aa8501c04807c73e3a08c4201e1f07e496fd4838
[fw/altos] / src / telefiretwo-v1.0 / ao_pins.h
1 /*
2  * Copyright © 2010 Keith Packard <keithp@keithp.com>
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation; either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
12  * General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License along
15  * with this program; if not, write to the Free Software Foundation, Inc.,
16  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
17  */
18
19 #ifndef _AO_PINS_H_
20 #define _AO_PINS_H_
21
22 #define HAS_RADIO               1
23 #define HAS_RADIO_RATE          1
24 #define HAS_TELEMETRY           0
25
26 #define HAS_FLIGHT              0
27 #define HAS_USB                 1
28 #define HAS_BEEP                1
29 #define BEEPER_CHANNEL          4
30 #define HAS_GPS                 0
31 #define HAS_SERIAL_1            0
32 #define HAS_ADC                 1
33 #define HAS_DBG                 0
34 #define HAS_EEPROM              1
35 #define HAS_LOG                 0
36 #define HAS_PAD                 1
37 #define USE_INTERNAL_FLASH      1
38 #define IGNITE_ON_P0            0
39 #define PACKET_HAS_MASTER       0
40 #define PACKET_HAS_SLAVE        0
41 #define AO_DATA_RING            32
42 #define HAS_FIXED_PAD_BOX       1
43
44 /* 8MHz High speed external crystal */
45 #define AO_HSE                  8000000
46
47 /* PLLVCO = 96MHz (so that USB will work) */
48 #define AO_PLLMUL               12
49 #define AO_RCC_CFGR_PLLMUL      (STM_RCC_CFGR_PLLMUL_12)
50
51 #define AO_CC1200_FOSC          40000000
52
53 /* SYSCLK = 32MHz (no need to go faster than CPU) */
54 #define AO_PLLDIV               3
55 #define AO_RCC_CFGR_PLLDIV      (STM_RCC_CFGR_PLLDIV_3)
56
57 /* HCLK = 32MHz (CPU clock) */
58 #define AO_AHB_PRESCALER        1
59 #define AO_RCC_CFGR_HPRE_DIV    STM_RCC_CFGR_HPRE_DIV_1
60
61 /* Run APB1 at 16MHz (HCLK/2) */
62 #define AO_APB1_PRESCALER       2
63 #define AO_RCC_CFGR_PPRE1_DIV   STM_RCC_CFGR_PPRE2_DIV_2
64
65 /* Run APB2 at 16MHz (HCLK/2) */
66 #define AO_APB2_PRESCALER       2
67 #define AO_RCC_CFGR_PPRE2_DIV   STM_RCC_CFGR_PPRE2_DIV_2
68
69 #define HAS_EEPROM              1
70 #define USE_INTERNAL_FLASH      1
71 #define USE_EEPROM_CONFIG       1
72 #define USE_STORAGE_CONFIG      0
73 #define HAS_USB                 1
74 #define HAS_RADIO               1
75 #define HAS_RADIO_RATE          1
76 #define HAS_TELEMETRY           0
77 #define HAS_AES                 1
78
79 #define HAS_SPI_1               0
80 #define SPI_1_PA5_PA6_PA7       0
81 #define SPI_1_PB3_PB4_PB5       0
82 #define SPI_1_PE13_PE14_PE15    0
83
84 #define HAS_SPI_2               1       /* CC1200 */
85 #define SPI_2_PB13_PB14_PB15    1
86 #define SPI_2_PD1_PD3_PD4       0
87 #define SPI_2_GPIO              (&stm_gpiob)
88 #define SPI_2_SCK               13
89 #define SPI_2_MISO              14
90 #define SPI_2_MOSI              15
91 #define SPI_2_OSPEEDR           STM_OSPEEDR_10MHz
92
93 #define HAS_I2C_1               0
94
95 #define HAS_I2C_2               0
96
97 #define PACKET_HAS_SLAVE        0
98 #define PACKET_HAS_MASTER       0
99
100 #define FAST_TIMER_FREQ         10000   /* .1ms for debouncing */
101
102 /*
103  * SPI Flash memory
104  */
105
106 #define M25_MAX_CHIPS           1
107 #define AO_M25_SPI_CS_PORT      (&stm_gpioa)
108 #define AO_M25_SPI_CS_MASK      (1 << 15)
109 #define AO_M25_SPI_BUS          AO_SPI_2_PB13_PB14_PB15
110
111 /*
112  * Radio is a cc1200 connected via SPI
113  */
114
115 #define AO_RADIO_CAL_DEFAULT    5695733
116
117 #define AO_FEC_DEBUG            0
118 #define AO_CC1200_SPI_CS_PORT   (&stm_gpioa)
119 #define AO_CC1200_SPI_CS_PIN    7
120 #define AO_CC1200_SPI_BUS       AO_SPI_2_PB13_PB14_PB15
121 #define AO_CC1200_SPI           stm_spi2
122 #define AO_CC1200_SPI_SPEED     AO_SPI_SPEED_FAST
123
124 #define AO_CC1200_INT_PORT              (&stm_gpiob)
125 #define AO_CC1200_INT_PIN               (11)
126
127 #define AO_CC1200_INT_GPIO      2
128 #define AO_CC1200_INT_GPIO_IOCFG        CC1200_IOCFG2
129
130 #define LED_PORT_0              (&stm_gpioa)
131 #define LED_PORT_1              (&stm_gpiob)
132
133 #define LED_PORT_0_ENABLE       STM_RCC_AHBENR_GPIOAEN
134 #define LED_PORT_1_ENABLE       STM_RCC_AHBENR_GPIOBEN
135
136 /* Port A, pins 4-6 */
137 #define LED_PORT_0_SHIFT        4
138 #define LED_PORT_0_MASK         0x7
139 #define LED_PIN_GREEN           0
140 #define LED_PIN_AMBER           1
141 #define LED_PIN_RED             2
142 #define AO_LED_RED              (1 << LED_PIN_RED)
143 #define AO_LED_AMBER            (1 << LED_PIN_AMBER)
144 #define AO_LED_GREEN            (1 << LED_PIN_GREEN)
145
146 /* Port B, pins 4-5 */
147 #define LED_PORT_1_SHIFT        0
148 #define LED_PORT_1_MASK         (0x3 << 4)
149 #define LED_PIN_CONT_0          4
150 #define LED_PIN_ARMED           5
151
152 #define AO_LED_ARMED            (1 << LED_PIN_ARMED)
153 #define AO_LED_CONTINUITY(c)    (1 << (4 - (c)))
154 #define AO_LED_CONTINUITY_MASK  (0x1 << 4)
155
156 #define LEDS_AVAILABLE          (LED_PORT_0_MASK|LED_PORT_1_MASK)
157
158 /* Alarm A */
159 #define AO_SIREN
160 #define AO_SIREN_PORT           (&stm_gpiob)
161 #define AO_SIREN_PIN            8
162
163 /* Alarm B */
164 #define AO_STROBE
165 #define AO_STROBE_PORT          (&stm_gpiob)
166 #define AO_STROBE_PIN           9
167
168 #define SPI_CONST       0x00
169
170 #define AO_PAD_NUM              1
171 #define AO_PAD_PORT             (&stm_gpioa)
172
173 #define AO_PAD_PIN_0            1
174 #define AO_PAD_ADC_0            0
175
176 #define AO_PAD_ALL_PINS         ((1 << AO_PAD_PIN_0))
177 #define AO_PAD_ALL_CHANNELS     ((1 << 0))
178
179 /* test these values with real igniters */
180 #define AO_PAD_RELAY_CLOSED     3524
181 #define AO_PAD_NO_IGNITER       16904
182 #define AO_PAD_GOOD_IGNITER     22514
183
184 #define AO_PAD_ADC_PYRO         2
185 #define AO_PAD_ADC_BATT         8
186
187 #define AO_PAD_ADC_THRUST       3
188 #define AO_PAD_ADC_PRESSURE     18
189
190 #define AO_ADC_FIRST_PIN        0
191
192 #define AO_NUM_ADC              5
193
194 #define AO_ADC_SQ1              AO_PAD_ADC_0
195 #define AO_ADC_SQ2              AO_PAD_ADC_PYRO
196 #define AO_ADC_SQ3              AO_PAD_ADC_BATT
197 #define AO_ADC_SQ4              AO_PAD_ADC_THRUST
198 #define AO_ADC_SQ5              AO_PAD_ADC_PRESSURE
199
200 #define AO_PYRO_R_PYRO_SENSE    200
201 #define AO_PYRO_R_SENSE_GND     22
202
203 #define AO_FIRE_R_POWER_FET     0
204 #define AO_FIRE_R_FET_SENSE     200
205 #define AO_FIRE_R_SENSE_GND     22
206
207 #define HAS_ADC_TEMP            0
208
209 struct ao_adc {
210         int16_t         sense[AO_PAD_NUM];
211         int16_t         pyro;
212         int16_t         batt;
213         int16_t         thrust;
214         int16_t         pressure;
215 };
216
217 #define AO_ADC_DUMP(p)                                                  \
218         printf ("tick: %5u 0: %5d pyro: %5d batt %5d thrust %5d pressure %5d\n", \
219                 (p)->tick,                                              \
220                 (p)->adc.sense[0],                                      \
221                 (p)->adc.pyro,                                          \
222                 (p)->adc.batt,                                          \
223                 (p)->adc.thrust,                                        \
224                 (p)->adc.pressure)
225
226 #define AO_ADC_PINS     ((1 << AO_PAD_ADC_0) | \
227                          (1 << AO_PAD_ADC_PYRO) | \
228                          (1 << AO_PAD_ADC_BATT) | \
229                          (1 << AO_PAD_ADC_THRUST) | \
230                          (1 << AO_PAD_ADC_PRESSURE))
231
232 #endif /* _AO_PINS_H_ */