--- /dev/null
+/*
+ * Copyright © 2010 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#define HAS_RADIO 1
+#define HAS_RADIO_RATE 1
+#define HAS_TELEMETRY 0
+#define HAS_FLIGHT 0
+#define HAS_USB 1
+#define HAS_BEEP 0
+#define HAS_GPS 0
+#define HAS_SERIAL_1 0
+#define HAS_ADC 1
+#define HAS_DBG 0
+#define HAS_EEPROM 1
+#define HAS_LOG 0
+#define HAS_PAD 1
+#define USE_INTERNAL_FLASH 1
+#define IGNITE_ON_P0 0
+#define PACKET_HAS_MASTER 0
+#define PACKET_HAS_SLAVE 0
+#define AO_DATA_RING 32
+#define USE_EEPROM_CONFIG 1
+#define USE_STORAGE_CONFIG 0
+#define HAS_AES 1
+
+/* 8MHz High speed external crystal */
+#define AO_HSE 8000000
+
+/* PLLVCO = 96MHz (so that USB will work) */
+#define AO_PLLMUL 12
+#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
+
+#define AO_CC1200_FOSC 40000000
+
+/* SYSCLK = 32MHz (no need to go faster than CPU) */
+#define AO_PLLDIV 3
+#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
+
+/* HCLK = 32MHz (CPU clock) */
+#define AO_AHB_PRESCALER 1
+#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
+
+/* Run APB1 at 16MHz (HCLK/2) */
+#define AO_APB1_PRESCALER 2
+#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
+
+/* Run APB2 at 16MHz (HCLK/2) */
+#define AO_APB2_PRESCALER 2
+#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
+
+#define HAS_SPI_1 1
+#define SPI_1_PA5_PA6_PA7 0
+#define SPI_1_PB3_PB4_PB5 0
+#define SPI_1_PE13_PE14_PE15 1
+#define SPI_1_GPIO (&stm_gpioe)
+#define SPI_1_SCK 13
+#define SPI_1_MISO 14
+#define SPI_1_MOSI 15
+#define SPI_1_OSPEEDR STM_OSPEEDR_10MHz
+
+#define HAS_SPI_2 0
+#define SPI_2_PB13_PB14_PB15 0
+#define SPI_2_PD1_PD3_PD4 0
+
+#define HAS_I2C_1 0
+
+#define HAS_I2C_2 0
+
+#define PACKET_HAS_SLAVE 0
+#define PACKET_HAS_MASTER 0
+
+#define FAST_TIMER_FREQ 10000 /* .1ms for debouncing */
+
+/*
+ * Radio is a cc1200 connected via SPI
+ */
+
+#define AO_RADIO_CAL_DEFAULT 5695733
+
+#define AO_CC1200_SPI_CS_PORT (&stm_gpioe)
+#define AO_CC1200_SPI_CS_PIN 11
+#define AO_CC1200_SPI_BUS AO_SPI_1_PE13_PE14_PE15
+#define AO_CC1200_SPI stm_spi1
+#define AO_CC1200_SPI_SPEED AO_SPI_SPEED_FAST
+
+#define AO_CC1200_INT_PORT (&stm_gpioe)
+#define AO_CC1200_INT_PIN (12)
+
+#define AO_CC1200_INT_GPIO 2
+#define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2
+
+#define LED_PER_LED 1
+#define LED_TYPE uint16_t
+
+/* Continuity leds 1-8 */
+#define LED_0_PORT (&stm_gpiob)
+#define LED_0_PIN 13
+#define LED_1_PORT (&stm_gpiob)
+#define LED_1_PIN 12
+#define LED_2_PORT (&stm_gpiob)
+#define LED_2_PIN 11
+#define LED_3_PORT (&stm_gpiob)
+#define LED_3_PIN 10
+#define LED_4_PORT (&stm_gpioc)
+#define LED_4_PIN 9
+#define LED_5_PORT (&stm_gpioa)
+#define LED_5_PIN 8
+#define LED_6_PORT (&stm_gpioa)
+#define LED_6_PIN 9
+#define LED_7_PORT (&stm_gpioa)
+#define LED_7_PIN 10
+
+#define LED_PIN_CONTINUITY_0 0
+#define LED_PIN_CONTINUITY_1 1
+#define LED_PIN_CONTINUITY_2 2
+#define LED_PIN_CONTINUITY_3 3
+#define LED_PIN_CONTINUITY_4 4
+#define LED_PIN_CONTINUITY_5 5
+#define LED_PIN_CONTINUITY_6 6
+#define LED_PIN_CONTINUITY_7 7
+
+/* ARM */
+#define LED_8_PORT (&stm_gpioe)
+#define LED_8_PIN 3
+
+#define LED_PIN_ARMED 8
+
+/* RF good/marginal/poor */
+#define LED_9_PORT (&stm_gpioe)
+#define LED_9_PIN 4
+#define LED_10_PORT (&stm_gpioe)
+#define LED_10_PIN 5
+#define LED_11_PORT (&stm_gpioe)
+#define LED_11_PIN 6
+
+#define LED_PIN_GREEN 9
+#define LED_PIN_AMBER 10
+#define LED_PIN_RED 11
+
+#define AO_LED_CONTINUITY(c) (1 << (c))
+#define AO_LED_CONTINUITY_MASK (0xff)
+
+#define AO_LED_ARMED (1 << LED_PIN_ARMED)
+#define AO_LED_GREEN (1 << LED_PIN_GREEN)
+#define AO_LED_AMBER (1 << LED_PIN_AMBER)
+#define AO_LED_RED (1 << LED_PIN_RED)
+
+#define LEDS_AVAILABLE (0xfff)
+
+/* Alarm A */
+#define AO_SIREN
+#define AO_SIREN_PORT (&stm_gpiod)
+#define AO_SIREN_PIN 10
+
+/* Alarm B */
+#define AO_STROBE
+#define AO_STROBE_PORT (&stm_gpiod)
+#define AO_STROBE_PIN 11
+
+/* Pad selector is on PD0-7 */
+
+#define HAS_FIXED_PAD_BOX 1
+#define AO_PAD_SELECTOR_PORT (&stm_gpiod)
+#define AO_PAD_SELECTOR_PINS (0xff)
+
+#define SPI_CONST 0x00
+
+#define AO_PAD_NUM 8
+#define AO_PAD_PORT_0 (&stm_gpiod)
+#define AO_PAD_PORT_1 (&stm_gpiob)
+
+#define AO_PAD_PIN_0 9
+#define AO_PAD_0_PORT (&stm_gpiod)
+#define AO_PAD_ADC_0 3
+
+#define AO_PAD_PIN_1 8
+#define AO_PAD_1_PORT (&stm_gpiod)
+#define AO_PAD_ADC_1 2
+
+#define AO_PAD_PIN_2 15
+#define AO_PAD_2_PORT (&stm_gpiob)
+#define AO_PAD_ADC_2 1
+
+#define AO_PAD_PIN_3 14
+#define AO_PAD_3_PORT (&stm_gpiob)
+#define AO_PAD_ADC_3 0
+
+#define AO_PAD_PIN_4 12
+#define AO_PAD_4_PORT (&stm_gpiod)
+#define AO_PAD_ADC_4 7
+
+#define AO_PAD_PIN_5 13
+#define AO_PAD_5_PORT (&stm_gpiod)
+#define AO_PAD_ADC_5 6
+
+#define AO_PAD_PIN_6 14
+#define AO_PAD_6_PORT (&stm_gpiod)
+#define AO_PAD_ADC_6 5
+
+#define AO_PAD_PIN_7 15
+#define AO_PAD_7_PORT (&stm_gpiod)
+#define AO_PAD_ADC_7 4
+
+#define AO_PAD_ALL_CHANNELS (0xff)
+
+/* test these values with real igniters */
+#define AO_PAD_RELAY_CLOSED 3524
+#define AO_PAD_NO_IGNITER 16904
+#define AO_PAD_GOOD_IGNITER 22514
+
+#define AO_PAD_ADC_PYRO 8
+#define AO_PAD_ADC_BATT 15
+
+#define AO_ADC_FIRST_PIN 0
+
+#define AO_NUM_ADC 10
+
+#define AO_ADC_SQ1 AO_PAD_ADC_0
+#define AO_ADC_SQ2 AO_PAD_ADC_1
+#define AO_ADC_SQ3 AO_PAD_ADC_2
+#define AO_ADC_SQ4 AO_PAD_ADC_3
+#define AO_ADC_SQ5 AO_PAD_ADC_4
+#define AO_ADC_SQ6 AO_PAD_ADC_5
+#define AO_ADC_SQ7 AO_PAD_ADC_6
+#define AO_ADC_SQ8 AO_PAD_ADC_7
+#define AO_ADC_SQ9 AO_PAD_ADC_PYRO
+#define AO_ADC_SQ10 AO_PAD_ADC_BATT
+
+#define AO_PYRO_R_PYRO_SENSE 200
+#define AO_PYRO_R_SENSE_GND 22
+
+#define AO_FIRE_R_POWER_FET 0
+#define AO_FIRE_R_FET_SENSE 200
+#define AO_FIRE_R_SENSE_GND 22
+
+#define HAS_ADC_TEMP 0
+
+struct ao_adc {
+ int16_t sense[AO_PAD_NUM];
+ int16_t pyro;
+ int16_t batt;
+};
+
+#define AO_ADC_DUMP(p) \
+ printf ("tick: %5u " \
+ "0: %5d 1: %5d 2: %5d 3: %5d " \
+ "4: %5d 5: %5d 6: %5d 7: %5d " \
+ "pyro: %5d batt: %5d\n", \
+ (p)->tick, \
+ (p)->adc.sense[0], \
+ (p)->adc.sense[1], \
+ (p)->adc.sense[2], \
+ (p)->adc.sense[3], \
+ (p)->adc.sense[4], \
+ (p)->adc.sense[5], \
+ (p)->adc.sense[6], \
+ (p)->adc.sense[7], \
+ (p)->adc.pyro, \
+ (p)->adc.batt)
+
+#define AO_ADC_PINS ((1 << AO_PAD_ADC_0) | \
+ (1 << AO_PAD_ADC_1) | \
+ (1 << AO_PAD_ADC_2) | \
+ (1 << AO_PAD_ADC_3) | \
+ (1 << AO_PAD_ADC_4) | \
+ (1 << AO_PAD_ADC_5) | \
+ (1 << AO_PAD_ADC_6) | \
+ (1 << AO_PAD_ADC_7) | \
+ (1 << AO_PAD_ADC_PYRO) | \
+ (1 << AO_PAD_ADC_BATT))
+
+#endif /* _AO_PINS_H_ */
projects / fw / altos / commitdiff