+ This activates the igniter circuits in TeleMetrum to help test
+ recovery systems deployment. Because this command can operate
+ over the Packet Command Link, you can prepare the rocket as
+ for flight and then test the recovery system without needing
+ to snake wires inside the airframe.
+ </para>
+ <para>
+ Selecting the 'Fire Igniter' button brings up the usual device
+ selection dialog. Pick the desired TeleDongle or TeleMetrum
+ device. This brings up another window which shows the current
+ continutity test status for both apogee and main charges.
+ </para>
+ <para>
+ Next, select the desired igniter to fire. This will enable the
+ 'Arm' button.
+ </para>
+ <para>
+ Select the 'Arm' button. This enables the 'Fire' button. The
+ word 'Arm' is replaced by a countdown timer indicating that
+ you have 10 seconds to press the 'Fire' button or the system
+ will deactivate, at which point you start over again at
+ selecting the desired igniter.