--- /dev/null
+/*
+ * Copyright © 2015 Bdale Garbee <bdale@gag.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#define HAS_BEEP 0
+
+#define AO_STACK_SIZE 384
+
+#define IS_FLASH_LOADER 0
+
+/* Crystal on the board */
+#define AO_LPC_CLKIN 12000000
+
+/* Main clock frequency. 48MHz for USB so we don't use the USB PLL */
+#define AO_LPC_CLKOUT 48000000
+
+/* System clock frequency */
+#define AO_LPC_SYSCLK 24000000
+
+#define HAS_USB 1
+
+#define HAS_USB_CONNECT 0
+#define HAS_USB_VBUS 0
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT 0
+#define AO_USB_PULLUP_PIN 6
+
+/* USART */
+
+#define HAS_SERIAL 1
+#define USE_SERIAL_0_STDIN 0
+#define SERIAL_0_18_19 1
+#define SERIAL_0_14_15 0
+#define SERIAL_0_17_18 0
+#define SERIAL_0_26_27 0
+
+/* SPI */
+
+#define HAS_SPI_0 0
+#define SPI_SCK0_P0_6 0
+#define HAS_SPI_1 0
+#define SPI_SCK1_P1_15 0
+#define SPI_MISO1_P0_22 0
+#define SPI_MOSI1_P0_21 0
+
+/* LED */
+
+#define LED_PORT 0
+#define LED_PIN_RED 23
+#define LED_PIN_GREEN 7
+#define AO_LED_RED (1 << LED_PIN_RED)
+#define AO_LED_GREEN (1 << LED_PIN_GREEN)
+
+#define LEDS_AVAILABLE (AO_LED_RED|AO_LED_GREEN)
+
+/* Kludge the SPI driver to not configure any
+ * pin for SCK or MOSI
+ */
+#define HAS_SCK1 0
+#define HAS_MOSI1 0
--- /dev/null
+#define AO_LPC_USARTCLK 12000000
+
+static const struct {
+ uint16_t dl;
+ uint8_t divaddval;
+ uint8_t mulval;
+} ao_usart_speeds[] = {
+ [AO_SERIAL_SPEED_4800] = { /* actual = 4800.00 */
+ .dl = 125,
+ .divaddval = 1,
+ .mulval = 4
+ },
+ [AO_SERIAL_SPEED_9600] = { /* actual = 9603.07 */
+ .dl = 71,
+ .divaddval = 1,
+ .mulval = 10
+ },
+ [AO_SERIAL_SPEED_19200] = { /* actual = 19181.59 */
+ .dl = 23,
+ .divaddval = 7,
+ .mulval = 10
+ },
+ [AO_SERIAL_SPEED_57600] = { /* actual = 57692.31 */
+ .dl = 7,
+ .divaddval = 6,
+ .mulval = 7
+ },
+ [AO_SERIAL_SPEED_115200] = { /* actual = 115384.6 */
+ .dl = 4,
+ .divaddval = 5,
+ .mulval = 8
+ },
+};
--- /dev/null
+/*
+ * Copyright © 2014 Bdale Garbee <bdale@gag.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <ao.h>
+
+uint8_t relay_output;
+
+// switch relay to selected output, turn correct LED on as a side effect
+static void
+ao_relay_control(uint8_t output)
+{
+ switch (output) {
+ case 1:
+ ao_led_on(AO_LED_RED);
+ ao_led_off(AO_LED_GREEN);
+ break;
+ default:
+ ao_led_off(AO_LED_RED);
+ ao_led_on(AO_LED_GREEN);
+ }
+}
+
+static void
+ao_relay_select(void) __reentrant
+{
+ uint8_t output;
+
+ ao_cmd_decimal();
+ if (ao_cmd_status != ao_cmd_success)
+ return;
+ output = ao_cmd_lex_i;
+
+ printf ("Relay control not implemented yet, %u selected\n", output);
+ ao_relay_control(output);
+}
+
+static __code struct ao_cmds ao_relay_cmds[] = {
+ { ao_relay_select, "R <output>\0Select relay output" },
+ { 0, NULL }
+};
+
+void
+main(void)
+{
+ ao_clock_init();
+ ao_task_init();
+ ao_timer_init();
+
+ ao_usb_init();
+
+ ao_serial_init();
+
+ ao_led_init(LEDS_AVAILABLE);
+
+ // initialize to default output
+ relay_output = 0;
+ ao_relay_control(relay_output);
+
+ ao_cmd_init();
+
+ ao_cmd_register(ao_relay_cmds);
+
+ ao_start_scheduler();
+}
--- /dev/null
+/*
+ * Copyright © 2013 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#include <ao_flash_lpc_pins.h>
+
+#define AO_BOOT_PIN 1
+#define AO_BOOT_APPLICATION_GPIO 0
+#define AO_BOOT_APPLICATION_PIN 19
+#define AO_BOOT_APPLICATION_VALUE 1
+#define AO_BOOT_APPLICATION_MODE AO_EXTI_MODE_PULL_UP
+
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT 0
+#define AO_USB_PULLUP_PIN 6
+
+#endif /* _AO_PINS_H_ */