| 2022-12-12 |
Bdale Garbee | replace lga16 footprint with "correct" version, address... master debian/4.1.0-3 fab-v6.0-corrected |
commit | commitdiff | tree | snapshot |
| 2022-10-28 |
Bdale Garbee | drop two dangling copper fragments found by AC quality... fab-v6.0 |
commit | commitdiff | tree | snapshot |
| 2022-09-16 |
Bdale Garbee | address drc concerns |
commit | commitdiff | tree | snapshot |
| 2022-09-16 |
Bdale Garbee | fix DRC errors .. a no-longer used pin and a couple... |
commit | commitdiff | tree | snapshot |
| 2022-08-29 |
Bdale Garbee | a few more tweaks? |
commit | commitdiff | tree | snapshot |
| 2022-08-24 |
Bdale Garbee | switch to LM193QT comparators since we can get them... |
commit | commitdiff | tree | snapshot |
| 2022-07-27 |
Bdale Garbee | route complete, no drc/dfm work yet |
commit | commitdiff | tree | snapshot |
| 2022-07-26 |
Bdale Garbee | working on layout update |
commit | commitdiff | tree | snapshot |
| 2022-07-26 |
Bdale Garbee | update schematics for TeleMega v6.0 |
commit | commitdiff | tree | snapshot |
| 2021-10-28 |
Bdale Garbee | declare version 6.0 in schematic, move back to TDK... |
commit | commitdiff | tree | snapshot |
| 2021-09-01 |
Bdale Garbee | clean up schematics before releasing pdf |
commit | commitdiff | tree | snapshot |
| 2021-07-20 |
Bdale Garbee | mark new beeper as noload, since we'll do it here fab-v5.0 |
commit | commitdiff | tree | snapshot |
| 2021-07-15 |
Bdale Garbee | move beeper to tim 3 ch 2 so code is easier |
commit | commitdiff | tree | snapshot |
| 2021-07-15 |
Bdale Garbee | replace missing vcc via in radio section. route comple... |
commit | commitdiff | tree | snapshot |
| 2021-07-14 |
Bdale Garbee | route complete, drc clean, copper stared at .. ready... |
commit | commitdiff | tree | snapshot |
| 2021-07-13 |
Bdale Garbee | still working on it .. a few pin swaps, moved v_batt... |
commit | commitdiff | tree | snapshot |
| 2021-07-13 |
Bdale Garbee | reduce via size to 10 mils everywhere |
commit | commitdiff | tree | snapshot |
| 2021-07-13 |
Bdale Garbee | change all 10 mil traces to 8 mil |
commit | commitdiff | tree | snapshot |
| 2021-07-13 |
Bdale Garbee | snapshot work in progress |
commit | commitdiff | tree | snapshot |
| 2021-07-12 |
Bdale Garbee | note pin limits based on SOC mix we plan to use for v5 |
commit | commitdiff | tree | snapshot |
| 2021-07-08 |
Bdale Garbee | rip up a lot of the copper under the SOC, could use... |
commit | commitdiff | tree | snapshot |
| 2021-07-08 |
Bdale Garbee | move GPS from serial 3 to serial 2 to ease routing |
commit | commitdiff | tree | snapshot |
| 2021-06-12 |
Bdale Garbee | initial cleanup of board for v5 |
commit | commitdiff | tree | snapshot |
| 2021-06-12 |
Bdale Garbee | working schematic for TeleMega v5.0 |
commit | commitdiff | tree | snapshot |
| 2021-06-12 |
Bdale Garbee | assert specific STM32L151 variant in use |
commit | commitdiff | tree | snapshot |
| 2021-06-12 |
Keith Packard | Switch to 2kHz beeper |
commit | commitdiff | tree | snapshot |
| 2021-06-12 |
Bdale Garbee | first cut at schematic for TeleMega v5.0 |
commit | commitdiff | tree | snapshot |
| 2020-11-11 |
Bdale Garbee | remove spurious, unconnected 0402 footprint v4 |
commit | commitdiff | tree | snapshot |
| 2020-09-18 |
Bdale Garbee | rationalize screw strip part value in pref parts |
commit | commitdiff | tree | snapshot |
| 2020-05-18 |
Bdale Garbee | let attribs be automatically handled |
commit | commitdiff | tree | snapshot |
| 2020-02-20 |
Bdale Garbee | metadata updates fab-v4.0 |
commit | commitdiff | tree | snapshot |
| 2020-01-08 |
Bdale Garbee | add copper to power-plane around USB connector slots... |
commit | commitdiff | tree | snapshot |
| 2020-01-08 |
Bdale Garbee | switch to cc1200 symbol on schematic to avoid confusion |
commit | commitdiff | tree | snapshot |
| 2020-01-08 |
Bdale Garbee | update comment on GPS backup current limiting resistor |
commit | commitdiff | tree | snapshot |
| 2020-01-06 |
Bdale Garbee | give adxl375 a set of spi1 pins to itself |
commit | commitdiff | tree | snapshot |
| 2020-01-06 |
Bdale Garbee | update copyrights to 2020 |
commit | commitdiff | tree | snapshot |
| 2019-12-12 |
Bdale Garbee | add outline features defining USB connector mounting... |
commit | commitdiff | tree | snapshot |
| 2019-11-29 |
Bdale Garbee | lose BOOT* pull-down resistors, switch to MAX-8Q GPS |
commit | commitdiff | tree | snapshot |
| 2019-11-14 |
Bdale Garbee | initial layout with BMX160 completed |
commit | commitdiff | tree | snapshot |
| 2019-09-25 |
Bdale Garbee | move to BMX160 IMU due to EOL on the 9250 |
commit | commitdiff | tree | snapshot |
| 2019-08-16 |
Bdale Garbee | rotate ADXL375 to match EasyMega orientation |
commit | commitdiff | tree | snapshot |
| 2019-07-28 |
Keith Packard | Switch pyro series resistors to 1k |
commit | commitdiff | tree | snapshot |
| 2019-07-11 |
Bdale Garbee | re-brand as version 4.0, update copyright year |
commit | commitdiff | tree | snapshot |
| 2019-01-15 |
Bdale Garbee | update layout to use new usb connector |
commit | commitdiff | tree | snapshot |
| 2019-01-15 |
Bdale Garbee | move to 11071 USB connector |
commit | commitdiff | tree | snapshot |
| 2019-01-15 |
Bdale Garbee | transition to lepton-eda and pcb-rnd |
commit | commitdiff | tree | snapshot |
| 2019-01-15 |
Bdale Garbee | include mfg in attribs |
commit | commitdiff | tree | snapshot |
| 2019-01-15 |
Bdale Garbee | Merge remote-tracking branch 'origin/separate-accel... |
commit | commitdiff | tree | snapshot |
| 2018-04-19 |
Bdale Garbee | Merge commit 'ea4cbfb' |
commit | commitdiff | tree | snapshot |
| 2018-04-01 |
Bdale Garbee | drop lipo charge current to 400mA |
commit | commitdiff | tree | snapshot |
| 2018-03-01 |
Keith Packard | Use separate SoC pin for ADXL375 MOSI separate-accel-mosi |
commit | commitdiff | tree | snapshot |
| 2018-02-26 |
Bdale Garbee | route complete, drc clean |
commit | commitdiff | tree | snapshot |
| 2018-02-25 |
Bdale Garbee | swap accel interrupt lines at ARM SOC to ease routing |
commit | commitdiff | tree | snapshot |
| 2018-02-25 |
Bdale Garbee | we actually need to provide power to both accel power... |
commit | commitdiff | tree | snapshot |
| 2018-02-25 |
Bdale Garbee | update schematic to use ADXL375 as high-g accel |
commit | commitdiff | tree | snapshot |
| 2017-11-10 |
Bdale Garbee | move to Keith's ufqfpn24 footprint for MPU9250 fab-v3.0 |
commit | commitdiff | tree | snapshot |
| 2017-11-10 |
Bdale Garbee | replace 9250 footprint with corrected version |
commit | commitdiff | tree | snapshot |
| 2017-10-12 |
Bdale Garbee | lose the gps_pps net, ground IMU's FSYNC pin instead |
commit | commitdiff | tree | snapshot |
| 2017-10-12 |
Bdale Garbee | new version of pcb updated the file |
commit | commitdiff | tree | snapshot |
| 2016-11-04 |
Bdale Garbee | updated artwork for prototype of v3.0 |
commit | commitdiff | tree | snapshot |
| 2016-11-04 |
Bdale Garbee | replace MPU-6000 and HMC5883L with MPU-9250 for v3.0 |
commit | commitdiff | tree | snapshot |
| 2016-10-18 |
Bdale Garbee | lose 'provided' attributes, let pref parts database... |
commit | commitdiff | tree | snapshot |
| 2016-01-11 |
Bdale Garbee | meta-data updates for v2.0 build fab-v2.0 |
commit | commitdiff | tree | snapshot |
| 2015-11-26 |
Bdale Garbee | reduce pcb workspace size to board outline again, make... |
commit | commitdiff | tree | snapshot |
| 2015-11-15 |
Bdale Garbee | hide refdes associated with (new) servos connector |
commit | commitdiff | tree | snapshot |
| 2015-11-15 |
Bdale Garbee | mark loadstatus invisible on all parts |
commit | commitdiff | tree | snapshot |
| 2015-11-14 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git... |
commit | commitdiff | tree | snapshot |
| 2015-11-13 |
Keith Packard | Forward component changes from sch to pcb |
commit | commitdiff | tree | snapshot |
| 2015-10-29 |
Bdale Garbee | elide remaining refdes from silk |
commit | commitdiff | tree | snapshot |
| 2015-10-25 |
Bdale Garbee | move to CC1200 and 40mhz rock, fix some attributes |
commit | commitdiff | tree | snapshot |
| 2015-10-25 |
Bdale Garbee | move to use of preferred parts database |
commit | commitdiff | tree | snapshot |
| 2015-09-20 |
Bdale Garbee | add explicit NC symbols to unconnected pins on schemati... |
commit | commitdiff | tree | snapshot |
| 2015-09-20 |
Bdale Garbee | re-map cs_companionN pins to match EasyMega, allows... |
commit | commitdiff | tree | snapshot |
| 2015-09-20 |
Bdale Garbee | elide dangling uart1 pin connections on soc |
commit | commitdiff | tree | snapshot |
| 2015-08-18 |
Bdale Garbee | forward annotate value changes to PCB fab-v1.1 |
commit | commitdiff | tree | snapshot |
| 2015-08-18 |
Bdale Garbee | conventional wisdom appears to be 220 ohms on the PWM... |
commit | commitdiff | tree | snapshot |
| 2015-08-17 |
Bdale Garbee | use locking connector for servo PWM outputs |
commit | commitdiff | tree | snapshot |
| 2015-08-17 |
Bdale Garbee | lose the spi2 snubbers we've never used, replace serial... |
commit | commitdiff | tree | snapshot |
| 2014-10-27 |
Bdale Garbee | fix DRC violation following LED symbol replacement fab-v1.0b |
commit | commitdiff | tree | snapshot |
| 2014-10-26 |
Keith Packard | Switch to mouse for LM293QT |
commit | commitdiff | tree | snapshot |
| 2014-10-26 |
Bdale Garbee | update layout to use dual LED footprint with cathode... |
commit | commitdiff | tree | snapshot |
| 2014-10-26 |
Bdale Garbee | fix 4ucon part number |
commit | commitdiff | tree | snapshot |
| 2014-01-16 |
Bdale Garbee | add support for generating pdf files |
commit | commitdiff | tree | snapshot |
| 2014-01-16 |
Bdale Garbee | move to 4ucon connectors |
commit | commitdiff | tree | snapshot |
| 2013-12-19 |
Bdale Garbee | lose the "pad" in the GPS patch footprint |
commit | commitdiff | tree | snapshot |
| 2013-11-08 |
Bdale Garbee | answer to question from AC |
commit | commitdiff | tree | snapshot |
| 2013-10-24 |
Bdale Garbee | updated Makefile to include dk and mouser targets, etc fab-v1.0 |
commit | commitdiff | tree | snapshot |
| 2013-10-24 |
Bdale Garbee | update attributes to reflect available part stock at DK |
commit | commitdiff | tree | snapshot |
| 2013-10-24 |
Bdale Garbee | noload the screw terminal strips (coming from 4ucon... |
commit | commitdiff | tree | snapshot |
| 2013-10-24 |
Bdale Garbee | hide all refdes to keep the silk from being a mess |
commit | commitdiff | tree | snapshot |
| 2013-10-24 |
Bdale Garbee | move LED resistor farther from SW corner mounting screw... |
commit | commitdiff | tree | snapshot |
| 2013-10-24 |
Keith Packard | Component updates for availability |
commit | commitdiff | tree | snapshot |
| 2013-10-24 |
Bdale Garbee | fix LM293 part number at DK to one we can actually buy |
commit | commitdiff | tree | snapshot |
| 2013-10-24 |
Bdale Garbee | elide snubbers on SPI 1, minor via shoving to improve... |
commit | commitdiff | tree | snapshot |
| 2013-10-11 |
Bdale Garbee | more clearance between v_ldo_in and the screw in the... |
commit | commitdiff | tree | snapshot |
| 2013-10-11 |
Bdale Garbee | new cap size for LDO input |
commit | commitdiff | tree | snapshot |
| 2013-10-11 |
Bdale Garbee | change to smaller physical part for the LDO input cap |
commit | commitdiff | tree | snapshot |
| 2013-10-06 |
Bdale Garbee | Merge branch 'passive' |
commit | commitdiff | tree | snapshot |
| 2013-10-06 |
Bdale Garbee | Merge branch 'passive' |
commit | commitdiff | tree | snapshot |
| 2013-09-14 |
Bdale Garbee | get the pyro circuit resistor values right passive |
commit | commitdiff | tree | snapshot |
| next |
projects / hw / telemega / shortlog