2016-07-10 |
Bdale Garbee | pieces copied in, no conflicts, needs net name work |
commit | commitdiff | tree | snapshot |
2016-07-01 |
Bdale Garbee | add two holes with trace that can be cut for off-board... |
commit | commitdiff | tree | snapshot |
2016-01-07 |
Bdale Garbee | the edge-launch SMA should be a noload! |
commit | commitdiff | tree | snapshot |
2015-10-29 |
Bdale Garbee | hide all refdes in the silk so we can print silk both... fab-v1.0-201512 |
commit | commitdiff | tree | snapshot |
2015-10-29 |
Bdale Garbee | mark SMA as handload, not noload |
commit | commitdiff | tree | snapshot |
2015-10-14 |
Bdale Garbee | elide part attributes now to be taken from preferred... |
commit | commitdiff | tree | snapshot |
2015-10-14 |
Bdale Garbee | tweak attribs file for data extraction to preferred... |
commit | commitdiff | tree | snapshot |
2015-10-14 |
Bdale Garbee | regularize metadata for common preferred parts list |
commit | commitdiff | tree | snapshot |
2015-10-13 |
Bdale Garbee | move to use of common Makefile |
commit | commitdiff | tree | snapshot |
2015-10-13 |
Bdale Garbee | fix attribute visibility so pdf output sucks less |
commit | commitdiff | tree | snapshot |
2015-10-13 |
Bdale Garbee | include license in the project dir |
commit | commitdiff | tree | snapshot |
2015-09-29 |
Keith Packard | Add manufacturer part numbers and testing bits to Makefile |
commit | commitdiff | tree | snapshot |
2014-04-11 |
Bdale Garbee | mark through-hole parts as no-load .. connector out... fab-v1.0 |
commit | commitdiff | tree | snapshot |
2014-04-11 |
Bdale Garbee | update attributes to reflect current part availability |
commit | commitdiff | tree | snapshot |
2014-04-11 |
Bdale Garbee | don't include top silk, it's just a mess |
commit | commitdiff | tree | snapshot |
2014-04-11 |
Bdale Garbee | lots of copper tweaking for manufacturability |
commit | commitdiff | tree | snapshot |
2014-03-18 |
Bdale Garbee | fixed all issues raised by freedfm that we don't expect... |
commit | commitdiff | tree | snapshot |
2014-03-18 |
Bdale Garbee | update attributes, clean up some copper nasties |
commit | commitdiff | tree | snapshot |
2014-03-14 |
Bdale Garbee | fix layer grouping to match our normal stack |
commit | commitdiff | tree | snapshot |
2014-03-14 |
Bdale Garbee | move divider far away from mounting screws |
commit | commitdiff | tree | snapshot |
2014-03-14 |
Bdale Garbee | roll versions to 1.0, copyrights to 2014 |
commit | commitdiff | tree | snapshot |
2014-03-14 |
Bdale Garbee | add ability to measure LiPo voltage |
commit | commitdiff | tree | snapshot |
2014-03-01 |
Bdale Garbee | move to standardized makefile |
commit | commitdiff | tree | snapshot |
2013-11-25 |
Keith Packard | Move refdes around on the silk |
commit | commitdiff | tree | snapshot |
2013-11-24 |
Keith Packard | Load and save with newer version of pcb |
commit | commitdiff | tree | snapshot |
2013-11-24 |
Bdale Garbee | add more silk |
commit | commitdiff | tree | snapshot |
2013-11-24 |
Bdale Garbee | move to smaller debug connector, add company name to... |
commit | commitdiff | tree | snapshot |
2013-11-24 |
Keith Packard | Shrink debug connector holes |
commit | commitdiff | tree | snapshot |
2013-11-24 |
Bdale Garbee | remove out-of-date bom notes from original design |
commit | commitdiff | tree | snapshot |
2013-11-24 |
Bdale Garbee | lose local symbols directory cruft |
commit | commitdiff | tree | snapshot |
2013-11-24 |
Bdale Garbee | update layout to use SOIJ8 memory footprint, lots of... |
commit | commitdiff | tree | snapshot |
2013-11-24 |
Bdale Garbee | change flash part out for our standard SOIJ8 footprint... |
commit | commitdiff | tree | snapshot |
2013-11-23 |
Bdale Garbee | route complete and DRC clean |
commit | commitdiff | tree | snapshot |
2013-11-23 |
Bdale Garbee | working on plane back from PVR |
commit | commitdiff | tree | snapshot |
2013-11-16 |
Bdale Garbee | change to right angle, through-hole, LiPo connector |
commit | commitdiff | tree | snapshot |
2013-08-09 |
Bdale Garbee | add stencil target to the Makefile |
commit | commitdiff | tree | snapshot |
2013-08-09 |
Bdale Garbee | hack passive patch footprint to solve DRC issues with... minimal fab-phoenix |
commit | commitdiff | tree | snapshot |
2013-08-04 |
Keith Packard | Switch to title-D. Use Panasonic resistors. |
commit | commitdiff | tree | snapshot |
2013-07-08 |
Keith Packard | Clean up GPS RF input routing |
commit | commitdiff | tree | snapshot |
2013-07-07 |
Keith Packard | Add SAW filter to GPS input |
commit | commitdiff | tree | snapshot |
2013-07-03 |
Keith Packard | Tie USB pull-up to pin 16 (pio0_7) |
commit | commitdiff | tree | snapshot |
2013-07-02 |
Keith Packard | Fix flash USON footprint (was mirrored) |
commit | commitdiff | tree | snapshot |
2013-06-18 |
Keith Packard | Adjust GPS antenna trace to avoid width changes |
commit | commitdiff | tree | snapshot |
2013-06-13 |
Keith Packard | Switch GPS patch to Taoglas GP.1575.18.4.A.02 |
commit | commitdiff | tree | snapshot |
2013-06-07 |
Keith Packard | Layout PCB for minimal TeleGPS version |
commit | commitdiff | tree | snapshot |
2013-06-06 |
Keith Packard | A completely minimal design |
commit | commitdiff | tree | snapshot |
2013-06-05 |
Keith Packard | Eliminate PA |
commit | commitdiff | tree | snapshot |
2013-05-01 |
Keith Packard | Update DK numbers to use currently available parts |
commit | commitdiff | tree | snapshot |
2013-04-24 |
Keith Packard | Fix CC115L DCOUPL cap value - should be 0.1uF, not... |
commit | commitdiff | tree | snapshot |
2013-04-11 |
Keith Packard | Open up clearance around STM ground VIAs to 6mils re-plan fab-v0.2 |
commit | commitdiff | tree | snapshot |
2013-04-02 |
Keith Packard | Fix for 6/6 trace/space rules |
commit | commitdiff | tree | snapshot |
2013-04-02 |
Keith Packard | Layout new power filtering bits |
commit | commitdiff | tree | snapshot |
2013-04-02 |
Keith Packard | Create a wedge for the GPS RF connection |
commit | commitdiff | tree | snapshot |
2013-04-02 |
Keith Packard | Add RF filter before LDO. Add 470pF for GPS battery... |
commit | commitdiff | tree | snapshot |
2013-04-02 |
Keith Packard | Add bypass and RFI cap to SD. Move SD E. |
commit | commitdiff | tree | snapshot |
2013-04-01 |
Keith Packard | Re-work the floor plan. |
commit | commitdiff | tree | snapshot |
2013-03-31 |
Keith Packard | Fix solder mask around GPS antenna pads |
commit | commitdiff | tree | snapshot |
2013-03-31 |
Keith Packard | Move GPS chip to align RF input with antenna. Change... |
commit | commitdiff | tree | snapshot |
2013-03-31 |
Keith Packard | Add 0-ohm resistor in the reset_n line to the GPS chip |
commit | commitdiff | tree | snapshot |
2013-03-31 |
Keith Packard | Remove the 'fullpoly' flag. Add some ground floods. |
commit | commitdiff | tree | snapshot |
2013-03-30 |
Keith Packard | Clean up a few routes |
commit | commitdiff | tree | snapshot |
2013-03-30 |
Keith Packard | Clean up generation of gerb files |
commit | commitdiff | tree | snapshot |
2013-03-30 |
Keith Packard | Replace Skytraq GPS with U-Blox |
commit | commitdiff | tree | snapshot |
2013-03-26 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git... |
commit | commitdiff | tree | snapshot |
2013-03-26 |
Bdale Garbee | move all datasheets to the altusmetrum shared repo |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Keith Packard | Shrink silk text for element labels. Shuffle around. |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Keith Packard | Shuffle text around a bit |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Keith Packard | Add status LED to PCB. Shrink VIA clearance to 6.00mil |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Keith Packard | Add status LED |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Keith Packard | Move packages to altusmetrum shared repo |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Keith Packard | Switch to altusmetrum component directory |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Keith Packard | Move components away from cc115 corners |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Keith Packard | Eliminate top ground flood under GPS chip |
commit | commitdiff | tree | snapshot |
2013-01-27 |
Keith Packard | Clean up ground flood on top |
commit | commitdiff | tree | snapshot |
2013-01-15 |
Keith Packard | Fix clean target to remove more stuff |
commit | commitdiff | tree | snapshot |
2013-01-15 |
Keith Packard | Use shared altusmetrum scheme files |
commit | commitdiff | tree | snapshot |
2013-01-08 |
Keith Packard | Add DK numbers for SMA and a couple of caps |
commit | commitdiff | tree | snapshot |
2013-01-08 |
Bdale Garbee | add pn for power switch screw terminals |
commit | commitdiff | tree | snapshot |
2013-01-08 |
Bdale Garbee | select inductors |
commit | commitdiff | tree | snapshot |
2013-01-06 |
Bdale Garbee | add stencil target |
commit | commitdiff | tree | snapshot |
2013-01-01 |
Bdale Garbee | add DK part number for GPS antenna |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | Un-short gnd and gps_gnd fab-v0.1 |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | Nice big serial number patch |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | Move top ground plane away from USB cut-out |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | Ick. Little top ground plane glitch |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | More top ground plane changes |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | Shove swdio trace right |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | Re-flood the top |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Bdale Garbee | drc clean |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Bdale Garbee | switch to screw terminal power connector, place it... |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | Move U7 label to someplace visible |
commit | commitdiff | tree | snapshot |
2012-12-31 |
Keith Packard | Move power switch between SD and debug connectors |
commit | commitdiff | tree | snapshot |
2012-12-30 |
Keith Packard | Flip debug connector around |
commit | commitdiff | tree | snapshot |
2012-12-30 |
Keith Packard | Add serial port for optional telemetry input |
commit | commitdiff | tree | snapshot |
2012-12-29 |
Bdale Garbee | fix stm footprint via to plane clearance issue |
commit | commitdiff | tree | snapshot |
2012-12-28 |
Keith Packard | Fix filenames to make oshpark happy |
commit | commitdiff | tree | snapshot |
2012-12-28 |
Keith Packard | Move U7 label into a reasonable place |
commit | commitdiff | tree | snapshot |
2012-12-28 |
Keith Packard | Export gerber files with 'eagle' names. Add copyright... |
commit | commitdiff | tree | snapshot |
2012-12-28 |
Keith Packard | Add a couple of missing packages to git |
commit | commitdiff | tree | snapshot |
2012-12-28 |
Keith Packard | Update schematic and PCB to include STM-48 QFP pad |
commit | commitdiff | tree | snapshot |
next |