++<<<<<<< HEAD
+commit 20d4d410e0fc04fe192e309811eed6c0194fa5a8
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Mar 30 23:11:40 2010 -0600
+
+ initial harness for documentation
+
+commit 9801ff7de21027935f52ccabaa3ff157e22d21ce
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Mar 15 12:04:18 2010 -0600
+
+ move gbp.conf into debian/
+
++=======
++>>>>>>> df7bda1f32b0049c3878c325ea0b55999f3980e3
commit eda5e1166a97766aa22561beaa1086ba4e19ee16
Author: Bdale Garbee <bdale@gag.com>
Date: Thu Mar 4 17:33:39 2010 -0700
#!/bin/sh
+if [ -x ../ao-tools/ao-load/ao-load ]; then
+ AOLOAD=../ao-tools/ao-load/ao-load
+elif [ -x /usr/bin/ao-load ]; then
+ AOLOAD=/usr/bin/ao-load
+else
+ echo "Can't find ao-load! Aborting."
+ exit 1
+fi
+
+if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then
+ RAWLOAD=../ao-tools/ao-rawload/ao-rawload
+elif [ -x /usr/bin/ao-rawload ]; then
+ RAWLOAD=/usr/bin/ao-rawload
+else
+ echo "Can't find ao-rawload! Aborting."
+ exit 1
+fi
+
echo "TeleDongle v0.2 Turn-On and Calibration Program"
echo "Copyright 2010 by Bdale Garbee. Released under GPL v2"
echo
echo -n "TeleDongle serial number: "
read SERIAL
-../ao-tools/ao-rawload/ao-rawload -r ao_led_blink.ihx
+echo $RAWLOAD
+
+$RAWLOAD -r ao_led_blink.ihx
echo "LEDs should be blinking"
sleep 5
-../ao-tools/ao-rawload/ao-rawload -r ao_radio_xmit.ihx
+$RAWLOAD -r ao_radio_xmit.ihx
echo -n "Generating RF carrier. Please enter measured frequency: "
read FREQ
- CAL_VALUE=`nickle -e "ceil(434.55 / $FREQ * 1186611)"`
+ CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
echo "Programming flash with cal value " $CAL_VALUE
-ao-load --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2.ihx $SERIAL
+$AOLOAD --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2.ihx $SERIAL
echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
echo "Unplug and replug USB, cu to the board, confirm freq and record power"