git.gag.com Git - fw/altos/blob - src/kernel/ao_flight.c

   1 /*
   2  * Copyright © 2009 Keith Packard <keithp@keithp.com>
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  12  * General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along
  15  * with this program; if not, write to the Free Software Foundation, Inc.,
  16  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  17  */
  18
  19 #ifndef AO_FLIGHT_TEST
  20 #include "ao.h"
  21 #include <ao_log.h>
  22 #endif
  23
  24 #include <ao_flight.h>
  25
  26 #if HAS_MPU6000 || HAS_MPU9250
  27 #include <ao_quaternion.h>
  28 #endif
  29
  30 #ifndef HAS_ACCEL
  31 #error Please define HAS_ACCEL
  32 #endif
  33
  34 #ifndef HAS_GPS
  35 #error Please define HAS_GPS
  36 #endif
  37
  38 #ifndef HAS_USB
  39 #error Please define HAS_USB
  40 #endif
  41
  42 #if HAS_FAKE_FLIGHT
  43 #include <ao_fake_flight.h>
  44 #endif
  45
  46 #ifndef HAS_TELEMETRY
  47 #define HAS_TELEMETRY   HAS_RADIO
  48 #endif
  49
  50 /* Main flight thread. */
  51
  52 enum ao_flight_state    ao_flight_state;        /* current flight state */
  53 uint16_t                ao_boost_tick;          /* time of most recent boost detect */
  54 uint16_t                ao_launch_tick;         /* time of first boost detect */
  55 uint16_t                ao_motor_number;        /* number of motors burned so far */
  56
  57 #if HAS_SENSOR_ERRORS
  58 /* Any sensor can set this to mark the flight computer as 'broken' */
  59 uint8_t                 ao_sensor_errors;
  60 #endif
  61
  62 /*
  63  * track min/max data over a long interval to detect
  64  * resting
  65  */
  66 static uint16_t         ao_interval_end;
  67 #ifdef HAS_BARO
  68 static ao_v_t           ao_interval_min_height;
  69 static ao_v_t           ao_interval_max_height;
  70 #else
  71 static accel_t          ao_interval_min_accel_along, ao_interval_max_accel_along;
  72 static accel_t          ao_interval_min_accel_across, ao_interval_max_accel_across;
  73 static accel_t          ao_interval_min_accel_through, ao_interval_max_accel_through;
  74 #endif
  75 #if HAS_ACCEL
  76 static ao_v_t           ao_coast_avg_accel;
  77 #endif
  78
  79 #define init_bounds(_cur, _min, _max) do {                              \
  80                 _min = _max = _cur;                                     \
  81         } while (0)
  82
  83 #define check_bounds(_cur, _min, _max) do {     \
  84                 if (_cur < _min)                \
  85                         _min = _cur;            \
  86                 if (_cur > _max)                \
  87                         _max = _cur;            \
  88         } while(0)
  89
  90 uint8_t                 ao_flight_force_idle;
  91
  92 /* We also have a clock, which can be used to sanity check things in
  93  * case of other failures
  94  */
  95
  96 #define BOOST_TICKS_MAX AO_SEC_TO_TICKS(15)
  97
  98 /* Landing is detected by getting constant readings from both pressure and accelerometer
  99  * for a fairly long time (AO_INTERVAL_TICKS)
 100  */
 101 #define AO_INTERVAL_TICKS       AO_SEC_TO_TICKS(10)
 102
 103 #define abs(a)  ((a) < 0 ? -(a) : (a))
 104
 105 void
 106 ao_flight(void)
 107 {
 108         ao_sample_init();
 109         ao_flight_state = ao_flight_startup;
 110         for (;;) {
 111
 112                 /*
 113                  * Process ADC samples, just looping
 114                  * until the sensors are calibrated.
 115                  */
 116                 if (!ao_sample())
 117                         continue;
 118
 119                 switch (ao_flight_state) {
 120                 case ao_flight_startup:
 121
 122                         /* Check to see what mode we should go to.
 123                          *  - Invalid mode if accel cal appears to be out
 124                          *  - pad mode if we're upright,
 125                          *  - idle mode otherwise
 126                          */
 127 #if HAS_ACCEL
 128                         if (ao_config.accel_plus_g == 0 ||
 129                             ao_config.accel_minus_g == 0 ||
 130                             ao_ground_accel < ao_config.accel_plus_g - ACCEL_NOSE_UP ||
 131                             ao_ground_accel > ao_config.accel_minus_g + ACCEL_NOSE_UP
 132 #if HAS_BARO
 133                             || ao_ground_height < -1000 ||
 134                             ao_ground_height > 7000
 135 #endif
 136                                 )
 137                         {
 138                                 /* Detected an accel value outside -1.5g to 1.5g
 139                                  * (or uncalibrated values), so we go into invalid mode
 140                                  */
 141                                 ao_flight_state = ao_flight_invalid;
 142
 143 #if HAS_RADIO && PACKET_HAS_SLAVE
 144                                 /* Turn on packet system in invalid mode on TeleMetrum */
 145                                 ao_packet_slave_start();
 146 #endif
 147                         } else
 148 #endif
 149                                 if (!ao_flight_force_idle
 150 #if HAS_ACCEL
 151                                     && ao_ground_accel < ao_config.accel_plus_g + ACCEL_NOSE_UP
 152 #endif
 153                                         )
 154                         {
 155                                 /* Set pad mode - we can fly! */
 156                                 ao_flight_state = ao_flight_pad;
 157 #if HAS_USB && !HAS_FLIGHT_DEBUG && !HAS_SAMPLE_PROFILE && !DEBUG
 158                                 /* Disable the USB controller in flight mode
 159                                  * to save power
 160                                  */
 161 #if HAS_FAKE_FLIGHT
 162                                 if (!ao_fake_flight_active)
 163 #endif
 164                                         ao_usb_disable();
 165 #endif
 166
 167 #if !HAS_ACCEL && PACKET_HAS_SLAVE
 168                                 /* Disable packet mode in pad state on TeleMini */
 169                                 ao_packet_slave_stop();
 170 #endif
 171
 172 #if HAS_TELEMETRY
 173                                 /* Turn on telemetry system */
 174                                 ao_rdf_set(1);
 175                                 ao_telemetry_set_interval(AO_TELEMETRY_INTERVAL_PAD);
 176 #endif
 177 #if AO_LED_RED
 178                                 /* signal successful initialization by turning off the LED */
 179                                 ao_led_off(AO_LED_RED);
 180 #endif
 181                         } else {
 182                                 /* Set idle mode */
 183                                 ao_flight_state = ao_flight_idle;
 184 #if HAS_SENSOR_ERRORS
 185                                 if (ao_sensor_errors)
 186                                         ao_flight_state = ao_flight_invalid;
 187 #endif
 188
 189 #if HAS_ACCEL && HAS_RADIO && PACKET_HAS_SLAVE
 190                                 /* Turn on packet system in idle mode on TeleMetrum */
 191                                 ao_packet_slave_start();
 192 #endif
 193
 194 #if AO_LED_RED
 195                                 /* signal successful initialization by turning off the LED */
 196                                 ao_led_off(AO_LED_RED);
 197 #endif
 198                         }
 199                         /* wakeup threads due to state change */
 200                         ao_wakeup(&ao_flight_state);
 201
 202                         break;
 203                 case ao_flight_pad:
 204                         /* pad to boost:
 205                          *
 206                          * barometer: > 20m vertical motion
 207                          *             OR
 208                          * accelerometer: > 2g AND velocity > 5m/s
 209                          *
 210                          * The accelerometer should always detect motion before
 211                          * the barometer, but we use both to make sure this
 212                          * transition is detected. If the device
 213                          * doesn't have an accelerometer, then ignore the
 214                          * speed and acceleration as they are quite noisy
 215                          * on the pad.
 216                          */
 217                         if (ao_height > AO_M_TO_HEIGHT(20)
 218 #if HAS_ACCEL
 219                             || (ao_accel > AO_MSS_TO_ACCEL(20) &&
 220                                 ao_speed > AO_MS_TO_SPEED(5))
 221 #endif
 222                                 )
 223                         {
 224                                 ao_flight_state = ao_flight_boost;
 225                                 ao_launch_tick = ao_boost_tick = ao_sample_tick;
 226
 227                                 /* start logging data */
 228 #if HAS_LOG
 229                                 ao_log_start();
 230 #endif
 231
 232 #if HAS_TELEMETRY
 233                                 /* Increase telemetry rate */
 234                                 ao_telemetry_set_interval(AO_TELEMETRY_INTERVAL_FLIGHT);
 235
 236                                 /* disable RDF beacon */
 237                                 ao_rdf_set(0);
 238 #endif
 239
 240 #if HAS_GPS
 241                                 /* Record current GPS position by waking up GPS log tasks */
 242                                 ao_gps_new = AO_GPS_NEW_DATA | AO_GPS_NEW_TRACKING;
 243                                 ao_wakeup(&ao_gps_new);
 244 #endif
 245
 246                                 ao_wakeup(&ao_flight_state);
 247                         }
 248                         break;
 249                 case ao_flight_boost:
 250
 251                         /* boost to fast:
 252                          *
 253                          * accelerometer: start to fall at > 1/4 G
 254                          *              OR
 255                          * time: boost for more than 15 seconds
 256                          *
 257                          * Detects motor burn out by the switch from acceleration to
 258                          * deceleration, or by waiting until the maximum burn duration
 259                          * (15 seconds) has past.
 260                          */
 261                         if ((ao_accel < AO_MSS_TO_ACCEL(-2.5)) ||
 262                             (int16_t) (ao_sample_tick - ao_boost_tick) > BOOST_TICKS_MAX)
 263                         {
 264 #if HAS_ACCEL
 265 #if HAS_BARO
 266                                 ao_flight_state = ao_flight_fast;
 267 #else
 268                                 ao_flight_state = ao_flight_coast;
 269
 270                                 /* Initialize landing detection interval values */
 271                                 ao_interval_end = ao_sample_tick + AO_INTERVAL_TICKS;
 272
 273                                 init_bounds(ao_sample_accel_along, ao_interval_min_accel_along, ao_interval_max_accel_along);
 274                                 init_bounds(ao_sample_accel_across, ao_interval_min_accel_across, ao_interval_max_accel_across);
 275                                 init_bounds(ao_sample_accel_through, ao_interval_min_accel_through, ao_interval_max_accel_through);
 276 #endif
 277                                 ao_coast_avg_accel = ao_accel;
 278 #else
 279                                 ao_flight_state = ao_flight_coast;
 280 #endif
 281                                 ++ao_motor_number;
 282                                 ao_wakeup(&ao_flight_state);
 283                         }
 284                         break;
 285 #if HAS_ACCEL && HAS_BARO
 286                 case ao_flight_fast:
 287                         /*
 288                          * This is essentially the same as coast,
 289                          * but the barometer is being ignored as
 290                          * it may be unreliable.
 291                          */
 292                         if (ao_speed < AO_MS_TO_SPEED(AO_MAX_BARO_SPEED))
 293                         {
 294                                 ao_flight_state = ao_flight_coast;
 295                                 ao_wakeup(&ao_flight_state);
 296                         } else
 297                                 goto check_re_boost;
 298                         break;
 299 #endif
 300                 case ao_flight_coast:
 301
 302 #if HAS_BARO
 303                         /*
 304                          * By customer request - allow the user
 305                          * to lock out apogee detection for a specified
 306                          * number of seconds.
 307                          */
 308                         if (ao_config.apogee_lockout) {
 309                                 if ((int16_t) (ao_sample_tick - ao_launch_tick) <
 310                                     AO_SEC_TO_TICKS(ao_config.apogee_lockout))
 311                                         break;
 312                         }
 313
 314                         /* apogee detect: coast to drogue deploy:
 315                          *
 316                          * speed: < 0
 317                          *
 318                          * Also make sure the model altitude is tracking
 319                          * the measured altitude reasonably closely; otherwise
 320                          * we're probably transsonic.
 321                          */
 322 #define AO_ERROR_BOUND  100
 323
 324                         if (ao_speed < 0
 325 #if !HAS_ACCEL
 326                             && (ao_sample_alt >= AO_MAX_BARO_HEIGHT || ao_error_h_sq_avg < AO_ERROR_BOUND)
 327 #endif
 328                                 )
 329                         {
 330 #if HAS_IGNITE
 331                                 /* ignite the drogue charge */
 332                                 ao_ignite(ao_igniter_drogue);
 333 #endif
 334
 335 #if HAS_TELEMETRY
 336                                 /* slow down the telemetry system */
 337                                 ao_telemetry_set_interval(AO_TELEMETRY_INTERVAL_RECOVER);
 338
 339                                 /* Turn the RDF beacon back on */
 340                                 ao_rdf_set(1);
 341 #endif
 342
 343                                 /* and enter drogue state */
 344                                 ao_flight_state = ao_flight_drogue;
 345                                 ao_wakeup(&ao_flight_state);
 346                         }
 347                         else
 348 #else /* not HAS_BARO */
 349                         /* coast to land:
 350                          *
 351                          * accel: values stable
 352                          */
 353                         check_bounds(ao_sample_accel_along, ao_interval_min_accel_along, ao_interval_max_accel_along);
 354                         check_bounds(ao_sample_accel_across, ao_interval_min_accel_across, ao_interval_max_accel_across);
 355                         check_bounds(ao_sample_accel_through, ao_interval_min_accel_through, ao_interval_max_accel_through);
 356
 357 #define MAX_QUIET_ACCEL 2
 358
 359                         if ((int16_t) (ao_sample_tick - ao_interval_end) >= 0) {
 360                                 if (ao_interval_max_accel_along - ao_interval_min_accel_along <= ao_data_accel_to_sample(MAX_QUIET_ACCEL) &&
 361                                     ao_interval_max_accel_across - ao_interval_min_accel_across <= ao_data_accel_to_sample(MAX_QUIET_ACCEL) &&
 362                                     ao_interval_max_accel_through - ao_interval_min_accel_through <= ao_data_accel_to_sample(MAX_QUIET_ACCEL))
 363                                 {
 364                                         ao_flight_state = ao_flight_landed;
 365 #if HAS_ADC
 366                                         /* turn off the ADC capture */
 367                                         ao_timer_set_adc_interval(0);
 368 #endif
 369
 370                                         ao_wakeup(&ao_flight_state);
 371                                 }
 372
 373                                 /* Reset interval values */
 374                                 ao_interval_end = ao_sample_tick + AO_INTERVAL_TICKS;
 375
 376                                 init_bounds(ao_sample_accel_along, ao_interval_min_accel_along, ao_interval_max_accel_along);
 377                                 init_bounds(ao_sample_accel_across, ao_interval_min_accel_across, ao_interval_max_accel_across);
 378                                 init_bounds(ao_sample_accel_through, ao_interval_min_accel_through, ao_interval_max_accel_through);
 379                         }
 380 #endif
 381 #if HAS_ACCEL
 382                         {
 383 #if HAS_BARO
 384                         check_re_boost:
 385 #endif
 386                                 ao_coast_avg_accel = ao_coast_avg_accel + ((ao_accel - ao_coast_avg_accel) >> 5);
 387                                 if (ao_coast_avg_accel > AO_MSS_TO_ACCEL(20)) {
 388                                         ao_boost_tick = ao_sample_tick;
 389                                         ao_flight_state = ao_flight_boost;
 390                                         ao_wakeup(&ao_flight_state);
 391                                 }
 392                         }
 393 #endif
 394
 395                         break;
 396 #if HAS_BARO
 397                 case ao_flight_drogue:
 398
 399                         /* drogue to main deploy:
 400                          *
 401                          * barometer: reach main deploy altitude
 402                          *
 403                          * Would like to use the accelerometer for this test, but
 404                          * the orientation of the flight computer is unknown after
 405                          * drogue deploy, so we ignore it. Could also detect
 406                          * high descent rate using the pressure sensor to
 407                          * recognize drogue deploy failure and eject the main
 408                          * at that point. Perhaps also use the drogue sense lines
 409                          * to notice continutity?
 410                          */
 411                         if (ao_height <= ao_config.main_deploy)
 412                         {
 413 #if HAS_IGNITE
 414                                 ao_ignite(ao_igniter_main);
 415 #endif
 416
 417                                 /*
 418                                  * Start recording min/max height
 419                                  * to figure out when the rocket has landed
 420                                  */
 421
 422                                 /* initialize interval values */
 423                                 ao_interval_end = ao_sample_tick + AO_INTERVAL_TICKS;
 424
 425                                 ao_interval_min_height = ao_interval_max_height = ao_avg_height;
 426
 427                                 ao_flight_state = ao_flight_main;
 428                                 ao_wakeup(&ao_flight_state);
 429                         }
 430                         break;
 431
 432                         /* fall through... */
 433                 case ao_flight_main:
 434
 435                         /* main to land:
 436                          *
 437                          * barometer: altitude stable
 438                          */
 439                         if (ao_avg_height < ao_interval_min_height)
 440                                 ao_interval_min_height = ao_avg_height;
 441                         if (ao_avg_height > ao_interval_max_height)
 442                                 ao_interval_max_height = ao_avg_height;
 443
 444                         if ((int16_t) (ao_sample_tick - ao_interval_end) >= 0) {
 445                                 if (ao_interval_max_height - ao_interval_min_height <= AO_M_TO_HEIGHT(4))
 446                                 {
 447                                         ao_flight_state = ao_flight_landed;
 448
 449 #if HAS_ADC
 450                                         /* turn off the ADC capture */
 451                                         ao_timer_set_adc_interval(0);
 452 #endif
 453
 454                                         ao_wakeup(&ao_flight_state);
 455                                 }
 456                                 ao_interval_min_height = ao_interval_max_height = ao_avg_height;
 457                                 ao_interval_end = ao_sample_tick + AO_INTERVAL_TICKS;
 458                         }
 459                         break;
 460 #endif /* HAS_BARO */
 461 #if HAS_FLIGHT_DEBUG
 462                 case ao_flight_test:
 463 #if HAS_GYRO
 464                         printf ("angle %4d pitch %7d yaw %7d roll %7d\n",
 465                                 ao_sample_orient,
 466                                 ((ao_sample_pitch << 9) - ao_ground_pitch) >> 9,
 467                                 ((ao_sample_yaw << 9) - ao_ground_yaw) >> 9,
 468                                 ((ao_sample_roll << 9) - ao_ground_roll) >> 9);
 469 #endif
 470                         flush();
 471                         break;
 472 #endif /* HAS_FLIGHT_DEBUG */
 473                 default:
 474                         break;
 475                 }
 476         }
 477 }
 478
 479 #if HAS_FLIGHT_DEBUG
 480 static inline int int_part(ao_v_t i)    { return i >> 4; }
 481 static inline int frac_part(ao_v_t i)   { return ((i & 0xf) * 100 + 8) / 16; }
 482
 483 static void
 484 ao_flight_dump(void)
 485 {
 486 #if HAS_ACCEL
 487         ao_v_t  accel;
 488
 489         accel = ((ao_config.accel_plus_g - ao_sample_accel) * ao_accel_scale) >> 16;
 490 #endif
 491
 492         printf ("sample:\n");
 493         printf ("  tick        %d\n", ao_sample_tick);
 494 #if HAS_BARO
 495         printf ("  raw pres    %d\n", ao_sample_pres);
 496 #endif
 497 #if HAS_ACCEL
 498         printf ("  raw accel   %d\n", ao_sample_accel);
 499 #endif
 500 #if HAS_BARO
 501         printf ("  ground pres %d\n", ao_ground_pres);
 502         printf ("  ground alt  %d\n", ao_ground_height);
 503 #endif
 504 #if HAS_ACCEL
 505         printf ("  raw accel   %d\n", ao_sample_accel);
 506         printf ("  groundaccel %d\n", ao_ground_accel);
 507         printf ("  accel_2g    %d\n", ao_accel_2g);
 508 #endif
 509
 510 #if HAS_BARO
 511         printf ("  alt         %d\n", ao_sample_alt);
 512         printf ("  height      %d\n", ao_sample_height);
 513 #endif
 514
 515 #if HAS_ACCEL
 516         printf ("  accel       %d.%02d\n", int_part(accel), frac_part(accel));
 517 #endif
 518
 519
 520         printf ("kalman:\n");
 521         printf ("  height      %d\n", ao_height);
 522         printf ("  speed       %d.%02d\n", int_part(ao_speed), frac_part(ao_speed));
 523         printf ("  accel       %d.%02d\n", int_part(ao_accel), frac_part(ao_accel));
 524         printf ("  max_height  %d\n", ao_max_height);
 525         printf ("  avg_height  %d\n", ao_avg_height);
 526         printf ("  error_h     %d\n", ao_error_h);
 527 #if !HAS_ACCEL
 528         printf ("  error_avg   %d\n", ao_error_h_sq_avg);
 529 #endif
 530 }
 531
 532 static void
 533 ao_gyro_test(void)
 534 {
 535         ao_flight_state = ao_flight_test;
 536         ao_getchar();
 537         ao_flight_state = ao_flight_idle;
 538 }
 539
 540 uint8_t ao_orient_test;
 541
 542 static void
 543 ao_orient_test_select(void)
 544 {
 545         ao_orient_test = !ao_orient_test;
 546 }
 547
 548 const struct ao_cmds ao_flight_cmds[] = {
 549         { ao_flight_dump,       "F\0Dump flight status" },
 550         { ao_gyro_test,         "G\0Test gyro code" },
 551         { ao_orient_test_select,"O\0Test orientation code" },
 552         { 0, NULL },
 553 };
 554 #endif
 555
 556 static struct ao_task   flight_task;
 557
 558 void
 559 ao_flight_init(void)
 560 {
 561         ao_flight_state = ao_flight_startup;
 562 #if HAS_FLIGHT_DEBUG
 563         ao_cmd_register(&ao_flight_cmds[0]);
 564 #endif
 565         ao_add_task(&flight_task, ao_flight, "flight");
 566 }