displayed here helps monitor the
@@ -1565,6 +1593,13 @@ NAR #88757, TRA #12200
       </section>
       <section>
         <title>Descent</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="descent.png" width="5.5in"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
         <para>
           Once the rocket has reached apogee and (we hope) activated the
           apogee charge, attention switches to tracking the rocket on
@@ -1601,6 +1636,13 @@ NAR #88757, TRA #12200
       </section>
       <section>
         <title>Landed</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="landed.png" width="5.5in"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
         <para>
           Once the rocket is on the ground, attention switches to
           recovery. While the radio signal is often lost once the
@@ -1636,8 +1678,32 @@ NAR #88757, TRA #12200
          graph window for the current flight.
        </para>
       </section>
+      <section>
+       <title>Table</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="table.png" width="5.5in"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
+       <para>
+         The table view shows all of the data available from the
+         flight computer. Probably the most useful data on
+         this tab is the detailed GPS information, which includes
+         horizontal dilution of precision information, and
+         information about the signal being received from the satellites.
+       </para>
+      </section>
       <section>
         <title>Site Map</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="site-map.png" width="5.5in"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
         <para>
           When the TeleMetrum has a GPS fix, the Site Map tab will map
           the rocket's position to make it easier for you to locate the
@@ -1721,50 +1787,28 @@ NAR #88757, TRA #12200
         .eeprom file containing flight data saved from
         flash memory.
       </para>
+      <para>
+        Note that telemetry files will generally produce poor graphs
+        due to the lower sampling rate and missed telemetry packets.
+        Use saved flight data in .eeprom files for graphing where possible.
+      </para>
       <para>
         Once a flight record is selected, a window with multiple tabs is
         opened.
-       <variablelist>
-         <varlistentry>
-           <term>Flight Graph</term>
-           <listitem>
-             <para>
-               By default, the graph contains acceleration (blue),
-               velocity (green) and altitude (red).
-             </para>
-           </listitem>
-         </varlistentry>
-         <varlistentry>
-           <term>Configure Graph</term>
-           <listitem>
-             <para>
-               This selects which graph elements to show, and, at the
-               very bottom, lets you switch between metric and
-               imperial units
-             </para>
-           </listitem>
-         </varlistentry>
-         <varlistentry>
-           <term>Flight Statistics</term>
-           <listitem>
-             <para>
-               Shows overall data computed from the flight.
-             </para>
-           </listitem>
-         </varlistentry>
-         <varlistentry>
-           <term>Map</term>
-           <listitem>
-             <para>
-               Shows a satellite image of the flight area overlaid
-               with the path of the flight. The red concentric
-               circles mark the launch pad, the black concentric
-               circles mark the landing location.
-             </para>
-           </listitem>
-         </varlistentry>
-       </variablelist>
       </para>
+      <section>
+       <title>Flight Graph</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="graph.png" width="5.5in" scalefit="1"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
+       <para>
+         By default, the graph contains acceleration (blue),
+         velocity (green) and altitude (red).
+       </para>
       <para>
         The graph can be zoomed into a particular area by clicking and
         dragging down and to the right. Once zoomed, the graph can be
@@ -1773,11 +1817,51 @@ NAR #88757, TRA #12200
         The right mouse button causes a pop-up menu to be displayed, giving
         you the option save or print the plot.
       </para>
-      <para>
-        Note that telemetry files will generally produce poor graphs
-        due to the lower sampling rate and missed telemetry packets.
-        Use saved flight data in .eeprom files for graphing where possible.
-      </para>
+      </section>
+      <section>
+       <title>Configure Graph</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="graph-configure.png" width="5.5in" scalefit="1"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
+       <para>
+         This selects which graph elements to show, and, at the
+         very bottom, lets you switch between metric and
+         imperial units
+       </para>
+      </section>
+      <section>
+       <title>Flight Statistics</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="graph-stats.png" width="5.5in" scalefit="1"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
+       <para>
+         Shows overall data computed from the flight.
+       </para>
+      </section>
+      <section>
+       <title>Map</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="graph-map.png" width="5.5in" scalefit="1"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
+       <para>
+         Shows a satellite image of the flight area overlaid
+         with the path of the flight. The red concentric
+         circles mark the launch pad, the black concentric
+         circles mark the landing location.
+       </para>
+      </section>
     </section>
     <section>
       <title>Export Data</title>
@@ -1821,6 +1905,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>Configure Altimeter</title>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="configure-altimeter.png" width="3in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
         Select this button and then select either an altimeter or
         TeleDongle Device from the list provided. Selecting a TeleDongle
@@ -2037,6 +2128,13 @@ NAR #88757, TRA #12200
       </section>
       <section>
        <title>Configure Pyro Channels</title>
+       <informalfigure>
+         <mediaobject>
+           <imageobject>
+             <imagedata fileref="configure-pyro.png" width="6in" scalefit="1"/>
+           </imageobject>
+         </mediaobject>
+       </informalfigure>
        <para>
          This opens a separate window to configure the additional
          pyro channels available on TeleMega.  One column is
@@ -2064,6 +2162,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>Configure AltosUI</title>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="configure-altosui.png" width="2.5in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
         This button presents a dialog so that you can configure the AltosUI global settings.
       </para>
@@ -2075,18 +2180,24 @@ NAR #88757, TRA #12200
           the current flight status. However, sometimes you don't want
           to hear them.
         </para>
-        <itemizedlist>
-          <listitem>
-            <para>Enable—turns all voice announcements on and off</para>
-          </listitem>
-          <listitem>
-            <para>
-              Test Voice—Plays a short message allowing you to verify
-              that the audio system is working and the volume settings
-              are reasonable
-            </para>
-          </listitem>
-        </itemizedlist>
+        <variablelist>
+         <varlistentry>
+           <term>Enable</term>
+           <listitem>
+             <para>Turns all voice announcements on and off</para>
+           </listitem>
+         </varlistentry>
+         <varlistentry>
+           <term>Test Voice</term>
+           <listitem>
+             <para>
+               Plays a short message allowing you to verify
+               that the audio system is working and the volume settings
+               are reasonable
+             </para>
+           </listitem>
+         </varlistentry>
+        </variablelist>
       </section>
       <section>
         <title>Log Directory</title>
@@ -2161,6 +2272,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>Configure Groundstation</title>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="configure-groundstation.png" width="3in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
         Select this button and then select a TeleDongle Device from the list provided.
       </para>
@@ -2246,46 +2364,16 @@ NAR #88757, TRA #12200
         (self programming).  Please read the directions for flashing
         devices in the Updating Device Firmware chapter below.
       </para>
-      <para>
-       For “self programming”, connect USB to the device to be
-       programmed and push the 'Flash Image' button. That will
-       present a dialog box listing all of the connected
-       devices. Carefully select the device to be programmed.
-      </para>
-      <para>
-        For “pair programming”, once you have the programmer and
-        target devices connected, push the 'Flash Image' button. That
-        will present a dialog box listing all of the connected
-        devices. Carefully select the programmer device, not the
-        device to be programmed.
-      </para>
-      <para>
-        Next, select the image to flash to the device. These are named
-        with the product name and firmware version. The file selector
-        will start in the directory containing the firmware included
-        with the AltosUI package. Navigate to the directory containing
-        the desired firmware if it isn't there.
-      </para>
-      <para>
-        Next, a small dialog containing the device serial number and
-        RF calibration values should appear. If these values are
-        incorrect (possibly due to a corrupted image in the device),
-        enter the correct values here.
-      </para>
-      <para>
-        Finally, a dialog containing a progress bar will follow the
-        programming process.
-      </para>
-      <para>
-        When programming is complete, the target device will
-        reboot. Note that if a pair programmed target device is
-        connected via USB, you will have to unplug it and then plug it
-        back in for the USB connection to reset so that you can
-        communicate with the device again.
-      </para>
     </section>
     <section>
       <title>Fire Igniter</title>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="fire-igniter.png" width="1in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
        This activates the igniter circuits in the flight computer to help 
        test recovery systems deployment. Because this command can operate
@@ -2313,6 +2401,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>Scan Channels</title>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="scan-channels.png" width="2.75in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
        This listens for telemetry packets on all of the configured
        frequencies, displaying information about each device it
@@ -2324,6 +2419,13 @@ NAR #88757, TRA #12200
     </section>
     <section>
       <title>Load Maps</title>
+      <informalfigure>
+       <mediaobject>
+         <imageobject>
+           <imagedata fileref="load-maps.png" width="5.5in" scalefit="1"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
       <para>
        Before heading out to a new launch site, you can use this to
        load satellite images in case you don't have internet
@@ -3978,11 +4080,13 @@ NAR #88757, TRA #12200
        TeleMega has overall dimensions of 1.250 x 3.250 inches, and
        the mounting holes are sized for use with 4-40 or M3 screws.
       </para>
-      <mediaobject id="TeleMegaTemplate">
-       <imageobject>
-         <imagedata format="SVG" fileref="telemega-outline.svg"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject id="TeleMegaTemplate">
+         <imageobject>
+           <imagedata format="SVG" fileref="telemega-outline.svg"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
     </section>
     <section>
       <title>TeleMetrum template</title>
@@ -3990,11 +4094,13 @@ NAR #88757, TRA #12200
        TeleMetrum has overall dimensions of 1.000 x 2.750 inches, and the
        mounting holes are sized for use with 4-40 or M3 screws.
       </para>
-      <mediaobject id="TeleMetrumTemplate">
-       <imageobject>
-         <imagedata format="SVG" fileref="telemetrum.svg"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject id="TeleMetrumTemplate">
+         <imageobject>
+           <imagedata format="SVG" fileref="telemetrum.svg"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
     </section>
     <section>
       <title>TeleMini v2/EasyMini template</title>
@@ -4002,11 +4108,13 @@ NAR #88757, TRA #12200
        TeleMini v2 and EasyMini have overall dimensions of 0.800 x 1.500 inches, and the
        mounting holes are sized for use with 4-40 or M3 screws.
       </para>
-      <mediaobject id="MiniTemplate">
-       <imageobject>
-         <imagedata format="SVG" fileref="easymini-outline.svg"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject id="MiniTemplate">
+         <imageobject>
+           <imagedata format="SVG" fileref="easymini-outline.svg"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
     </section>
     <section>
       <title>TeleMini v1 template</title>
@@ -4014,11 +4122,13 @@ NAR #88757, TRA #12200
        TeleMini has overall dimensions of 0.500 x 1.500 inches, and the
        mounting holes are sized for use with 2-56 or M2 screws.
       </para>
-      <mediaobject id="TeleMiniTemplate">
-       <imageobject>
-         <imagedata format="SVG" fileref="telemini.svg"/>
-       </imageobject>
-      </mediaobject>
+      <informalfigure>
+       <mediaobject id="TeleMiniTemplate">
+         <imageobject>
+           <imagedata format="SVG" fileref="telemini.svg"/>
+         </imageobject>
+       </mediaobject>
+      </informalfigure>
     </section>
   </appendix>
   <appendix>
diff --git a/doc/ascent.png b/doc/ascent.png
new file mode 100644 (file)
index 0000000..fd1cd09
Binary files /dev/null and b/doc/ascent.png differ
diff --git a/doc/configure-altimeter.png b/doc/configure-altimeter.png
new file mode 100644 (file)
index 0000000..afb1932
Binary files /dev/null and b/doc/configure-altimeter.png differ
diff --git a/doc/configure-altosui.png b/doc/configure-altosui.png
new file mode 100644 (file)
index 0000000..43fd400
Binary files /dev/null and b/doc/configure-altosui.png differ
diff --git a/doc/configure-groundstation.png b/doc/configure-groundstation.png
new file mode 100644 (file)
index 0000000..9f836e7
Binary files /dev/null and b/doc/configure-groundstation.png differ
diff --git a/doc/configure-pyro.png b/doc/configure-pyro.png
new file mode 100644 (file)
index 0000000..4f03c0a
Binary files /dev/null and b/doc/configure-pyro.png differ
diff --git a/doc/descent.png b/doc/descent.png
new file mode 100644 (file)
index 0000000..0c479e7
Binary files /dev/null and b/doc/descent.png differ
diff --git a/doc/device-selection.png b/doc/device-selection.png
new file mode 100644 (file)
index 0000000..ffd067d
Binary files /dev/null and b/doc/device-selection.png differ
diff --git a/doc/fire-igniter.png b/doc/fire-igniter.png
new file mode 100644 (file)
index 0000000..8580457
Binary files /dev/null and b/doc/fire-igniter.png differ
diff --git a/doc/graph-configure.png b/doc/graph-configure.png
new file mode 100644 (file)
index 0000000..b588833
Binary files /dev/null and b/doc/graph-configure.png differ
diff --git a/doc/graph-map.png b/doc/graph-map.png
new file mode 100644 (file)
index 0000000..fd0fb13
Binary files /dev/null and b/doc/graph-map.png differ
diff --git a/doc/graph-stats.png b/doc/graph-stats.png
new file mode 100644 (file)
index 0000000..6f5c979
Binary files /dev/null and b/doc/graph-stats.png differ
diff --git a/doc/graph.png b/doc/graph.png
new file mode 100644 (file)
index 0000000..c7c7b7d
Binary files /dev/null and b/doc/graph.png differ
diff --git a/doc/landed.png b/doc/landed.png
new file mode 100644 (file)
index 0000000..7b4f317
Binary files /dev/null and b/doc/landed.png differ
diff --git a/doc/launch-pad.png b/doc/launch-pad.png
new file mode 100644 (file)
index 0000000..a6f142d
Binary files /dev/null and b/doc/launch-pad.png differ
diff --git a/doc/load-maps.png b/doc/load-maps.png
new file mode 100644 (file)
index 0000000..dc7ea64
Binary files /dev/null and b/doc/load-maps.png differ
diff --git a/doc/scan-channels.png b/doc/scan-channels.png
new file mode 100644 (file)
index 0000000..bf6b6e5
Binary files /dev/null and b/doc/scan-channels.png differ
diff --git a/doc/site-map.png b/doc/site-map.png
new file mode 100644 (file)
index 0000000..a6d3f78
Binary files /dev/null and b/doc/site-map.png differ
diff --git a/doc/table.png b/doc/table.png
new file mode 100644 (file)
index 0000000..86cb988
Binary files /dev/null and b/doc/table.png differ
index 075a2d9..a36b88f 100644 (file)
     <fo:block/>
   </xsl:template>
 
+  <xsl:attribute-set name="informalfigure.properties">
+    <xsl:attribute name="text-align">center</xsl:attribute>
+  </xsl:attribute-set>
+
 </xsl:stylesheet>