Imported Debian patch 1.5-16
[debian/pax] / tables.h
1 /*      $OpenBSD: tables.h,v 1.2 1996/06/23 14:20:43 deraadt Exp $      */
2 /*      $NetBSD: tables.h,v 1.3 1995/03/21 09:07:47 cgd Exp $   */
3
4 /*-
5  * Copyright (c) 1992 Keith Muller.
6  * Copyright (c) 1992, 1993
7  *      The Regents of the University of California.  All rights reserved.
8  *
9  * This code is derived from software contributed to Berkeley by
10  * Keith Muller of the University of California, San Diego.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions and the following disclaimer.
17  * 2. Redistributions in binary form must reproduce the above copyright
18  *    notice, this list of conditions and the following disclaimer in the
19  *    documentation and/or other materials provided with the distribution.
20  * 3. All advertising materials mentioning features or use of this software
21  *    must display the following acknowledgement:
22  *      This product includes software developed by the University of
23  *      California, Berkeley and its contributors.
24  * 4. Neither the name of the University nor the names of its contributors
25  *    may be used to endorse or promote products derived from this software
26  *    without specific prior written permission.
27  *
28  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
29  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
30  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
31  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
32  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
34  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
36  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
37  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38  * SUCH DAMAGE.
39  *
40  *      @(#)tables.h    8.1 (Berkeley) 5/31/93
41  */
42
43 /*
44  * data structures and constants used by the different databases kept by pax
45  */
46
47 /*
48  * Hash Table Sizes MUST BE PRIME, if set too small performance suffers.
49  * Probably safe to expect 500000 inodes per tape. Assuming good key
50  * distribution (inodes) chains of under 50 long (worse case) is ok.
51  */
52 #define L_TAB_SZ        2503            /* hard link hash table size */
53 #define F_TAB_SZ        50503           /* file time hash table size */
54 #define N_TAB_SZ        541             /* interactive rename hash table */
55 #define D_TAB_SZ        317             /* unique device mapping table */
56 #define A_TAB_SZ        317             /* ftree dir access time reset table */
57 #define MAXKEYLEN       64              /* max number of chars for hash */
58
59 /*
60  * file hard link structure (hashed by dev/ino and chained) used to find the
61  * hard links in a file system or with some archive formats (cpio)
62  */
63 typedef struct hrdlnk {
64         char            *name;  /* name of first file seen with this ino/dev */
65         dev_t           dev;    /* files device number */
66         ino_t           ino;    /* files inode number */
67         u_long          nlink;  /* expected link count */
68         struct hrdlnk   *fow;
69 } HRDLNK;
70
71 /*
72  * Archive write update file time table (the -u, -C flag), hashed by filename.
73  * Filenames are stored in a scratch file at seek offset into the file. The
74  * file time (mod time) and the file name length (for a quick check) are
75  * stored in a hash table node. We were forced to use a scratch file because
76  * with -u, the mtime for every node in the archive must always be available
77  * to compare against (and this data can get REALLY large with big archives).
78  * By being careful to read only when we have a good chance of a match, the
79  * performance loss is not measurable (and the size of the archive we can
80  * handle is greatly increased).
81  */
82 typedef struct ftm {
83         int             namelen;        /* file name length */
84         time_t          mtime;          /* files last modification time */
85         off_t           seek;           /* loacation in scratch file */
86         struct ftm      *fow;
87 } FTM;
88
89 /*
90  * Interactive rename table (-i flag), hashed by orig filename.
91  * We assume this will not be a large table as this mapping data can only be
92  * obtained through interactive input by the user. Nobody is going to type in
93  * changes for 500000 files? We use chaining to resolve collisions.
94  */
95
96 typedef struct namt {
97         char            *oname;         /* old name */
98         char            *nname;         /* new name typed in by the user */
99         struct namt     *fow;
100 } NAMT;
101
102 /*
103  * Unique device mapping tables. Some protocols (e.g. cpio) require that the
104  * <c_dev,c_ino> pair will uniquely identify a file in an archive unless they
105  * are links to the same file. Appending to archives can break this. For those
106  * protocols that have this requirement we map c_dev to a unique value not seen
107  * in the archive when we append. We also try to handle inode truncation with
108  * this table. (When the inode field in the archive header are too small, we
109  * remap the dev on writes to remove accidental collisions).
110  *
111  * The list is hashed by device number using chain collision resolution. Off of 
112  * each DEVT are linked the various remaps for this device based on those bits
113  * in the inode which were truncated. For example if we are just remapping to
114  * avoid a device number during an update append, off the DEVT we would have
115  * only a single DLIST that has a truncation id of 0 (no inode bits were
116  * stripped for this device so far). When we spot inode truncation we create
117  * a new mapping based on the set of bits in the inode which were stripped off.
118  * so if the top four bits of the inode are stripped and they have a pattern of
119  * 0110...... (where . are those bits not truncated) we would have a mapping
120  * assigned for all inodes that has the same 0110.... pattern (with this dev
121  * number of course). This keeps the mapping sparse and should be able to store
122  * close to the limit of files which can be represented by the optimal
123  * combination of dev and inode bits, and without creating a fouled up archive.
124  * Note we also remap truncated devs in the same way (an exercise for the
125  * dedicated reader; always wanted to say that...:)
126  */
127
128 typedef struct devt {
129         dev_t           dev;    /* the orig device number we now have to map */
130         struct devt     *fow;   /* new device map list */
131         struct dlist    *list;  /* map list based on inode truncation bits */
132 } DEVT;
133
134 typedef struct dlist {
135         ino_t trunc_bits;       /* truncation pattern for a specific map */
136         dev_t dev;              /* the new device id we use */
137         struct dlist *fow;
138 } DLIST;
139
140 /*
141  * ftree directory access time reset table. When we are done with with a
142  * subtree we reset the access and mod time of the directory when the tflag is
143  * set. Not really explicitly specified in the pax spec, but easy and fast to
144  * do (and this may have even been intended in the spec, it is not clear).
145  * table is hashed by inode with chaining.
146  */
147
148 typedef struct atdir {
149         char *name;     /* name of directory to reset */
150         dev_t dev;      /* dev and inode for fast lookup */
151         ino_t ino;
152         time_t mtime;   /* access and mod time to reset to */
153         time_t atime;
154         struct atdir *fow;
155 } ATDIR;
156
157 /*
158  * created directory time and mode storage entry. After pax is finished during
159  * extraction or copy, we must reset directory access modes and times that
160  * may have been modified after creation (they no longer have the specified
161  * times and/or modes). We must reset time in the reverse order of creation,
162  * because entries are added  from the top of the file tree to the bottom.
163  * We MUST reset times from leaf to root (it will not work the other
164  * direction).  Entries are recorded into a spool file to make reverse
165  * reading faster.
166  */
167
168 typedef struct dirdata {
169         int nlen;       /* length of the directory name (includes \0) */
170         off_t npos;     /* position in file where this dir name starts */
171         mode_t mode;    /* file mode to restore */
172         time_t mtime;   /* mtime to set */
173         time_t atime;   /* atime to set */
174         int frc_mode;   /* do we force mode settings? */
175 } DIRDATA;