1 altos (0.8.1+71+gda42f40) unstable; urgency=low
4 * doc: Add telemetrum mounting template in svg and pdf forms
7 * Re-order and re-arrange eeprom download dialog
8 * Convert EepromSelect dialog to use a GridBag
9 * Close serial port if Download/Delete dialog is cancelled.
12 * altosui: Reset eeprom download instance variables before reading
14 * altosui: Make serial debug more complete and accurate
15 * altosui: Use long input flush timeout when remote.
16 * altosui: Remove debug message when eeprom downloads are complete.
17 * altosui: Ensure serial device is closed after eeprom download
19 * altosui: Require 4 sats to light up the 'GPS locked' light.
20 * doc: inkscape tracks the filename inside the document
21 * altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
22 * altos: Flush log when full
25 * altos: Restructure skytraq NMEA parsing code to save some space
28 * altos: average 512 accel/baro samples at startup instead of 1000
31 * altos: Added check for an accel value above 1.5g
32 * altos: Added check for out of bounds accel
35 * altos: Add DATA_TO_XDATA to linux test harness
36 * altosui: Remove spurious colons from eeprom selection headers
39 * Rework invalid accel cal detection code
42 * altos: Auto-calibrate linux-based flight testing code
43 * altos: Ensure flight code gets first crack at new ADC data
44 * altos: Sample the accelerometer reference voltage on v1.1 boards
45 * altos: Optimize fetching of ADC data in flight code
46 * altos: Use 5V reference data to correct accelerometer measurements.
47 * doc: Remove mention of ao_wake_task
50 * update documentation to reflect reality that modifying a board for
51 separate pyro battery is not trivial
53 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 17:26:33 -0700
55 altos (0.8.1+42+g646e192) unstable; urgency=low
58 * altosui: Show dialog after successful delete or when no flights
59 * altosui: Ensure serial line is flushed after disabling remote link
60 * altosui: Add preference for serial debugging.
62 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 18:00:51 -0700
64 altos (0.8.1+37+g97b1ca9) unstable; urgency=low
67 * altos: Add configuration parameter for maximum flight log size
68 * altos: support storage of multiple flights.
69 * altos: Speed up at45 and 25lc erase speeds
70 * altos: white space fix
71 * altos: report flight log offsets in hex block numbers instead of
73 * altos: ensure erase mark is written when erasing flights
76 * altos: Optimize Morse code generation
79 * altos: Check requested log max size against available space
80 * altos: Check for full log and complain
81 * altosui: Add configuration of flight log size
84 * altos: Remove unused accel_vel_mach and accel_vel_boost variables
85 * altos: Remove redundant initialization of ao_interval variables
88 * altosui: Split eeprom download code apart
89 * altos: oops -- 'e' command was only showing 7 of the 8 bytes per
91 * altosui: Add support for parsing list of flights from the 'l'
93 * altosui: Add eeprom 'manage' ui to download and delete multiple
95 * altos: check for valid flight number in ao_log_delete
97 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 14:30:37 -0700
99 altos (0.8.1+18+g408a3e0) unstable; urgency=low
102 * altosui: move maps to subdir, fix E/W mismatch
105 * altos: clean up radio abort paths. Share radio code.
106 * altos: eliminate ao_wake_task
107 * windows: Add compatibility IDs to telemetrum.inf
108 * windows: Update NSIS installer file to use compatibility IDs
109 * altos: Split out SPI driver.
110 * altos: Add telemetrum-v1.1 directory
111 * altos: packet and usb i/o routines use 'char', not 'uint8_t'
112 * altos: Simplify storage API
113 * altos: Require manual flight erasing.
114 * altos: Move common storage code to ao_storage.c. Add M25P80 driver
115 * altos: Rip out 'optimization' in ao_log_scan
116 * altos: Mark end of available flight list with 'done' to make the UI
118 -- Bdale Garbee <bdale@gag.com> Fri, 07 Jan 2011 00:51:41 -0700
120 altos (0.8.1+4+gea95c06) unstable; urgency=low
122 * fix symlink paths in rules file
124 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:14:24 -0700
126 altos (0.8.1+2+gea7130e) unstable; urgency=low
128 * modify Debian package build to deliver one copy of background.png
131 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:03:14 -0700
133 altos (0.8.1) unstable; urgency=low
136 * moved doc dir in web content to AltOS tree
137 * fix publish target in doc/Makefile
138 * fix section layering
139 * fix an Altos vs Altus typo in the docs
140 * adding Bdale's release process document to the source tree
143 * windows: Add jfreechart.jar and jcommon.jar to windows install image
144 * Move "Releasing" to top level
145 * Add minimal release testing plan to Releasing
150 -- Bdale Garbee <bdale@gag.com> Mon, 29 Nov 2010 21:46:54 -0700
152 altos (0.8) unstable; urgency=low
155 * altosui: Correct windows hardware IDs for nsis installer file
156 * windows: try harder to get windows install to work
157 * windows: remove some non-existent .inf file section references
158 * windows: more .inf file hacking
159 * windows: Bump .inf file version
162 * declaring 0.8 released
163 * update changelogs for Debian build
164 * update changelogs for Debian build
165 * rewind changelog to recover from stupid build failure
167 -- Bdale Garbee <bdale@gag.com> Sun, 28 Nov 2010 18:32:12 -0700
169 altos (0.7.1+168+gcb08bc2) unstable; urgency=low
172 * altosui: Split out flight monitoring to separate window
173 * altosui: Create buttons for main actions
174 * altosui: Fix channel setting at serial open time
175 * altosui: Fix more calls to AltosPreferences.channel()
176 * altosui: Create abstract interface for flight data display
177 * altosui: Add tab UI with 'pad' mode.
178 * altosui: Add ascent, descent and landed tabs
181 * Updated PKGBUILD-git.altos
184 * altos: Use grey leds when unlit - easier to see
187 * use value_font for values
188 * add --replay command line argument
189 * read preferences for --replay
190 * reduce font size for FlightInfoTable
191 * use grayled.png for off
192 * add compass bearing to voice output
193 * add compass bearing during descent
194 * add site map tab, at least for QRS launches
196 * make infotable scrollable, revert its fontsize to 14
197 * pull up maps for arbitrary locations
198 * better error behaviour if no map
201 * first cut at instructions on how to re-flash TM and TD devices based
203 * fold in content from Keith's email on the re-flashing subject
206 * altosui: Add RF calibration to TeleMetrum config dialog
209 * AltosTelemetryReader: actually open serial port
210 * AltosSiteMap: add targeting circles around landing site
213 * continuing to work on the docs
216 * altosui: Eliminate unncessary import altosui lines
217 * altosui: Open serial device at 'new' time. Prohibit duplicate opens.
218 * altosui: Replace flight status table with labels, fix resize.
219 * altosui: With --replay option, exit when replay window is closed
220 * altosui: oops, missed a file in the previous commit
221 * altosui: eliminate menu bar, moving elements to buttons.
222 * altosui: add reboot button to telemetrum configuration UI
225 * add a paragraph about forcing TM back to idle mode if an accel cal
229 * altosui: Add callsign configuration in AltosUI configuration dialog
230 * altosui: Cleanup flight UI layout
231 * altosui: Add igniter status to ascent and descent tabs
234 * altosui: tile site maps
235 * AltosSiteMapTile: autoscale to about 2 nmi per tile
236 * AltosSiteMapTile: adjust centering calculation
237 * AltosSiteMapTile: adjust scale to 1 nmi per tile
240 * altosui: Add igniter ground testing code
241 * altosui: Unify datafile selection to AltosDataChooser
242 * altosui: Clean up global AltosUI configuration settings dialog
243 * doc: Add preliminary altosui documentation
244 * doc: git ignore generated doc files
245 * doc: Document the 'Flash Image' operation.
246 * altosui: Use timeouts to recover from broken packet links.
249 * update turnon scripts to use stashed copies of stable release
253 * altosui: switch channel selector to combo box. Shorten displayed
255 * altosui: When switching log files, don't terminate log thread
256 * altosui: calling thread.interrupt with null thread doesn't work well
257 * altosui: Initialize display thread state in constructor instead of
259 * altosui: Fix channel changing in flight UI to actually work
262 * AltosSiteMap: add autoscroll and grabndrag scroll
263 * AltosSiteMapTile: seperate map and drawing layers
264 * AltosSiteMap: automatic fetching of map data
265 * AltosSiteMapTile: draw boost circle as well as landed
266 * AltosAscent/Descent: tidy up layout
267 * AltosDescent: switch elev from height to range
273 * AltosSiteMap: major refactoring
277 * altosui: change descent tab formatting to four columns
280 * AltosSiteMap: be more polite about preferred size
284 * altosui: Rewrite info table to mix with scroll pane well. Fix
288 * AltosSiteMap: better gps check, lower zoom
291 * altosui: Set site map flight path lines to 6 pixels anti-aliased.
294 * AltosSiteMap: explain tile size better
295 * AltosSiteMap: extend map if rocket goes far away
296 * AltosSiteMap: try to get new tile construction right
297 * AltosSiteMap: thread safe tile addition
298 * AltosSiteMap: refactor tile collection
299 * AltosSiteMap: never accept 0,0 as lat/long
300 * AltosSiteMap: limit nr of tiles to 200x200
303 * altosui: When fixing eeprom gps time information, make GPS data
307 * AltosSiteMap: ensure buffer around active tile
308 * altosui: improve sitemap scrolling behaviour
309 * altosui: keep sitemap more centred on rocket
312 * altos: Add on/off modes to 'C' command
315 * Added PKGBUILDs for deps into contribs
318 * altosui: Close serial port when debug link fails
319 * altos: assume igniter worked.
322 * add a rudimentary --help for command line use
325 * doc: Add internal documentation for AltOS
328 * altosui: don't switch away from user selected tab
329 * altosui: sitemap uses rocket gps if no pad gps
332 * merge Keith's AltosUI documention into "the big book"
333 * lose the placeholder on how GPS works, as it's going to be a
336 * altos: remove unused variable from ao_igniter
337 * altos: Don't abort radio transmissions with ao_radio_abort
338 * altos: Make radio test command careful with the radio mutex.
339 * altosui: Make AltosSerial.flush_input keep reading while non-empty
340 * altosui: New AltosSerial.set_radio function sets channel/call
341 * altosui: Disable radio configation over packet link.
342 * altosui: Let people fire igniters that don't read as 'ready'
343 * altosui: Make sure packet mode is turned off when the connection
347 * docs: Document altosui "Graph Data" button
350 * Move altosui to the top level, placing libaltos inside it.
353 * doc: Document altosui "Site Map" tab
356 * Missing change to top level Makefile to build altosui
359 * fix missing section close in Site Map content
361 * manually fold in documentation work from the master branch
364 * doc: Reformat altos to use sections for each function
365 * doc: Add more authors, fix URL formatting, note that AltosUI
367 * doc: Rename telemetrum-doc as altusmetrum
371 -- Bdale Garbee <bdale@gag.com> Thu, 25 Nov 2010 01:10:18 -0700
373 altos (0.7.1+36+g811ced6) unstable; urgency=low
376 * remove the csv build dep, as that code will be abandoned
379 * altosui: Remove ability to graph data in .csv files
380 * altosui: Separate out jfreechart and jcommon directories
382 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 17:47:32 -0600
384 altos (0.7.1+32+g8103432) unstable; urgency=low
386 * add build-dep on libcsv-java
388 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:25:57 -0600
390 altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
393 * make the column headers comma separated, too, so they align with the
397 * altosui: set default .csv file name in file save dialog
398 * altosui: Remember directory containing firmware files
402 * Add JFreeChart to Makefile.am
405 * altosui: Use recorded ground acceleration when reading eeprom files
406 * altosui: Write raw sensor data to .csv files
407 * altosui: Factor some UI elements into separate classes
408 * altosui: remove unused ReplayThread wrapper classes
409 * altosui: Require 4 sats for 'good' GPS data
410 * altosui: Create iterables for log file scanning. Split out display
412 * altosui: .CSV output: add link quality, gps hdop and sat C/N0
414 * altosui: Deal with eeprom dates going backwards across wrap
417 * Hax0r graphing to support telem/eeprom files
420 * altosui: use Altos constants in graphing code
423 * Add callsign/serial/flight to graph title
426 * altosui: Add KML file export.
429 * add build dep on jfreechart lib
431 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:19:12 -0600
433 altos (0.7.1) unstable; urgency=low
436 * Add firmware and libaltos to 'fat' target at top-level
437 * altosui: Remove some debug printfs.
438 * altosui: libaltos.so is built with libtool -- it's in
440 * Add --with-fat-dir configure option to publish finished stand-alone
442 * altosui: Fix telemetry file reader to handle tick count wrapping
443 * altosui: Remove debug printfs from AltosTelemetryReader
444 * altosui: Fill in time value of last Eeprom record read from file
445 * altosui: Stop parsing eeprom file after hitting 'landed' state
447 -- Bdale Garbee <bdale@gag.com> Fri, 10 Sep 2010 00:09:02 -0600
449 altos (0.7+96+g48f5799) unstable; urgency=low
452 * altosui: conflating USB product and vendor IDs is a bad idea
454 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 21:29:13 -0600
456 altos (0.7+94+g1ac3d7e) unstable; urgency=low
458 * initial cut at an altosui man page
460 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:34:38 -0600
462 altos (0.7+92+g0ea7576) unstable; urgency=low
465 * handle versioning of ihx files (poorly) by just wildcarding the file
469 * altosui: Need to have JVM include path substituted into libaltos
471 * altosui: Store libaltos.so in $(libdir)/altos
472 * altosui: Display error dialog when AltOS JNI library can't be loaded
474 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:05:44 -0600
476 altos (0.7+86+g6c0ae7e) unstable; urgency=low
479 * altosui: Add explicit requirement to create classes directory
480 * altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
482 * altosui: hack to make JAVAROOT directory get created before javac
484 * altosui: remove FATJAR from all-local to avoid building fat .jar
488 * add libtool to build deps
491 * altosui: Add windows installer build using 'nsis'
492 * altosui: ignore built files
493 * altosui: oops. renamed the nsis file to altos-windows.nsi
494 * icon: add some icons for application programs
495 * altosui: Add icons to application and Windows menus.
496 * Use autotools for altosui and libaltos
497 * altos: add some SDCDB config files
498 * Ignore libtool files.
499 * Add version numbers to released files. Set version to 0.7.1
500 * Add top-level 'fat' target to aid building distribution files
501 * altosui: Fix windows installer to ship correct files
502 * altosui: Fix up Mac OSX .zip file
503 * altosui: Fix linux fat distribution
504 * altosui: Return AO_LOG_INVALID instead of exception for eeprom files
505 * altosui: Remove debugging printf from AltosEepromReader
506 * altosui: Eeprom files contain only one date; save it.
507 * altosui: Add elevation and range data to main display
508 * altosui: When replay thread is interrupted, don't make final report
509 * altosui: Start idle thread after the rocket leaves the pad
510 * altosui: Add AltosVoice.drain() to wait for queued speech to finish
511 * altosui: Prevent voice altitude data from queueing up
512 * altosui: Use local .class files in the classpath
513 * altosui: Record flight number when scanning file, not when running
514 * altosui: eeprom files place 'boost' time in the flight number
516 * altosui: ensure that 'altosui' script is installed. Pass arguments
519 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 15:43:28 -0600
521 altos (0.7+53+g59798c6) unstable; urgency=low
524 * altosui: Abort flashing if debug port isn't working
525 * altosui: allow flashing to be canceled from the rom config dialog
526 * altosui: Hide internal rom config UI helper function
527 * altosui: Remove some debug printfs from AltosRomconfig class
528 * altosui: Post error dialog on invalid ROM config values.
529 * altosui: build Mac OS .zip file to include paths
530 * altosui: Report telemetry CRC errors in UI
531 * altosui: Deal with altos bug setting radio channel while monitoring
532 * altosui: Allow 'connect to device' when already connected
533 * Revert "altosui: Deal with altos bug setting radio channel while
535 * altosui: Must flush serial line after configuring for telemetry
536 * altosui: Catch I/O errors on telemetry device, report to user
538 -- Bdale Garbee <bdale@gag.com> Sat, 04 Sep 2010 00:46:12 -0400
540 altos (0.7+40+g59a40f6) unstable; urgency=low
543 * add distclean targets to libaltos and altosui to all Debian package
544 to build, and clean up other distclean content as needed
547 * altosui: missed AltosReader.class in the Makefile
548 * altos: Bounds check Skytraq GPS tracking data array
549 * altosui: Remove Manifest.txt from git repo as it's built now
551 -- Bdale Garbee <bdale@gag.com> Thu, 02 Sep 2010 00:44:15 -0400
553 altos (0.7+28+gd006c5e) unstable; urgency=low
555 * add runtime dependencies for altos binary package
557 -- Bdale Garbee <bdale@gag.com> Tue, 31 Aug 2010 00:20:00 -0400
559 altos (0.7+26+gc35632e) unstable; urgency=low
561 * don't build all the "fat" jar deliverables by default
563 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:37:40 -0600
565 altos (0.7+23+g25764fc) unstable; urgency=low
568 * fix up for an 0.7 release
569 * update changelogs for Debian build
572 * libaltos: AltusMetrum devices use more than one USB ID.
573 * altosui: provide separate flush_input/flush_output for serial. deal
574 with monitor automatically
575 * altosui: discard invalid lines while reading Eeprom flight data
576 * libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
577 * libaltos: Missing OS_LDFLAGS on cjnitest build
578 * libaltos: cjnitest needs altos_flush now
579 * altos: flush pending output when terminating packet mode
580 * altos: Abort radio harder when terminating packet mode.
581 * altos: shut down packet mode cleanly
582 * libaltos: Fix windows build.
583 * libaltos: Improve Makefile
584 * Update telemetrum.inf to include all current USB ids.
585 * libaltos: Add pre-built Mac OS X libaltos.dylib
586 * libaltos: Add pre-built Windows .dll
587 * altos: Windows sends USB Out packets of 0 length. Ack them.
588 * libaltos: Use overlapped I/O on windows
589 * altosui: Build linux, mac and windows archives on Linux
590 * altosui: build debian-style altosui too
591 * altosui: Devices with USB id 0x000a always get listed
594 * continue even if rm's don't have anything to do
595 * make invocation of 'install' pathless to work on more Unix variants
596 * add a .gitattributes file, configuring the Mac and Windows binary
599 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:07:13 -0600
601 altos (0.7) unstable; urgency=low
603 * update changelogs for Debian build
604 * fix up for an 0.7 release
606 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 22:25:38 -0600
608 altos (0.6+375+g0bd4cc0) unstable; urgency=low
610 * fix path to installed shared library
612 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 13:13:14 -0600
614 altos (0.6+373+gcf65c6b) unstable; urgency=low
617 * altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
619 * altosui: Capture config and version info in .eeprom files
620 * altosui: Merge gps date and time classes into gps class
621 * altosui: Clear displayed data rows as needed.
622 * altosui: Split status and info panels into separate files
623 * altosui: Explicitly initialize Altos class
624 * altosui: Split flight record out of telemetry class
625 * altosui: Compute flight state from eeprom data
626 * altosui: Add comments to Eeprom reader
627 * altos: add callsign to packet mode, increase payload to 64 bytes
628 * altosui: Start adding code to write csv files from eeprom/telem
630 * ao-dumplog: add --channel option (for use with -R option)
631 * libaltos: integrate Windows support.
632 * altosui: Select devices by USB vendor/product ID.
633 * altos: Define USB product ID in per-product Makefile.defs file
634 * altosui: Make teledongle callsign configurable
635 * altosui: Add TeleMetrum configuration
636 * altosui: Set callsign when fetching eeprom data over the air
639 * add freetts as a build dep
640 * working on java packaging details
643 * altosui: Add .ihx file reading code and stub out flashing UI
644 * altosui: Add debug dongle API, split flash UI out
645 * ao-dumplog: Fix --remote and --channel options to actually work
646 * altosui: pad TM config dialog values to avoid clipping descenders
647 * libaltos: use pipe to wake up getchar on close. use mutexes
648 * altosui: Add lots more cc1111 debug interface functions
649 * altosui: remove debug printf from AltosHexfile
650 * altosui: flush serial output before waiting for reply
651 * altosui: Remove debug printf from AltosRomconfig
652 * altosui: Finish device programming code
653 * altos: Place rom config variables in fixed location
654 * altosui: make default Manifest look for built-in freetts
655 * altosui: Separate out log file choosing dialog to share with CSV
657 * altosui: refactor logfile chooser dialog to share more code
658 * altosui: Add ability to create CSV file from telem or eeprom files
659 * altosui: disable radio monitoring while using serial line for
661 * altosui: Delay mapping Flash UI until flashing actually starts
662 * altosui: fetch existing romconfig for flashing
663 * altosui: always display romconfig ui while flashing
664 * altosui: write USB serial number string while flashing
665 * altosui: flush replies from serial link when entering debug mode
666 * altos: always rebuild ao_product.c to track git version
667 * altos: print GPS state flags in GPS 'g' command
668 * altos: mark gps date written only after it gets into eeprom
669 * altosui: Move number parsing code to Altos general class
670 * altosui: Add AltosGreatCircle constructors
671 * altosui: add rssi and distance/dir from pad to CSV files
672 * altosui: AltosEepromReader was mis-setting boost tick
673 * altosui: Add support for old (version < 3) telemetry files
674 * altosui: Serial line is in UTF-8 encoding. Deal with it.
675 * altosui: When parsing saved telem files, errors shouldn't abort file
676 * altosui: Remove debug printf from AltosState.java
677 * altosui: command line args are converted to csv format
678 * altos: prepare for sdcc 2.9.1
681 * add a dummy install target
682 * lose the prebuild hook for now while I'm fumbling
683 * add install target for libaltos
684 * add an install target for altosui
687 * altosui: add elevation and range information
690 * fix up the wrapper's path to the jar file
691 * update Debian standards version
692 * fix permissions on installed jar file, switch from ao-view to
694 * install altosui man page
695 * fix man page delivery path
696 * Revert "lose the prebuild hook for now while I'm fumbling"
698 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 12:40:04 -0600
700 altos (0.6+303+gb6da90b) unstable; urgency=low
702 * add freetts as a build dep
703 * move to science menu
704 * working on java packaging details
706 -- Bdale Garbee <bdale@gag.com> Wed, 11 Aug 2010 22:11:28 -0400
708 altos (0.6+292+g8fc261c) unstable; urgency=low
710 * see if my new freetts package works
712 -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
714 altos (0.6+290+g7877496) unstable; urgency=low
717 * altosui: check for closed serial device before reading
718 * altosui: Remove unnecessary freetts .jar files
719 * altosui: Close serial, join reader thread, free altos_file
720 * altosui: remove debug printf
721 * libaltos: build with java src encoding UTF8
722 * altosui: construct Darwin application directory
723 * Add Mac OS X packaging bits
724 * altosui: Switch eeprom extension back to .eeprom
725 * Moved Mac OS packaging to altosui dir
726 * altosui: remove option to install to alternate volume
727 * Make altosui test script executable
729 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
731 altos (0.6+277+gd184819) unstable; urgency=low
734 * fix text since TM only has one led to blink
735 * add swig as a build dep
736 * add a jdk to the build deps
739 * When the EP0 IN buffer is full, don't panic, just skip sending
741 * Add libaltos which talks to USB connected altos devices
742 * Switch AltosUI to libaltos for device access
743 * Present list of altos devices in nice format
745 * Re-enable Linux support for altosui.
746 * Darwin doesn't have strndup.
747 * libaltos needs -I. on all systems
748 * libaltos: make clean remove all built files
749 * libaltos: build fat 10.5-compatible library
750 * Add Mac OS X packaging files for altosui
751 * Add application icons for Mac OS X
752 * Clean up altosui build a bit
753 * Remove directories as .class file dependencies; it makes them get
755 * Java clean ups -- use varargs where possible, remove
757 * Java voice reporting cleanups.
758 * Force java source encoding to UTF-8
759 * Make ao_log_data re-entrant as it is used for both sensor and GPS
761 * altosui: Catch errors opening USB devices. Limit list to relevant
763 * Make voice and channel menus work.
764 * Add voice test command for help in adjusting volume.
765 * Remove debug printf
766 * altosui: Add eeprom data capture function. No UI yet.
767 * altosui: Add progress bar for eeprom downloading status
768 * altosui: Fix Save flight data monitor layout, add cancel
769 * altosui: Replace device dialog. Center eeprom monitor.
770 * altosui: report rocket ground bearing at landing only if known
771 * Reset GPS ready status when GPS comes unlocked on the pad
773 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
775 altos (0.6+236+gcd8aa79) unstable; urgency=low
778 * Telemetry code was mis-computing RSSI
779 * Switch DBG pins to GPIO when using any debug commands. Reboot to
783 * significant documentation update
784 * add build dep for sndfile
785 * reflect documentation file name change
786 * update to latest Debian standards version
788 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
790 altos (0.6+224+g4766b13) unstable; urgency=low
793 * documentation updates from Bob
796 * Extension to KML output format, and minor bug fix
799 * ao-view: disable radio telemetry monitoring during channel change
800 * Add special code for USB panic's.
801 * ao-postflight: was walking off state.data array
802 * Abort any in-progress radio operation when changing radio channel
804 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
806 altos (0.6+214+g16c4cae) unstable; urgency=low
809 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
810 * merge a derivative of Bob Finch's mere mortals guide as getting started
811 * merge the altusmetrum-themes package
814 * Fix telemetrum.inf, tested by Adrian and Keithp
815 * Finish basic flight monitoring UI with voice using FreeTTS
817 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
819 altos (0.6+204+g6bd8513) unstable; urgency=low
821 * lose the quotes since they apparently aren't necessary
823 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
825 altos (0.6+202+gae6854d) unstable; urgency=low
827 * update desktop file for conformance with current standards
829 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
831 altos (0.6+200+g68eaaa6) unstable; urgency=low
833 * add initial package build scripts for Arch Linux from Bob Finch
834 * add desktop file provided by Bob Finch
836 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
838 altos (0.6+195+gcde60f1) unstable; urgency=low
840 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
842 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
844 altos (0.6+193+g314d27a) unstable; urgency=low
847 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
849 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
851 altos (0.6+190+g8b6767e) unstable; urgency=low
854 * Fix all stdio reading functions to be __critical
855 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
857 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
859 altos (0.6+187+g8702f49) unstable; urgency=low
862 * more text created during SFO->DEN flight
863 * initial attempt at a telemetrum turn on script .. needs work
866 * Revert "Add optional 's' command to packet slave to enable/disable
868 * Disable interrupts while reading from stdin
870 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
872 altos (0.6+180+g99094f0) unstable; urgency=low
875 * Increase reset switch time to 100ms
876 * Add optional 's' command to packet slave to enable/disable slave
878 * More ALtosUI changes
879 * Autodetect flite voice registration function
882 * capture work done on SFO->DEN flight
883 * add some RF usage information from an email reply sent today, and
886 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
888 altos (0.6+171+g9394393) unstable; urgency=low
894 * Only have the slave return a packet if it received one.
896 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
898 altos (0.6+168+gc0ee1ae) unstable; urgency=low
901 * INSTALL file changed by auto tools
904 * libflite may forget to reference libasound
906 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
908 altos (0.6+164+g5c3b6e2) unstable; urgency=low
911 * Start adding java-based UI
912 * Add telemetry data parsing code
913 * Add Windows install .inf file
914 * Fix windows install file
915 * Add telem parsing code
916 * Steal C code from ao-view
917 * Display table of flight info. gps is not working yet though
918 * Fix up table formatting
921 * Clean up GPS data formatting
922 * Report current gps nsat, not last locked nsat
923 * Remove GPS data missing from skytraq. Save max height/accel/speed
924 * Remove unused cell renderer class
926 * Use RXTX for serial comm. Add logdir preference saving
927 * Make ao_radio_idle keep trying to get the radio to idle.
928 * Don't abort the radio when enabling telemetry monitoring
929 * Clean up some altosui comments
930 * Switch TeleMetrum from v0.2 to v1.0
931 * Add Linux device discovery
932 * Interrupt running replay thread when starting another replay
933 * serial port read function cannot be interrupted. poll every 1 second
934 * TD reports "not-connected" when GPS has 0 sats
935 * Tasks may move in task structure as a result of ao_exit
936 * Enable telemetry monitoring
937 * Use 16-bit flite voice (which appears to have changed symbols
939 * When changing RESET line, delay 20ms
942 * choose a better set of docbook xsl files
944 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
946 altos (0.6+131+g6629ec5) unstable; urgency=low
948 * lose the url entirely for now
950 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
952 altos (0.6+129+g934434f) unstable; urgency=low
956 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
958 altos (0.6+127+g05ad583) unstable; urgency=low
960 * need another build dep
962 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
964 altos (0.6+125+g8f1d47e) unstable; urgency=low
967 * tweak copyright assertion
968 * crudely incorporate "day in the life" info from web page
969 * rewrite urls in docbook format
971 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
973 altos (0.6+119+g00f49c8) unstable; urgency=low
976 * update changelogs for Debian build
977 * move gbp.conf into debian/
978 * initial harness for documentation
982 * Round radio calibration value instead of truncating
983 * Document the ao-dumplog '--remote' flag for radio-link downloads
985 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
987 altos (0.6+108+g6e61170) unstable; urgency=low
990 * Need to duplicate new altitude conversion code in aoview.
992 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
994 altos (0.6+106+ga1478f6) unstable; urgency=low
997 * Add ao_radio_xmit to help test boards without flashing them.
998 * Allow product names to have suffixes (like board revisions)
999 * Fix and document the ao-rawload --run flag
1001 * Leave .ihx files in the build directory too - easier to debug that way
1002 * Eliminate deadlock when writing config from radio link
1003 * Fix up LED colors for each product.
1004 * Add .gitignore for ao-bringup
1007 * create a turn on script for lighting up TeleDongle v0.2 boards
1009 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
1011 altos (0.6+95+g2f45953) unstable; urgency=low
1013 * update changelogs for Debian build
1014 * conditionalize use of git on executability of /usr/bin/git binary
1016 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
1018 altos (0.6+88+gdeccc10) unstable; urgency=low
1020 * add gawk as a build dependency since strtonum is a gawk extension
1022 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
1024 altos (0.6+86+g2491282) unstable; urgency=low
1027 * Disable monitor mode before attempting radio test.
1028 * Ensure that ao_alarm waits at least the specified time
1029 * Remove dbg driver code from telemetrum/teledongle
1030 * Add AT45DBxx1D driver
1031 * Remove green LED and temp sensor from v0.2 code
1032 * Add at45db161d.h header file for new flash part.
1033 * Add 'f' command to display flash status register contents
1034 * Dump more flash parameters for the flash_status command
1035 * Dump config block from read/write config and flash_status commands
1036 * Don't set ao_flash_setup_done until we're actually done.
1037 * Remove flash debugging printfs
1038 * Add simple gps dump command 'g'
1039 * Force idle mode by shorting the SPI clock to ground at boot time.
1040 * Switch to using internal cc1111 temperature sensor
1041 * Missing ao_mutex_put in gps_dump
1042 * Compute daytime using GPS as time base
1043 * Pull in a bit more data for filtering the start of the boost
1044 * Log GPS data on pad after boost detect.
1045 * Change barometer conversion code to shrink conversion table
1046 * Change altos build process to support per-product compile-time
1048 * Update .gitignore files
1049 * Quiet make output.
1050 * Add back stack size checking to altos linking phase
1051 * Must install .map files for ao-load to work
1053 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
1055 altos (0.6+60+g10d1bbc) unstable; urgency=low
1058 * Use ao_radio_get/ao_radio_put in packet code.
1060 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
1062 altos (0.6+58+gbbb152c) unstable; urgency=low
1065 * Re-order config values. Change frequency to cal
1066 * Allow radio calibration to be set from ao-load
1067 * Add --cal to man page
1069 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
1071 altos (0.6+53+gcd49847) unstable; urgency=low
1074 * Remove send_serial and serial_baud commands.
1075 * Make ao_cmd_decimal produce both 32 and 16 bit values.
1076 * Add radio calibration configuration.
1078 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
1080 altos (0.6+49+g9a1d7dd) unstable; urgency=low
1083 * Change default callsign to "N0CALL"
1085 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
1087 altos (0.6+47+g4053309) unstable; urgency=low
1089 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
1090 * change home URL in control file to be the AltOS page
1092 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
1094 altos (0.6+43+gd6ba07e) unstable; urgency=low
1097 * Decode HDOP data from skytraq GPS
1098 * Document ao-postflight --gps and --kml options.
1099 * Make ao-postflight create filenames using input filenames.
1100 * Make TD print 0000-00-00 for invalid dates.
1101 * Fix --plot arg handling. Add -all option.
1102 * Convert telemetry file GPS satellite information in cc_log_read
1103 * Don't crash if --plot isn't passed on ao-postflight command line
1104 * ao-postflight: compute barometric alt for each GPS position
1105 * ao-postflight: don't try to use missing gps sat data
1106 * Automatically extract flight number for eeprom and telem filenames.
1108 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
1110 altos (0.6+32+g87e6f3e) unstable; urgency=low
1113 * fix typo in comment
1116 * Reduce igniter firing time from 500ms to 50ms.
1117 * Add GPS date/time output to ao-postflight.
1118 * Eliminate SiRF state values from ao-view.
1120 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
1122 altos (0.6+27+gb0d7e3f) unstable; urgency=low
1125 * Add two-point accelerometer calibration.
1126 * Remove "l" command as ao-dumplong no longer uses it
1127 * Remove "d" command
1128 * Remove "f" command
1129 * Reformat ADC values to show all 16 bits
1130 * ao_flight_test was using accel value for pressure too
1131 * Pass accel calibration over telemetry stream. Telemetry data format
1133 * Add ability to dump eeprom data over radio link.
1134 * In packet master, move USB flush from packet thread to echo thread
1135 * In USB pollchar, wait for packet before re-checking USB out len
1136 * Explicitly use USB I/O routines in packet code
1137 * Flush pending input when switching to remote packet mode
1138 * Stop recording in ao-dumplog after receiving an invalid block
1139 * Move ao_match_word from ao_ignite.c to ao_cmd.c
1140 * Add Watchdog Timer Control register definitions
1141 * Add reboot command.
1142 * Return radio to telemetry settings when packet system closed.
1143 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
1144 * Loosen tolerances for main->landed transition
1145 * Provide a dummy 'uninstall' target in the src directory.
1146 * Share telemetry parsing code in cc library.
1147 * Enable telemetry receive in ao_view
1148 * Switch order of serial/flight in ao-postflight summary
1149 * Add flight number to telemetry stream.
1150 * Add date to GPS data, captured from GPRMC packet.
1151 * Stop using SiRF state info.
1153 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
1155 altos (0.6) unstable; urgency=low
1158 * Add support for the SkyTraq GPS unit
1159 * Build two versions of TM, one for SiRF, one for SkyTraq
1160 * Save some DSEG space by marking cmd functions __reentrant
1161 * Add ao_wake_task and ao_exit
1162 * Add keyhole-markup generation for ao-postflight.
1163 * Initial packet bits. Just testing transmission
1164 * Add radio carrier command
1165 * Wait for TX to finish sending data
1167 * Remove reason from ao_dma_abort
1168 * Switch packet code from timer thread to ao_alarm
1169 * Use ao_radio_done to wait for TX to completely finish with packet
1170 * Send SYN packet to set sequence numbers
1172 * Do more flushing in packet test code
1173 * Use ao_alarm for ao_delay so it can be easily interrupted
1174 * Poke master to speed up packet rate when things are busy
1175 * No need to wakeup &ao_tick_count now
1176 * Enable packet-based communcation to command processor
1177 * Add more docs to the README file
1178 * Disable interrupts while removing tasks from task list
1179 * Add ao_usb_pollchar to ao.h
1181 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
1183 altos (0.5+90+g127c312) unstable; urgency=low
1185 * de-version the libreadline-dev build dependency
1187 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
1189 altos (0.5+86+g2de548f) unstable; urgency=low
1191 * automate push of updated and tagged master branch during
1192 debian/rules prebuild
1193 * flush repetitive junk out of debian/changelog, and update the
1195 * add support for tagging git repository on each Debian package build
1197 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
1199 altos (0.5+77+gc57bd7f) unstable; urgency=low
1201 * build for Debian from git
1203 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600