| 2013-05-15 |
Bdale Garbee | simplify reset connections to u-blox GPS receiver
|
commit | commitdiff | tree |
| 2013-05-07 |
Bdale Garbee | fill in missing part atributes for v0.3 load
|
commit | commitdiff | tree |
| 2013-05-07 |
Bdale Garbee | lose the muffin pdf during a clean
|
commit | commitdiff | tree |
| 2013-04-23 |
Bdale Garbee | add muffin label generation, clean up some attributes
|
commit | commitdiff | tree |
| 2013-04-22 |
Bdale Garbee | rename MegaMetrum to TeleMega
|
commit | commitdiff | tree |
| 2013-03-26 |
Bdale Garbee | add a series resistor in the reset line to the GPS...
|
commit | commitdiff | tree |
| 2013-03-22 |
Bdale Garbee | route complete, drc clean
|
commit | commitdiff | tree |
| 2013-03-21 |
Bdale Garbee | update to include new pyro circuit .. placement done...
|
commit | commitdiff | tree |
| 2013-03-20 |
Bdale Garbee | prepare for overlay of new pyro circuit
|
commit | commitdiff | tree |
| 2013-03-18 |
Bdale Garbee | move to altusmetrum symbols
|
commit | commitdiff | tree |
| 2013-03-15 |
Bdale Garbee | added usb resistors, route complete and drc clean
|
commit | commitdiff | tree |
| 2013-03-15 |
Bdale Garbee | route complete
|
commit | commitdiff | tree |
| 2013-03-02 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2013-02-24 |
Bdale Garbee | reworking layout after taking passive patch off
|
commit | commitdiff | tree |
| 2013-02-24 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2013-02-23 |
Bdale Garbee | connect mag sensor to stm
|
commit | commitdiff | tree |
| 2013-02-23 |
Bdale Garbee | add the magnetic sensor back to the board
|
commit | commitdiff | tree |
| 2013-02-23 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2013-02-18 |
Bdale Garbee | mid-route on the updated FET parts
|
commit | commitdiff | tree |
| 2013-02-18 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2013-02-18 |
Bdale Garbee | move from FDS9926A to Si7232DN dual FETs
|
commit | commitdiff | tree |
| 2013-02-18 |
Bdale Garbee | rotated GPS chip and rerouted to get more separation...
|
commit | commitdiff | tree |
| 2013-02-18 |
Bdale Garbee | lose the snubbers on the baro sensor
|
commit | commitdiff | tree |
| 2013-02-17 |
Bdale Garbee | tweak thermals on bottom layer
|
commit | commitdiff | tree |
| 2013-02-17 |
Bdale Garbee | move to u-box max-6 with both passive and active patch...
|
commit | commitdiff | tree |
| 2013-02-16 |
Bdale Garbee | first cut at moving to u-blox max-6 GPS
|
commit | commitdiff | tree |
| 2013-01-21 |
Bdale Garbee | move data sheets to common repo
|
commit | commitdiff | tree |
| 2013-01-15 |
Bdale Garbee | move to common scheme library
|
commit | commitdiff | tree |
| 2013-01-06 |
Bdale Garbee | add stencil target
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | oops, fix trailing dorkbot reference
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | add oshpark target to Makefile
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | one last rat ghost eliminated
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | improve routing of v_charge
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | clean up UHF traces
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | improve plane integrity
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | update schematic copyright date, too
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | update copyright assertion to 2013
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | pull board size back down to the outline
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | clean up copper floods around SMA
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | update to new SMA footprint
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | clean up some silk issues, etc
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | route complete, drc clean
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | after restoring from save file
|
commit | commitdiff | tree |
| 2013-01-01 |
Bdale Garbee | snapshot before recovering from save file
|
commit | commitdiff | tree |
| 2012-12-31 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git...
|
commit | commitdiff | tree |
| 2012-12-31 |
Bdale Garbee | shoved some parts around, lots more routing work
|
commit | commitdiff | tree |
| 2012-12-24 |
Bdale Garbee | tech note on CC112X temperature sensor
|
commit | commitdiff | tree |
| 2012-12-18 |
Bdale Garbee | add silk square to mark 17E GPS patch location
|
commit | commitdiff | tree |
| 2012-12-18 |
Bdale Garbee | tweak visible silk
|
commit | commitdiff | tree |
| 2012-12-18 |
Bdale Garbee | major elements of placement for v0.2 worked out .....
|
commit | commitdiff | tree |
| 2012-12-17 |
Bdale Garbee | rename GPS groundplane to be less ambiguous
|
commit | commitdiff | tree |
| 2012-12-17 |
Bdale Garbee | elide passive antenna and associated tuning cap from...
|
commit | commitdiff | tree |
| 2012-12-17 |
Bdale Garbee | snapshot before massive copper rework
|
commit | commitdiff | tree |
| 2012-12-17 |
Bdale Garbee | put the flash back on spi2, along with the cc1120 and...
|
commit | commitdiff | tree |
| 2012-12-16 |
Bdale Garbee | add radio_marc_isr so we can prevent radio TX underruns...
|
commit | commitdiff | tree |
| 2012-12-11 |
Bdale Garbee | move parts list creator to local directory
|
commit | commitdiff | tree |
| 2012-12-09 |
Bdale Garbee | move flash to spi1
|
commit | commitdiff | tree |
| 2012-12-08 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git...
|
commit | commitdiff | tree |
| 2012-12-08 |
Bdale Garbee | change GPS DC bias inductor to 47nH to lower SRF so...
|
commit | commitdiff | tree |
| 2012-10-30 |
Bdale Garbee | snapshot pcb work to date
|
commit | commitdiff | tree |
| 2012-10-12 |
Bdale Garbee | restore MMA6556 to design now that we've located some...
|
commit | commitdiff | tree |
| 2012-10-12 |
Bdale Garbee | fix numslots in CC1120 symbol
|
commit | commitdiff | tree |
| 2012-10-12 |
Bdale Garbee | fix typo in PD4 label
|
commit | commitdiff | tree |
| 2012-10-12 |
Bdale Garbee | remove the analog accel, we're moving back to the Freescale...
|
commit | commitdiff | tree |
| 2012-07-15 |
Bdale Garbee | add SPI snubbers .. 3 full sets!
|
commit | commitdiff | tree |
| 2012-07-04 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2012-07-01 |
Bdale Garbee | add u-blox MAX-6Q GPS module documents
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | update SPI net names to be more "conventional"
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | lots of work cleaning up defunct copper and working...
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | fixed the schematic, I think
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | replace big debug connector with 4-pin stlinkv2 and...
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | move interrupts to lower port pin numbers
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | merge analog accelerometer circuit from megaaccel daughter...
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | move MPU6000 to SPI1 normal pins
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | elide MMA6556 since it's unobtainium
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | move MPU6000 from I2C to SPI
|
commit | commitdiff | tree |
| 2012-06-28 |
Bdale Garbee | elide the magnetic sensor
|
commit | commitdiff | tree |
| 2012-06-17 |
Bdale Garbee | add datasheet on CC1111 FEC implementation
|
commit | commitdiff | tree |
| 2012-06-13 |
Bdale Garbee | move Vlcd to 3.3V instead of the analog rail
|
commit | commitdiff | tree |
| 2012-06-01 |
Bdale Garbee | major update to TI user manual for the cc112x, et al
|
commit | commitdiff | tree |
| 2012-05-17 |
Bdale Garbee | add data sheets for Analog Devices accelerometers ala...
|
commit | commitdiff | tree |
| 2012-04-19 |
Bdale Garbee | lose the USB pull-up, there's one internal to the SOC
|
commit | commitdiff | tree |
| 2012-04-19 |
Bdale Garbee | rename STM32L151 symbol to prepare for also using 48...
|
commit | commitdiff | tree |
| 2012-03-31 |
Bdale Garbee | data sheets associated with Olimex JTAG interface used...
|
commit | commitdiff | tree |
| 2012-03-31 |
Bdale Garbee | a couple attribute cleanups, label file for printing...
|
commit | commitdiff | tree |
| 2012-03-10 |
Bdale Garbee | more data sheets
|
commit | commitdiff | tree |
| 2012-03-10 |
Bdale Garbee | move cap around the corner to get more standoff clearance
|
commit | commitdiff | tree |
| 2012-03-10 |
Bdale Garbee | make it easier to attach sensing wires with another via
|
commit | commitdiff | tree |
| 2012-03-10 |
Bdale Garbee | add a current measuring resistor in the LDO output net
|
commit | commitdiff | tree |
| 2012-03-06 |
Bdale Garbee | improve copper around GPS antenna center pin
|
commit | commitdiff | tree |
| 2012-03-06 |
Bdale Garbee | make ground thermals on screw terminals and battery...
|
commit | commitdiff | tree |
| 2012-03-06 |
Bdale Garbee | forward-annotate R13 value change to pcb file
|
commit | commitdiff | tree |
| 2012-03-06 |
Bdale Garbee | fix R13 value in schematic
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | add polarity indicators on lipo connector in silk
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | set nopaste on SMA pads, some copper shoving
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | fix product name in the .pcb file, and hide all reference...
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | fixes motivated by freedfm run
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | improve silk legibility
|
commit | commitdiff | tree |
| 2012-03-03 |
Bdale Garbee | drop to 16 pin longer connector
|
commit | commitdiff | tree |
| next |
projects / hw / telemega / search