src: Add easymini-v3.0
authorKeith Packard <keithp@keithp.com>
Fri, 20 May 2022 23:20:13 +0000 (16:20 -0700)
committerKeith Packard <keithp@keithp.com>
Sat, 21 May 2022 00:05:25 +0000 (17:05 -0700)
Signed-off-by: Keith Packard <keithp@keithp.com>
src/easymini-v3.0/.gitignore [new file with mode: 0644]
src/easymini-v3.0/Makefile [new file with mode: 0644]
src/easymini-v3.0/ao_easymini.c [new file with mode: 0644]
src/easymini-v3.0/ao_pins.h [new file with mode: 0644]
src/easymini-v3.0/flash-loader/Makefile [new file with mode: 0644]
src/easymini-v3.0/flash-loader/ao_pins.h [new file with mode: 0644]

diff --git a/src/easymini-v3.0/.gitignore b/src/easymini-v3.0/.gitignore
new file mode 100644 (file)
index 0000000..e5f7d58
--- /dev/null
@@ -0,0 +1,2 @@
+ao_product.h
+*.elf
diff --git a/src/easymini-v3.0/Makefile b/src/easymini-v3.0/Makefile
new file mode 100644 (file)
index 0000000..681c295
--- /dev/null
@@ -0,0 +1,81 @@
+#
+# AltOS build
+#
+#
+
+include ../lpc/Makefile.defs
+
+INC = \
+       ao.h \
+       ao_arch.h \
+       ao_arch_funcs.h \
+       ao_pins.h \
+       ao_product.h \
+       lpc.h
+
+#
+# Common AltOS sources
+#
+ALTOS_SRC = \
+       ao_interrupt.c \
+       ao_boot_chain.c \
+       ao_romconfig.c \
+       ao_product.c \
+       ao_mutex.c \
+       ao_panic.c \
+       ao_stdio.c \
+       ao_storage.c \
+       ao_report.c \
+       ao_ignite.c \
+       ao_flight.c \
+       ao_kalman.c \
+       ao_sample.c \
+       ao_data.c \
+       ao_convert_pa.c \
+       ao_convert_volt.c \
+       ao_task.c \
+       ao_log.c \
+       ao_log_mini.c \
+       ao_cmd.c \
+       ao_config.c \
+       ao_timer_lpc.c \
+       ao_exti_lpc.c \
+       ao_usb_lpc.c \
+       ao_spi_lpc.c \
+       ao_adc_lpc.c \
+       ao_beep_lpc.c \
+       ao_m25.c \
+       ao_ms5607.c
+
+PRODUCT=EasyMini-v3.0
+PRODUCT_DEF=-DEASYMINI_V_3_0
+IDPRODUCT=0x0026
+
+CFLAGS = $(PRODUCT_DEF) $(LPC_CFLAGS)
+
+PROGNAME=easymini-v3.0
+PROG=$(PROGNAME)-$(VERSION).elf
+HEX=$(PROGNAME)-$(VERSION).ihx
+
+SRC=$(ALTOS_SRC) ao_easymini.c
+OBJ=$(SRC:.c=.o)
+
+all: $(PROG) $(HEX)
+
+$(PROG): Makefile $(OBJ) altos.ld
+       $(call quiet,CC) $(LDFLAGS) -o $(PROG) $(OBJ) $(LIBS)
+
+$(OBJ): $(INC)
+
+load: $(PROG)
+       lpc-load $(PROG)
+
+distclean:     clean
+
+clean:
+       rm -f *.o $(PROGNAME)-*.elf $(PROGNAME)-*.ihx $(PROGNAME)-*.map
+       rm -f ao_product.h
+
+install:
+
+uninstall:
diff --git a/src/easymini-v3.0/ao_easymini.c b/src/easymini-v3.0/ao_easymini.c
new file mode 100644 (file)
index 0000000..05b2951
--- /dev/null
@@ -0,0 +1,47 @@
+/*
+ * Copyright © 2011 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <ao.h>
+#include <ao_exti.h>
+
+int
+main(void)
+{
+       ao_clock_init();
+       ao_task_init();
+       ao_timer_init();
+       ao_exti_init();
+
+       ao_beep_init();
+
+       ao_adc_init();
+       ao_spi_init();
+       ao_storage_init();
+
+       ao_usb_init();
+
+       ao_cmd_init();
+       ao_flight_init();
+       ao_ms5607_init();
+       ao_log_init();
+       ao_report_init();
+       ao_igniter_init();
+       ao_config_init();
+
+       ao_start_scheduler();
+}
diff --git a/src/easymini-v3.0/ao_pins.h b/src/easymini-v3.0/ao_pins.h
new file mode 100644 (file)
index 0000000..6dbd7af
--- /dev/null
@@ -0,0 +1,161 @@
+/*
+ * Copyright © 2013 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#define HAS_BEEP               1
+#define HAS_BATTERY_REPORT     1
+
+#define AO_STACK_SIZE          352
+#define SLEEP_HASH_SIZE                3
+#define AO_NUM_TASKS           6
+
+#define IS_FLASH_LOADER        0
+
+/* Crystal on the board */
+#define AO_LPC_CLKIN   12000000
+
+/* Main clock frequency. 48MHz for USB so we don't use the USB PLL */
+#define AO_LPC_CLKOUT  48000000
+
+/* System clock frequency */
+#define AO_LPC_SYSCLK  24000000
+
+#define HAS_USB                1
+
+#define HAS_USB_CONNECT        0
+#define HAS_USB_VBUS   0
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT     1
+#define AO_USB_PULLUP_PIN      23
+
+#define PACKET_HAS_SLAVE       0
+
+#define AO_LOG_FORMAT          AO_LOG_FORMAT_EASYMINI1
+
+/* Beeper */
+#define AO_LPC_BEEP_TIMER      0
+#define AO_LPC_BEEP_CHANNEL    3
+#define AO_LPC_BEEP_PORT       1
+#define AO_LPC_BEEP_PIN                27
+
+/* USART */
+
+#define HAS_SERIAL             0
+#define USE_SERIAL_0_STDIN     1
+#define SERIAL_0_18_19         1
+#define SERIAL_0_14_15         0
+#define SERIAL_0_17_18         0
+#define SERIAL_0_26_27         0
+
+/* SPI */
+
+#define HAS_SPI_0              1
+#define SPI_SCK0_P0_6          1
+#define HAS_SPI_1              1
+#define SPI_SCK1_P1_20         1
+#define SPI_MISO1_P0_22                1
+#define SPI_MOSI1_P1_22                1
+
+/* M25 */
+
+#define M25_MAX_CHIPS          1
+#define AO_M25_SPI_CS_PORT     0
+#define AO_M25_SPI_CS_MASK     (1 << 23)
+#define AO_M25_SPI_BUS         1
+
+/* MS5607 */
+
+#define HAS_MS5607             1
+#define HAS_MS5611             0
+#define AO_MS5607_PRIVATE_PINS 0
+#define AO_MS5607_CS_PORT      1
+#define AO_MS5607_CS_PIN       5
+#define AO_MS5607_CS_MASK      (1 << AO_MS5607_CS_PIN)
+#define AO_MS5607_MISO_PORT    0
+#define AO_MS5607_MISO_PIN     8
+#define AO_MS5607_MISO_MASK    (1 << AO_MS5607_MISO_PIN)
+#define AO_MS5607_SPI_INDEX    0
+
+#define HAS_ACCEL              0
+#define HAS_GPS                        0
+#define HAS_RADIO              0
+#define HAS_FLIGHT             1
+#define HAS_EEPROM             1
+#define HAS_TELEMETRY          0
+#define HAS_APRS               0
+#define HAS_LOG                        1
+#define USE_INTERNAL_FLASH     0
+#define HAS_IGNITE             1
+#define HAS_IGNITE_REPORT      1
+#define SLEEP_HASH_SIZE                3
+
+#define AO_DATA_RING           16
+
+/*
+ * ADC
+ */
+
+#define HAS_ADC                        1
+
+#define AO_NUM_ADC             3
+
+#define AO_ADC_0               1
+#define AO_ADC_2               1
+#define AO_ADC_5               1
+
+struct ao_adc {
+       int16_t         sense_a;
+       int16_t         sense_m;
+       int16_t         v_batt;
+};
+
+/*
+ * Igniter
+ */
+
+#define AO_IGNITER_CLOSED      400
+#define AO_IGNITER_OPEN                60
+
+#define AO_IGNITER_DROGUE_PORT 1
+#define AO_IGNITER_DROGUE_PIN  25
+
+#define AO_IGNITER_MAIN_PORT   0
+#define AO_IGNITER_MAIN_PIN    2
+
+#define AO_SENSE_DROGUE(p)     ((p)->adc.sense_a)
+#define AO_SENSE_MAIN(p)       ((p)->adc.sense_m)
+
+#define AO_ADC_DUMP(p) \
+       printf("tick: %5lu apogee: %5d main: %5d batt: %5d\n", \
+              (p)->tick, (p)->adc.sense_a, (p)->adc.sense_m, (p)->adc.v_batt)
+
+/*
+ * Voltage divider on ADC battery sampler
+ */
+#define AO_BATTERY_DIV_PLUS    100     /* 100k */
+#define AO_BATTERY_DIV_MINUS   27      /* 27k */
+
+/*
+ * Voltage divider on ADC igniter samplers
+ */
+#define AO_IGNITE_DIV_PLUS     100     /* 100k */
+#define AO_IGNITE_DIV_MINUS    27      /* 27k */
+
+/*
+ * ADC reference in decivolts
+ */
+#define AO_ADC_REFERENCE_DV    33
diff --git a/src/easymini-v3.0/flash-loader/Makefile b/src/easymini-v3.0/flash-loader/Makefile
new file mode 100644 (file)
index 0000000..96d920e
--- /dev/null
@@ -0,0 +1,8 @@
+#
+# AltOS flash loader build
+#
+#
+
+TOPDIR=../..
+HARDWARE=easymini-v3.0
+include $(TOPDIR)/lpc/Makefile-flash.defs
diff --git a/src/easymini-v3.0/flash-loader/ao_pins.h b/src/easymini-v3.0/flash-loader/ao_pins.h
new file mode 100644 (file)
index 0000000..cf827c2
--- /dev/null
@@ -0,0 +1,34 @@
+/*
+ * Copyright © 2013 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#include <ao_flash_lpc_pins.h>
+
+#define AO_BOOT_PIN            1
+#define AO_BOOT_APPLICATION_GPIO       1
+#define AO_BOOT_APPLICATION_PIN                13
+#define AO_BOOT_APPLICATION_VALUE      1
+#define AO_BOOT_APPLICATION_MODE       AO_EXTI_MODE_PULL_UP
+
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT     1
+#define AO_USB_PULLUP_PIN      23
+
+#endif /* _AO_PINS_H_ */