1 altos (0.6+230+g15a6791) unstable; urgency=low
4 * Telemetry code was mis-computing RSSI
5 * Switch DBG pins to GPIO when using any debug commands. Reboot to
9 * significant documentation update
11 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:08:06 -0600
13 altos (0.6+224+g4766b13) unstable; urgency=low
16 * documentation updates from Bob
19 * Extension to KML output format, and minor bug fix
22 * ao-view: disable radio telemetry monitoring during channel change
23 * Add special code for USB panic's.
24 * ao-postflight: was walking off state.data array
25 * Abort any in-progress radio operation when changing radio channel
27 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
29 altos (0.6+214+g16c4cae) unstable; urgency=low
32 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
33 * merge a derivative of Bob Finch's mere mortals guide as getting started
34 * merge the altusmetrum-themes package
37 * Fix telemetrum.inf, tested by Adrian and Keithp
38 * Finish basic flight monitoring UI with voice using FreeTTS
40 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
42 altos (0.6+204+g6bd8513) unstable; urgency=low
44 * lose the quotes since they apparently aren't necessary
46 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
48 altos (0.6+202+gae6854d) unstable; urgency=low
50 * update desktop file for conformance with current standards
52 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
54 altos (0.6+200+g68eaaa6) unstable; urgency=low
56 * add initial package build scripts for Arch Linux from Bob Finch
57 * add desktop file provided by Bob Finch
59 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
61 altos (0.6+195+gcde60f1) unstable; urgency=low
63 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
65 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
67 altos (0.6+193+g314d27a) unstable; urgency=low
70 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
72 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
74 altos (0.6+190+g8b6767e) unstable; urgency=low
77 * Fix all stdio reading functions to be __critical
78 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
80 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
82 altos (0.6+187+g8702f49) unstable; urgency=low
85 * more text created during SFO->DEN flight
86 * initial attempt at a telemetrum turn on script .. needs work
89 * Revert "Add optional 's' command to packet slave to enable/disable
91 * Disable interrupts while reading from stdin
93 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
95 altos (0.6+180+g99094f0) unstable; urgency=low
98 * Increase reset switch time to 100ms
99 * Add optional 's' command to packet slave to enable/disable slave
101 * More ALtosUI changes
102 * Autodetect flite voice registration function
105 * capture work done on SFO->DEN flight
106 * add some RF usage information from an email reply sent today, and
109 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
111 altos (0.6+171+g9394393) unstable; urgency=low
117 * Only have the slave return a packet if it received one.
119 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
121 altos (0.6+168+gc0ee1ae) unstable; urgency=low
124 * INSTALL file changed by auto tools
127 * libflite may forget to reference libasound
129 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
131 altos (0.6+164+g5c3b6e2) unstable; urgency=low
134 * Start adding java-based UI
135 * Add telemetry data parsing code
136 * Add Windows install .inf file
137 * Fix windows install file
138 * Add telem parsing code
139 * Steal C code from ao-view
140 * Display table of flight info. gps is not working yet though
141 * Fix up table formatting
144 * Clean up GPS data formatting
145 * Report current gps nsat, not last locked nsat
146 * Remove GPS data missing from skytraq. Save max height/accel/speed
147 * Remove unused cell renderer class
149 * Use RXTX for serial comm. Add logdir preference saving
150 * Make ao_radio_idle keep trying to get the radio to idle.
151 * Don't abort the radio when enabling telemetry monitoring
152 * Clean up some altosui comments
153 * Switch TeleMetrum from v0.2 to v1.0
154 * Add Linux device discovery
155 * Interrupt running replay thread when starting another replay
156 * serial port read function cannot be interrupted. poll every 1 second
157 * TD reports "not-connected" when GPS has 0 sats
158 * Tasks may move in task structure as a result of ao_exit
159 * Enable telemetry monitoring
160 * Use 16-bit flite voice (which appears to have changed symbols
162 * When changing RESET line, delay 20ms
165 * choose a better set of docbook xsl files
167 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
169 altos (0.6+131+g6629ec5) unstable; urgency=low
171 * lose the url entirely for now
173 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
175 altos (0.6+129+g934434f) unstable; urgency=low
179 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
181 altos (0.6+127+g05ad583) unstable; urgency=low
183 * need another build dep
185 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
187 altos (0.6+125+g8f1d47e) unstable; urgency=low
190 * tweak copyright assertion
191 * crudely incorporate "day in the life" info from web page
192 * rewrite urls in docbook format
194 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
196 altos (0.6+119+g00f49c8) unstable; urgency=low
199 * update changelogs for Debian build
200 * move gbp.conf into debian/
201 * initial harness for documentation
205 * Round radio calibration value instead of truncating
206 * Document the ao-dumplog '--remote' flag for radio-link downloads
208 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
210 altos (0.6+108+g6e61170) unstable; urgency=low
213 * Need to duplicate new altitude conversion code in aoview.
215 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
217 altos (0.6+106+ga1478f6) unstable; urgency=low
220 * Add ao_radio_xmit to help test boards without flashing them.
221 * Allow product names to have suffixes (like board revisions)
222 * Fix and document the ao-rawload --run flag
224 * Leave .ihx files in the build directory too - easier to debug that way
225 * Eliminate deadlock when writing config from radio link
226 * Fix up LED colors for each product.
227 * Add .gitignore for ao-bringup
230 * create a turn on script for lighting up TeleDongle v0.2 boards
232 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
234 altos (0.6+95+g2f45953) unstable; urgency=low
236 * update changelogs for Debian build
237 * conditionalize use of git on executability of /usr/bin/git binary
239 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
241 altos (0.6+88+gdeccc10) unstable; urgency=low
243 * add gawk as a build dependency since strtonum is a gawk extension
245 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
247 altos (0.6+86+g2491282) unstable; urgency=low
250 * Disable monitor mode before attempting radio test.
251 * Ensure that ao_alarm waits at least the specified time
252 * Remove dbg driver code from telemetrum/teledongle
253 * Add AT45DBxx1D driver
254 * Remove green LED and temp sensor from v0.2 code
255 * Add at45db161d.h header file for new flash part.
256 * Add 'f' command to display flash status register contents
257 * Dump more flash parameters for the flash_status command
258 * Dump config block from read/write config and flash_status commands
259 * Don't set ao_flash_setup_done until we're actually done.
260 * Remove flash debugging printfs
261 * Add simple gps dump command 'g'
262 * Force idle mode by shorting the SPI clock to ground at boot time.
263 * Switch to using internal cc1111 temperature sensor
264 * Missing ao_mutex_put in gps_dump
265 * Compute daytime using GPS as time base
266 * Pull in a bit more data for filtering the start of the boost
267 * Log GPS data on pad after boost detect.
268 * Change barometer conversion code to shrink conversion table
269 * Change altos build process to support per-product compile-time
271 * Update .gitignore files
273 * Add back stack size checking to altos linking phase
274 * Must install .map files for ao-load to work
276 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
278 altos (0.6+60+g10d1bbc) unstable; urgency=low
281 * Use ao_radio_get/ao_radio_put in packet code.
283 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
285 altos (0.6+58+gbbb152c) unstable; urgency=low
288 * Re-order config values. Change frequency to cal
289 * Allow radio calibration to be set from ao-load
290 * Add --cal to man page
292 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
294 altos (0.6+53+gcd49847) unstable; urgency=low
297 * Remove send_serial and serial_baud commands.
298 * Make ao_cmd_decimal produce both 32 and 16 bit values.
299 * Add radio calibration configuration.
301 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
303 altos (0.6+49+g9a1d7dd) unstable; urgency=low
306 * Change default callsign to "N0CALL"
308 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
310 altos (0.6+47+g4053309) unstable; urgency=low
312 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
313 * change home URL in control file to be the AltOS page
315 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
317 altos (0.6+43+gd6ba07e) unstable; urgency=low
320 * Decode HDOP data from skytraq GPS
321 * Document ao-postflight --gps and --kml options.
322 * Make ao-postflight create filenames using input filenames.
323 * Make TD print 0000-00-00 for invalid dates.
324 * Fix --plot arg handling. Add -all option.
325 * Convert telemetry file GPS satellite information in cc_log_read
326 * Don't crash if --plot isn't passed on ao-postflight command line
327 * ao-postflight: compute barometric alt for each GPS position
328 * ao-postflight: don't try to use missing gps sat data
329 * Automatically extract flight number for eeprom and telem filenames.
331 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
333 altos (0.6+32+g87e6f3e) unstable; urgency=low
336 * fix typo in comment
339 * Reduce igniter firing time from 500ms to 50ms.
340 * Add GPS date/time output to ao-postflight.
341 * Eliminate SiRF state values from ao-view.
343 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
345 altos (0.6+27+gb0d7e3f) unstable; urgency=low
348 * Add two-point accelerometer calibration.
349 * Remove "l" command as ao-dumplong no longer uses it
352 * Reformat ADC values to show all 16 bits
353 * ao_flight_test was using accel value for pressure too
354 * Pass accel calibration over telemetry stream. Telemetry data format
356 * Add ability to dump eeprom data over radio link.
357 * In packet master, move USB flush from packet thread to echo thread
358 * In USB pollchar, wait for packet before re-checking USB out len
359 * Explicitly use USB I/O routines in packet code
360 * Flush pending input when switching to remote packet mode
361 * Stop recording in ao-dumplog after receiving an invalid block
362 * Move ao_match_word from ao_ignite.c to ao_cmd.c
363 * Add Watchdog Timer Control register definitions
364 * Add reboot command.
365 * Return radio to telemetry settings when packet system closed.
366 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
367 * Loosen tolerances for main->landed transition
368 * Provide a dummy 'uninstall' target in the src directory.
369 * Share telemetry parsing code in cc library.
370 * Enable telemetry receive in ao_view
371 * Switch order of serial/flight in ao-postflight summary
372 * Add flight number to telemetry stream.
373 * Add date to GPS data, captured from GPRMC packet.
374 * Stop using SiRF state info.
376 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
378 altos (0.6) unstable; urgency=low
381 * Add support for the SkyTraq GPS unit
382 * Build two versions of TM, one for SiRF, one for SkyTraq
383 * Save some DSEG space by marking cmd functions __reentrant
384 * Add ao_wake_task and ao_exit
385 * Add keyhole-markup generation for ao-postflight.
386 * Initial packet bits. Just testing transmission
387 * Add radio carrier command
388 * Wait for TX to finish sending data
390 * Remove reason from ao_dma_abort
391 * Switch packet code from timer thread to ao_alarm
392 * Use ao_radio_done to wait for TX to completely finish with packet
393 * Send SYN packet to set sequence numbers
395 * Do more flushing in packet test code
396 * Use ao_alarm for ao_delay so it can be easily interrupted
397 * Poke master to speed up packet rate when things are busy
398 * No need to wakeup &ao_tick_count now
399 * Enable packet-based communcation to command processor
400 * Add more docs to the README file
401 * Disable interrupts while removing tasks from task list
402 * Add ao_usb_pollchar to ao.h
404 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
406 altos (0.5+90+g127c312) unstable; urgency=low
408 * de-version the libreadline-dev build dependency
410 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
412 altos (0.5+86+g2de548f) unstable; urgency=low
414 * automate push of updated and tagged master branch during
415 debian/rules prebuild
416 * flush repetitive junk out of debian/changelog, and update the
418 * add support for tagging git repository on each Debian package build
420 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
422 altos (0.5+77+gc57bd7f) unstable; urgency=low
424 * build for Debian from git
426 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600