| 2015-01-30 |
Bdale Garbee | add prototyping targets to Makefile |
commit | commitdiff | tree | snapshot |
| 2015-01-05 |
Bdale Garbee | lose the refdes for the mounting holes, too fab-2.0 oshpark-2.0 |
commit | commitdiff | tree | snapshot |
| 2015-01-05 |
Bdale Garbee | add oshpark target to Makefile, lose refdes from the... |
commit | commitdiff | tree | snapshot |
| 2015-01-05 |
Bdale Garbee | we moved to shared symbol library a while back .. clean... |
commit | commitdiff | tree | snapshot |
| 2015-01-05 |
Bdale Garbee | route complete, drc clean |
commit | commitdiff | tree | snapshot |
| 2014-12-31 |
Bdale Garbee | more work on placement, pin swaps to improve routing |
commit | commitdiff | tree | snapshot |
| 2014-12-30 |
Bdale Garbee | fix BTM-182 pin 32 |
commit | commitdiff | tree | snapshot |
| 2014-12-30 |
Bdale Garbee | old traces cleaned up, silk updated to reflect version... |
commit | commitdiff | tree | snapshot |
| 2014-12-30 |
Bdale Garbee | add power and ground plane polygons |
commit | commitdiff | tree | snapshot |
| 2014-12-30 |
Bdale Garbee | expand working area to hold new parts, ran 'make pcb' |
commit | commitdiff | tree | snapshot |
| 2014-12-30 |
Bdale Garbee | move PCB to TeleMega-compatible 4-layer stack |
commit | commitdiff | tree | snapshot |
| 2014-12-30 |
Bdale Garbee | TeleBT v1.1 PCB layout, flipped with help from DJ's... |
commit | commitdiff | tree | snapshot |
| 2014-12-29 |
Bdale Garbee | lose the wire whip not, it's not relevant here |
commit | commitdiff | tree | snapshot |
| 2014-12-28 |
Bdale Garbee | move to updated cc1200 symbol, clean up some trace... |
commit | commitdiff | tree | snapshot |
| 2014-12-28 |
Bdale Garbee | flesh out remaining explicit NCs, etc |
commit | commitdiff | tree | snapshot |
| 2014-12-28 |
Bdale Garbee | more progress on artwork |
commit | commitdiff | tree | snapshot |
| 2014-12-28 |
Bdale Garbee | work in progress |
commit | commitdiff | tree | snapshot |
| 2014-12-28 |
Bdale Garbee | working on v2.0 |
commit | commitdiff | tree | snapshot |
| 2014-12-28 |
Bdale Garbee | update to use merged meta files |
commit | commitdiff | tree | snapshot |
| 2013-07-28 |
Bdale Garbee | a couple more copper tweaks fab-1.1 |
commit | commitdiff | tree | snapshot |
| 2013-07-19 |
Bdale Garbee | merge Rayson datasheets to shared repo, elide the rest |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Bdale Garbee | update Notebook file |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Bdale Garbee | update pcb to reflect removal of flash part from design |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Keith Packard | Remove partslist.dk and partslist.mouser with 'make... |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Keith Packard | Merge branch 'master' of ssh://git.gag.com/scm/git... |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Keith Packard | Reroute debug traces |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Keith Packard | Add partslist.dk and partslist.mouser generation to... |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Bdale Garbee | lose the flash part entirely, since we don't load it |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Keith Packard | Remove trailing whitespace on vendor part numbers |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Bdale Garbee | update version to 1.1 |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Bdale Garbee | route complete, no drc errors, kind of ugly around... |
commit | commitdiff | tree | snapshot |
| 2013-07-11 |
Bdale Garbee | rotate debug and companion connectors for proper cable... |
commit | commitdiff | tree | snapshot |
| 2013-03-01 |
Bdale Garbee | fix cut'n'paste error in R5 part number caught by AC... v1.0 |
commit | commitdiff | tree | snapshot |
| 2013-02-27 |
Bdale Garbee | move switch inboard 75 mils, clean up a few resulting... fab-v1.0 |
commit | commitdiff | tree | snapshot |
| 2013-02-27 |
Bdale Garbee | lose the beeper |
commit | commitdiff | tree | snapshot |
| 2013-02-27 |
Bdale Garbee | make FreeDFM happy by expanding guide pin annular ring... |
commit | commitdiff | tree | snapshot |
| 2013-02-27 |
Bdale Garbee | no locking ears on companion connector, Mouser has... |
commit | commitdiff | tree | snapshot |
| 2013-02-27 |
Bdale Garbee | more parts substitutions after checking Digi-Key stock... |
commit | commitdiff | tree | snapshot |
| 2013-02-27 |
Bdale Garbee | update parts selections to reflect current stock and... |
commit | commitdiff | tree | snapshot |
| 2013-02-25 |
Bdale Garbee | change version from 0.3 to 1.0, update copyright year... |
commit | commitdiff | tree | snapshot |
| 2013-02-07 |
Bdale Garbee | conn-6.sys no longer relevant |
commit | commitdiff | tree | snapshot |
| 2013-02-07 |
Bdale Garbee | move to use of shared scheme directory |
commit | commitdiff | tree | snapshot |
| 2013-02-07 |
Bdale Garbee | mark beeper and flash memory as noload for production... |
commit | commitdiff | tree | snapshot |
| 2012-12-19 |
Bdale Garbee | update loadstatus attributes for LDO bypass cap and... |
commit | commitdiff | tree | snapshot |
| 2012-12-11 |
Bdale Garbee | move to local copy of partslistgag script |
commit | commitdiff | tree | snapshot |
| 2012-10-30 |
Bdale Garbee | more make goodness |
commit | commitdiff | tree | snapshot |
| 2012-09-29 |
Bdale Garbee | move to a slight variation on my new SMA edge connector... fab-v0.3 |
commit | commitdiff | tree | snapshot |
| 2012-09-29 |
Bdale Garbee | change to W25Q64 8-megabyte flash part |
commit | commitdiff | tree | snapshot |
| 2012-03-22 |
Bdale Garbee | shove the power switch in a few more mils, minor tweaks |
commit | commitdiff | tree | snapshot |
| 2012-03-22 |
Bdale Garbee | move to 3.00 volt version of the reset controller |
commit | commitdiff | tree | snapshot |
| 2012-03-11 |
Bdale Garbee | more symbols |
commit | commitdiff | tree | snapshot |
| 2012-03-11 |
Bdale Garbee | fix schematic version |
commit | commitdiff | tree | snapshot |
| 2012-03-11 |
Bdale Garbee | let pcb rewrite the file after hacking the plane extent... |
commit | commitdiff | tree | snapshot |
| 2012-03-11 |
Bdale Garbee | major rework .. better battery charger, lots of copper... |
commit | commitdiff | tree | snapshot |
| 2011-10-12 |
Bdale Garbee | lose the disconnected cs1 notation on the companion... |
commit | commitdiff | tree | snapshot |
| 2011-10-12 |
Bdale Garbee | back vs bottom |
commit | commitdiff | tree | snapshot |
| 2011-09-13 |
Bdale Garbee | add symbol for switch |
commit | commitdiff | tree | snapshot |
| 2011-09-13 |
Bdale Garbee | add Altus Metrum graphic to silk v0.2 fab-v0.2 |
commit | commitdiff | tree | snapshot |
| 2011-09-12 |
Bdale Garbee | widen the SMA notch so that we more more flexibility... |
commit | commitdiff | tree | snapshot |
| 2011-09-12 |
Bdale Garbee | turn solder paste off on SMA footprint since it's added... |
commit | commitdiff | tree | snapshot |
| 2011-09-12 |
Bdale Garbee | fix errant boundary line |
commit | commitdiff | tree | snapshot |
| 2011-07-02 |
Bdale Garbee | another ground plane improvement |
commit | commitdiff | tree | snapshot |
| 2011-07-02 |
Bdale Garbee | much cleaning up of copper, no more traces breaking... |
commit | commitdiff | tree | snapshot |
| 2011-07-02 |
Bdale Garbee | route complete, no drc errors |
commit | commitdiff | tree | snapshot |
| 2011-07-02 |
Bdale Garbee | we don't need the pull-up resistors on the serial lines |
commit | commitdiff | tree | snapshot |
| 2011-07-01 |
Bdale Garbee | snapshot work to date .. not quite fully routed, not... |
commit | commitdiff | tree | snapshot |
| 2011-06-11 |
Bdale Garbee | shove parts around to get the switch set back suitably... |
commit | commitdiff | tree | snapshot |
| 2011-06-10 |
Bdale Garbee | strip silkscreen from the USB micro B connector, and... |
commit | commitdiff | tree | snapshot |
| 2011-06-08 |
Bdale Garbee | notch the board edge to account for SMA bulkhead thickness |
commit | commitdiff | tree | snapshot |
| 2011-06-07 |
Bdale Garbee | initial work on a rotated placement .. lots still to do |
commit | commitdiff | tree | snapshot |
| 2011-05-11 |
Bdale Garbee | fix the led net name to match the blue led color |
commit | commitdiff | tree | snapshot |
| 2011-04-26 |
Bdale Garbee | tweak board dimensions down to match outline fab-v0.1 |
commit | commitdiff | tree | snapshot |
| 2011-04-22 |
Bdale Garbee | meet minimum silk line dimension on beeper circle |
commit | commitdiff | tree | snapshot |
| 2011-04-22 |
Bdale Garbee | fix soldermask clearance on sma footprint |
commit | commitdiff | tree | snapshot |
| 2011-04-22 |
Bdale Garbee | meet min annular ring dimension spec on mounting holes... |
commit | commitdiff | tree | snapshot |
| 2011-04-21 |
Bdale Garbee | fix targets so make zip works |
commit | commitdiff | tree | snapshot |
| 2011-04-21 |
Bdale Garbee | connect a spare cc1111 pin to the open pin on the compa... |
commit | commitdiff | tree | snapshot |
| 2011-04-21 |
Bdale Garbee | add TP2 attached to v_usb so we can experiment with... |
commit | commitdiff | tree | snapshot |
| 2011-04-21 |
Bdale Garbee | cts and rts need to be cross-connected between the... |
commit | commitdiff | tree | snapshot |
| 2011-04-19 |
Bdale Garbee | mark the serial pullups as noload, keithp says they... |
commit | commitdiff | tree | snapshot |
| 2011-04-18 |
Bdale Garbee | move bt_link to correct pin as per keithp feedback |
commit | commitdiff | tree | snapshot |
| 2011-04-18 |
Bdale Garbee | improvements in ground plane continuity, better spacing... |
commit | commitdiff | tree | snapshot |
| 2011-04-18 |
Bdale Garbee | fix beeper interference with sma |
commit | commitdiff | tree | snapshot |
| 2011-04-18 |
Bdale Garbee | resolve switch / sma interference issue by moving switc... |
commit | commitdiff | tree | snapshot |
| 2011-04-18 |
Bdale Garbee | route complete, drc clean, added the usual silkscreen... |
commit | commitdiff | tree | snapshot |
| 2011-04-16 |
Bdale Garbee | pull ground plane back away from BT antenna, work more... |
commit | commitdiff | tree | snapshot |
| 2011-04-14 |
Bdale Garbee | adjust placement to account for pcb dimension reduction |
commit | commitdiff | tree | snapshot |
| 2011-04-14 |
Bdale Garbee | shave 50 mils off SMA end of PCB to allow for SMA flang... |
commit | commitdiff | tree | snapshot |
| 2011-04-12 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
| 2011-04-12 |
Bdale Garbee | working on placement |
commit | commitdiff | tree | snapshot |
| 2011-04-12 |
Bdale Garbee | connect both VDD pins on BT module, add a second bypass... |
commit | commitdiff | tree | snapshot |
| 2011-04-12 |
Bdale Garbee | add beeper |
commit | commitdiff | tree | snapshot |
| 2011-04-10 |
Bdale Garbee | pcb syncronized with schematic, all parts on board... |
commit | commitdiff | tree | snapshot |
| 2011-04-10 |
Bdale Garbee | move the "ground plane" to the "top" of the board since... |
commit | commitdiff | tree | snapshot |
| 2011-04-10 |
Bdale Garbee | fix hole size in schematic to match 1551K mounting... |
commit | commitdiff | tree | snapshot |
| 2011-04-10 |
Bdale Garbee | lock the outline, the bottom poly and boundary vestigal... |
commit | commitdiff | tree | snapshot |
| 2011-04-10 |
Bdale Garbee | expand bottom poly to full board size, then clone outli... |
commit | commitdiff | tree | snapshot |
| 2011-04-10 |
Bdale Garbee | holes moved to the right places for maximum size 1551K... |
commit | commitdiff | tree | snapshot |
| 2011-04-10 |
Bdale Garbee | outline now matches Hammond max PCB size for 1551K box |
commit | commitdiff | tree | snapshot |
| 2011-04-09 |
Bdale Garbee | Outline and hole positions right for board that is... |
commit | commitdiff | tree | snapshot |
| next |
projects / hw / telebt / shortlog