summary |
shortlog |
log |
commit | commitdiff |
tree
raw |
patch |
inline | side by side (from parent 1:
6a082d9)
Signed-off-by: Keith Packard <keithp@keithp.com>
-include ../stm/Makefile.defs
+include ../lpc/Makefile.defs
ao_product.h \
ao_task.h \
ao_whiten.h \
ao_product.h \
ao_task.h \
ao_whiten.h \
ao_cc1200.h \
ao_cc1200_CC1200.h \
Makefile
ao_cc1200.h \
ao_cc1200_CC1200.h \
Makefile
-#PROFILE=ao_profile.c
-#PROFILE_DEF=-DAO_PROFILE=1
-
-#SAMPLE_PROFILE=ao_sample_profile.c \
-# ao_sample_profile_timer.c
-#SAMPLE_PROFILE_DEF=-DHAS_SAMPLE_PROFILE=1
-
-#STACK_GUARD=ao_mpu_stm.c
-#STACK_GUARD_DEF=-DHAS_STACK_GUARD=1
-
ALTOS_SRC = \
ao_boot_chain.c \
ao_interrupt.c \
ALTOS_SRC = \
ao_boot_chain.c \
ao_interrupt.c \
ao_cmd.c \
ao_config.c \
ao_task.c \
ao_cmd.c \
ao_config.c \
ao_task.c \
ao_stdio.c \
ao_panic.c \
ao_stdio.c \
ao_panic.c \
- ao_dma_stm.c \
- ao_spi_stm.c \
- ao_usb_stm.c \
- ao_exti_stm.c \
+ ao_spi_lpc.c \
+ ao_usb_lpc.c \
+ ao_exti_lpc.c \
ao_packet_master.c \
ao_packet.c
ao_packet_master.c \
ao_packet.c
PRODUCT_DEF=-DTELEDONGLE
IDPRODUCT=0x000c
PRODUCT_DEF=-DTELEDONGLE
IDPRODUCT=0x000c
-CFLAGS = $(PRODUCT_DEF) $(STM_CFLAGS) $(PROFILE_DEF) $(SAMPLE_PROFILE_DEF) $(STACK_GUARD_DEF) -Os -g
+CFLAGS = $(PRODUCT_DEF) $(LPC_CFLAGS) -Os -g
PROGNAME=teledongle-v1.9
PROG=$(PROGNAME)-$(VERSION).elf
PROGNAME=teledongle-v1.9
PROG=$(PROGNAME)-$(VERSION).elf
ao_product.h: ao-make-product.5c ../Version
$(call quiet,NICKLE,$<) $< -m altusmetrum.org -i $(IDPRODUCT) -p $(PRODUCT) -v $(VERSION) > $@
ao_product.h: ao-make-product.5c ../Version
$(call quiet,NICKLE,$<) $< -m altusmetrum.org -i $(IDPRODUCT) -p $(PRODUCT) -v $(VERSION) > $@
+load: $(PROG)
+ lpc-load $(PROG)
+
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
-#define HAS_TASK_QUEUE 1
-
-/* 8MHz High speed external crystal */
-#define AO_HSE 8000000
-
-/* PLLVCO = 96MHz (so that USB will work) */
-#define AO_PLLMUL 12
-#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
-
-/* SYSCLK = 32MHz (no need to go faster than CPU) */
-#define AO_PLLDIV 3
-#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
-
-/* HCLK = 32MHz (CPU clock) */
-#define AO_AHB_PRESCALER 1
-#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
+#define AO_STACK_SIZE 324
-/* Run APB1 at 16MHz (HCLK/2) */
-#define AO_APB1_PRESCALER 2
-#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
+#define HAS_TASK_QUEUE 1
-/* Run APB2 at 16MHz (HCLK/2) */
-#define AO_APB2_PRESCALER 2
-#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
+#define IS_FLASH_LOADER 0
-#define HAS_SERIAL_1 0
-#define USE_SERIAL_1_STDIN 0
-#define SERIAL_1_PB6_PB7 0
-#define SERIAL_1_PA9_PA10 0
+/* Crystal on the board */
+#define AO_LPC_CLKIN 12000000
-#define HAS_SERIAL_2 0
-#define USE_SERIAL_2_STDIN 0
-#define SERIAL_2_PA2_PA3 0
-#define SERIAL_2_PD5_PD6 0
+/* Main clock frequency. 48MHz for USB so we don't use the USB PLL */
+#define AO_LPC_CLKOUT 48000000
-#define HAS_SERIAL_3 0
-#define USE_SERIAL_3_STDIN 0
-#define SERIAL_3_PB10_PB11 0
-#define SERIAL_3_PC10_PC11 0
-#define SERIAL_3_PD8_PD9 0
+/* System clock frequency */
+#define AO_LPC_SYSCLK 24000000
-#define HAS_EEPROM 1
-#define USE_INTERNAL_FLASH 1
+#define HAS_EEPROM 0
+#define USE_INTERNAL_FLASH 0
#define USE_STORAGE_CONFIG 0
#define USE_STORAGE_CONFIG 0
-#define USE_EEPROM_CONFIG 1
+#define USE_EEPROM_CONFIG 0
+
+#define HAS_USB_CONNECT 0
+#define HAS_USB_VBUS 0
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT 0
+#define AO_USB_PULLUP_PIN 20
+
#define HAS_BEEP 0
#define HAS_RADIO 1
#define HAS_TELEMETRY 0
#define HAS_BEEP 0
#define HAS_RADIO 1
#define HAS_TELEMETRY 0
-#define HAS_RSSI 1
-
-#define HAS_SPI_1 0
-#define SPI_1_PA5_PA6_PA7 0 /* Barometer */
-#define SPI_1_PB3_PB4_PB5 0
-#define SPI_1_PE13_PE14_PE15 0 /* Accelerometer */
-
-#define HAS_SPI_2 1
-#define SPI_2_PB13_PB14_PB15 1 /* Radio */
-#define SPI_2_PD1_PD3_PD4 0
-#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
-#define SPI_2_PORT (&stm_gpiob)
-#define SPI_2_SCK_PIN 13
-#define SPI_2_MISO_PIN 14
-#define SPI_2_MOSI_PIN 15
+#define HAS_SPI_0 1
+#define SPI_SCK0_P0_6 1
#define PACKET_HAS_SLAVE 0
#define PACKET_HAS_MASTER 1
#define LOW_LEVEL_DEBUG 0
#define PACKET_HAS_SLAVE 0
#define PACKET_HAS_MASTER 1
#define LOW_LEVEL_DEBUG 0
-#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOCEN
-#define LED_PORT_0 (&stm_gpioc)
-#define LED_PORT_0_MASK (0xffff)
-#define LED_PORT_0_SHIFT 0
-#define LED_PIN_RED 8
-#define LED_PIN_GREEN 9
+#define LED_PORT 0
+#define LED_PIN_RED 14
+#define LED_PIN_GREEN 7
#define AO_LED_RED (1 << LED_PIN_RED)
#define AO_LED_GREEN (1 << LED_PIN_GREEN)
#define AO_LED_RED (1 << LED_PIN_RED)
#define AO_LED_GREEN (1 << LED_PIN_GREEN)
#define LEGACY_MONITOR 0
#define HAS_MONITOR_PUT 1
#define AO_MONITOR_LED AO_LED_GREEN
#define LEGACY_MONITOR 0
#define HAS_MONITOR_PUT 1
#define AO_MONITOR_LED AO_LED_GREEN
+#define AO_MONITOR_BAD AO_LED_RED
#define AO_RADIO_CAL_DEFAULT 5695733
#define AO_FEC_DEBUG 0
#define AO_RADIO_CAL_DEFAULT 5695733
#define AO_FEC_DEBUG 0
-#define AO_CC1200_SPI_CS_PORT (&stm_gpioc)
-#define AO_CC1200_SPI_CS_PIN 5
-#define AO_CC1200_SPI_BUS AO_SPI_2_PB13_PB14_PB15
-#define AO_CC1200_SPI stm_spi2
+#define AO_CC1200_SPI_CS_PORT 0
+#define AO_CC1200_SPI_CS_PIN 3
+#define AO_CC1200_SPI_BUS 0
+#define AO_CC1200_SPI 0
-#define AO_CC1200_INT_PORT (&stm_gpioe)
-#define AO_CC1200_INT_PIN 1
+#define AO_CC1200_INT_PORT 0
+#define AO_CC1200_INT_PIN 2
#define AO_CC1200_INT_GPIO 2
#define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2
#define AO_CC1200_INT_GPIO 2
#define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2
ao_timer_init();
ao_spi_init();
ao_timer_init();
ao_spi_init();
ao_exti_init();
ao_cmd_init();
ao_exti_init();
ao_cmd_init();
ao_usb_init();
ao_radio_init();
ao_monitor_init();
ao_usb_init();
ao_radio_init();
ao_monitor_init();
- ao_rssi_init(AO_LED_RED);
ao_packet_master_init();
ao_send_packet_init();
ao_config_init();
ao_packet_master_init();
ao_send_packet_init();
ao_config_init();
+ ao_led_off(AO_LED_RED);
ao_start_scheduler();
return 0;
}
ao_start_scheduler();
return 0;
}
TOPDIR=../..
HARDWARE=teledongle-v1.9
TOPDIR=../..
HARDWARE=teledongle-v1.9
-include $(TOPDIR)/stm/Makefile-flash.defs
+include $(TOPDIR)/lpc/Makefile-flash.defs
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
-/* External crystal at 8MHz */
-#define AO_HSE 8000000
+#include <ao_flash_lpc_pins.h>
-#include <ao_flash_stm_pins.h>
+/* Debug port TXD (pin 6) */
-/* Companion port cs_companion0 PD0 */
-
-#define AO_BOOT_PIN 1
-#define AO_BOOT_APPLICATION_GPIO stm_gpiod
-#define AO_BOOT_APPLICATION_PIN 0
+#define AO_BOOT_PIN 1
+#define AO_BOOT_APPLICATION_GPIO 0
+#define AO_BOOT_APPLICATION_PIN 19
#define AO_BOOT_APPLICATION_VALUE 1
#define AO_BOOT_APPLICATION_MODE AO_EXTI_MODE_PULL_UP
#define AO_BOOT_APPLICATION_VALUE 1
#define AO_BOOT_APPLICATION_MODE AO_EXTI_MODE_PULL_UP
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT 0
+#define AO_USB_PULLUP_PIN 20
+