+ <title>
+ Updating TeleMega, TeleMetrum v2 or EasyMini Firmware
+ </title>
+ <orderedlist inheritnum='inherit' numeration='arabic'>
+ <listitem>
+ <para>
+ Attach a battery and power switch to the target
+ device. Power up the device.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Using a Micro USB cable, connect the target device to your
+ computer's USB socket.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Run AltosUI, and select 'Flash Image' from the File menu.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Select the image you want to flash to the device, which
+ should have a name in the form
+ <product>-v<product-version>-<software-version>.ihx, such
+ as TeleMega-v1.0-1.3.0.ihx.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Make sure the configuration parameters are reasonable
+ looking. If the serial number and/or RF configuration
+ values aren't right, you'll need to change them.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Hit the 'OK' button and the software should proceed to flash
+ the device with new firmware, showing a progress bar.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Verify that the device is working by using the 'Configure
+ Altimeter' item to check over the configuration.
+ </para>
+ </listitem>
+ </orderedlist>
+ </section>
+ <section>
+ <title>Updating TeleMetrum v1.x Firmware</title>