doc: Add telemetry enable and APRS interval config docs

Also starts working on the pyro channel config window docs

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 0af2a5e8bec8a7dad80fc005ea6c32a071473834..ee809f081f971d15bac1af75b77b046087f45979 100644 (file)
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -1729,7 +1729,7 @@ NAR #88757, TRA #12200
     <section>
       <title>Configure Altimeter</title>
       <para>
     <section>
       <title>Configure Altimeter</title>
       <para>

-        Select this button and then select either a TeleMetrum or
+        Select this button and then select either an altimeter or

         TeleDongle Device from the list provided. Selecting a TeleDongle
         device will use the radio link to configure a remote altimeter. 
       </para>
         TeleDongle Device from the list provided. Selecting a TeleDongle
         device will use the radio link to configure a remote altimeter. 
       </para>


@@ -1800,15 +1800,15 @@ NAR #88757, TRA #12200
       <section>
         <title>Radio Frequency</title>
         <para>
       <section>
         <title>Radio Frequency</title>
         <para>

-          This configures which of the configured frequencies to use for both
+          This configures which of the frequencies to use for both

           telemetry and packet command mode. Note that if you set this
           telemetry and packet command mode. Note that if you set this

-          value via packet command mode, you will have to reconfigure
-          the TeleDongle frequency before you will be able to use packet
-          command mode again.
+          value via packet command mode, the TeleDongle frequency will
+          also be automatically reconfigured to match so that
+          communication will continue afterwards.

         </para>
       </section>
       <section>
         </para>
       </section>
       <section>

-        <title>Radio Calibration</title>
+        <title>RF Calibration</title>

         <para>
           The radios in every Altus Metrum device are calibrated at the
           factory to ensure that they transmit and receive on the
         <para>
           The radios in every Altus Metrum device are calibrated at the
           factory to ensure that they transmit and receive on the


@@ -1819,6 +1819,25 @@ NAR #88757, TRA #12200
          you must reprogram the unit completely.
         </para>
       </section>
          you must reprogram the unit completely.
         </para>
       </section>

+      <section>
+       <title>Telemetry/RDF/APRS Enable</title>
+       <para>
+         Enables the radio for transmission during flight. When
+         disabled, the radio will not transmit anything during flight
+         at all.
+       </para>
+      </section>
+      <section>
+       <title>APRS Interval</title>
+       <para>
+         How often to transmit GPS information via APRS. This option
+         is available on TeleMetrum v2 and TeleMega
+         boards. TeleMetrum v1 boards cannot transmit APRS
+         packets. Note that a single APRS packet takes nearly a full
+         second to transmit, so enabling this option will prevent
+         sending any other telemetry during that time.
+       </para>
+      </section>

       <section>
         <title>Callsign</title>
         <para>
       <section>
         <title>Callsign</title>
         <para>


@@ -1896,6 +1915,23 @@ NAR #88757, TRA #12200
          </listitem>
        </itemizedlist>
       </section>
          </listitem>
        </itemizedlist>
       </section>

+      <section>
+       <title>Configure Pyro Channels</title>
+       <para>
+         This opens a separate window to configure the additional
+         pyro channels available on TeleMega. One column is presented
+         for each channel. Each row represents a single parameter, if
+         enabled the parameter must meet the specified test for the
+         pyro channel to be fired.
+       </para>
+       <itemizedlist>
+         <listitem>
+           <para>
+             
+           </para>
+         </listitem>
+       </itemizedlist>
+      </section>

     </section>
     <section>
       <title>Configure AltosUI</title>
     </section>
     <section>
       <title>Configure AltosUI</title>