| 2021-07-13 |
Bdale Garbee | change all 10 mil traces to 8 mil
|
commit | commitdiff | tree |
| 2021-07-13 |
Bdale Garbee | snapshot work in progress
|
commit | commitdiff | tree |
| 2021-07-12 |
Bdale Garbee | note pin limits based on SOC mix we plan to use for v5
|
commit | commitdiff | tree |
| 2021-07-08 |
Bdale Garbee | rip up a lot of the copper under the SOC, could use...
|
commit | commitdiff | tree |
| 2021-07-08 |
Bdale Garbee | move GPS from serial 3 to serial 2 to ease routing
|
commit | commitdiff | tree |
| 2021-06-12 |
Bdale Garbee | initial cleanup of board for v5
|
commit | commitdiff | tree |
| 2021-06-12 |
Bdale Garbee | working schematic for TeleMega v5.0
|
commit | commitdiff | tree |
| 2021-06-12 |
Bdale Garbee | assert specific STM32L151 variant in use
|
commit | commitdiff | tree |
| 2021-06-12 |
Bdale Garbee | first cut at schematic for TeleMega v5.0
|
commit | commitdiff | tree |
| 2020-11-11 |
Bdale Garbee | remove spurious, unconnected 0402 footprint
|
commit | commitdiff | tree |
| 2020-09-18 |
Bdale Garbee | rationalize screw strip part value in pref parts
|
commit | commitdiff | tree |
| 2020-05-18 |
Bdale Garbee | let attribs be automatically handled
|
commit | commitdiff | tree |
| 2020-02-20 |
Bdale Garbee | metadata updates
|
commit | commitdiff | tree |
| 2020-01-08 |
Bdale Garbee | add copper to power-plane around USB connector slots...
|
commit | commitdiff | tree |
| 2020-01-08 |
Bdale Garbee | switch to cc1200 symbol on schematic to avoid confusion
|
commit | commitdiff | tree |
| 2020-01-08 |
Bdale Garbee | update comment on GPS backup current limiting resistor
|
commit | commitdiff | tree |
| 2020-01-06 |
Bdale Garbee | give adxl375 a set of spi1 pins to itself
|
commit | commitdiff | tree |
| 2020-01-06 |
Bdale Garbee | update copyrights to 2020
|
commit | commitdiff | tree |
| 2019-12-12 |
Bdale Garbee | add outline features defining USB connector mounting...
|
commit | commitdiff | tree |
| 2019-11-29 |
Bdale Garbee | lose BOOT* pull-down resistors, switch to MAX-8Q GPS
|
commit | commitdiff | tree |
| 2019-11-14 |
Bdale Garbee | initial layout with BMX160 completed
|
commit | commitdiff | tree |
| 2019-09-25 |
Bdale Garbee | move to BMX160 IMU due to EOL on the 9250
|
commit | commitdiff | tree |
| 2019-08-16 |
Bdale Garbee | rotate ADXL375 to match EasyMega orientation
|
commit | commitdiff | tree |
| 2019-07-11 |
Bdale Garbee | re-brand as version 4.0, update copyright year
|
commit | commitdiff | tree |
| 2019-01-15 |
Bdale Garbee | update layout to use new usb connector
|
commit | commitdiff | tree |
| 2019-01-15 |
Bdale Garbee | move to 11071 USB connector
|
commit | commitdiff | tree |
| 2019-01-15 |
Bdale Garbee | transition to lepton-eda and pcb-rnd
|
commit | commitdiff | tree |
| 2019-01-15 |
Bdale Garbee | include mfg in attribs
|
commit | commitdiff | tree |
| 2019-01-15 |
Bdale Garbee | Merge remote-tracking branch 'origin/separate-accel...
|
commit | commitdiff | tree |
| 2018-04-19 |
Bdale Garbee | Merge commit 'ea4cbfb'
|
commit | commitdiff | tree |
| 2018-04-01 |
Bdale Garbee | drop lipo charge current to 400mA
|
commit | commitdiff | tree |
| 2018-02-26 |
Bdale Garbee | route complete, drc clean
|
commit | commitdiff | tree |
| 2018-02-25 |
Bdale Garbee | swap accel interrupt lines at ARM SOC to ease routing
|
commit | commitdiff | tree |
| 2018-02-25 |
Bdale Garbee | we actually need to provide power to both accel power...
|
commit | commitdiff | tree |
| 2018-02-25 |
Bdale Garbee | update schematic to use ADXL375 as high-g accel
|
commit | commitdiff | tree |
| 2017-11-10 |
Bdale Garbee | move to Keith's ufqfpn24 footprint for MPU9250
|
commit | commitdiff | tree |
| 2017-11-10 |
Bdale Garbee | replace 9250 footprint with corrected version
|
commit | commitdiff | tree |
| 2017-10-12 |
Bdale Garbee | lose the gps_pps net, ground IMU's FSYNC pin instead
|
commit | commitdiff | tree |
| 2017-10-12 |
Bdale Garbee | new version of pcb updated the file
|
commit | commitdiff | tree |
| 2016-11-04 |
Bdale Garbee | updated artwork for prototype of v3.0
|
commit | commitdiff | tree |
| 2016-11-04 |
Bdale Garbee | replace MPU-6000 and HMC5883L with MPU-9250 for v3.0
|
commit | commitdiff | tree |
| 2016-10-18 |
Bdale Garbee | lose 'provided' attributes, let pref parts database...
|
commit | commitdiff | tree |
| 2016-01-11 |
Bdale Garbee | meta-data updates for v2.0 build
|
commit | commitdiff | tree |
| 2015-11-26 |
Bdale Garbee | reduce pcb workspace size to board outline again, make...
|
commit | commitdiff | tree |
| 2015-11-15 |
Bdale Garbee | hide refdes associated with (new) servos connector
|
commit | commitdiff | tree |
| 2015-11-15 |
Bdale Garbee | mark loadstatus invisible on all parts
|
commit | commitdiff | tree |
| 2015-11-14 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git...
|
commit | commitdiff | tree |
| 2015-10-29 |
Bdale Garbee | elide remaining refdes from silk
|
commit | commitdiff | tree |
| 2015-10-25 |
Bdale Garbee | move to CC1200 and 40mhz rock, fix some attributes
|
commit | commitdiff | tree |
| 2015-10-25 |
Bdale Garbee | move to use of preferred parts database
|
commit | commitdiff | tree |
| 2015-09-20 |
Bdale Garbee | add explicit NC symbols to unconnected pins on schematic...
|
commit | commitdiff | tree |
| 2015-09-20 |
Bdale Garbee | re-map cs_companionN pins to match EasyMega, allows...
|
commit | commitdiff | tree |
| 2015-09-20 |
Bdale Garbee | elide dangling uart1 pin connections on soc
|
commit | commitdiff | tree |
| 2015-08-18 |
Bdale Garbee | forward annotate value changes to PCB
|
commit | commitdiff | tree |
| 2015-08-18 |
Bdale Garbee | conventional wisdom appears to be 220 ohms on the PWM...
|
commit | commitdiff | tree |
| 2015-08-17 |
Bdale Garbee | use locking connector for servo PWM outputs
|
commit | commitdiff | tree |
| 2015-08-17 |
Bdale Garbee | lose the spi2 snubbers we've never used, replace serial...
|
commit | commitdiff | tree |
| 2014-10-27 |
Bdale Garbee | fix DRC violation following LED symbol replacement
|
commit | commitdiff | tree |
| 2014-10-26 |
Bdale Garbee | update layout to use dual LED footprint with cathode...
|
commit | commitdiff | tree |
| 2014-10-26 |
Bdale Garbee | fix 4ucon part number
|
commit | commitdiff | tree |
| 2014-01-16 |
Bdale Garbee | add support for generating pdf files
|
commit | commitdiff | tree |
| 2014-01-16 |
Bdale Garbee | move to 4ucon connectors
|
commit | commitdiff | tree |
| 2013-12-19 |
Bdale Garbee | lose the "pad" in the GPS patch footprint
|
commit | commitdiff | tree |
| 2013-11-08 |
Bdale Garbee | answer to question from AC
|
commit | commitdiff | tree |
| 2013-10-24 |
Bdale Garbee | updated Makefile to include dk and mouser targets, etc
|
commit | commitdiff | tree |
| 2013-10-24 |
Bdale Garbee | update attributes to reflect available part stock at DK
|
commit | commitdiff | tree |
| 2013-10-24 |
Bdale Garbee | noload the screw terminal strips (coming from 4ucon...
|
commit | commitdiff | tree |
| 2013-10-24 |
Bdale Garbee | hide all refdes to keep the silk from being a mess
|
commit | commitdiff | tree |
| 2013-10-24 |
Bdale Garbee | move LED resistor farther from SW corner mounting screw...
|
commit | commitdiff | tree |
| 2013-10-24 |
Bdale Garbee | fix LM293 part number at DK to one we can actually buy
|
commit | commitdiff | tree |
| 2013-10-24 |
Bdale Garbee | elide snubbers on SPI 1, minor via shoving to improve...
|
commit | commitdiff | tree |
| 2013-10-11 |
Bdale Garbee | more clearance between v_ldo_in and the screw in the...
|
commit | commitdiff | tree |
| 2013-10-11 |
Bdale Garbee | new cap size for LDO input
|
commit | commitdiff | tree |
| 2013-10-11 |
Bdale Garbee | change to smaller physical part for the LDO input cap
|
commit | commitdiff | tree |
| 2013-10-06 |
Bdale Garbee | Merge branch 'passive'
|
commit | commitdiff | tree |
| 2013-10-06 |
Bdale Garbee | Merge branch 'passive'
|
commit | commitdiff | tree |
| 2013-09-14 |
Bdale Garbee | get the pyro circuit resistor values right
|
commit | commitdiff | tree |
| 2013-08-09 |
Bdale Garbee | copper tweaking
|
commit | commitdiff | tree |
| 2013-08-09 |
Bdale Garbee | clean up some copper issues
|
commit | commitdiff | tree |
| 2013-08-04 |
Bdale Garbee | CPU is much cheaper at Avnet than at DK
|
commit | commitdiff | tree |
| 2013-08-04 |
Bdale Garbee | CPU is much cheaper at Avnet than at DK
|
commit | commitdiff | tree |
| 2013-08-04 |
Bdale Garbee | route complete, passes DRC
|
commit | commitdiff | tree |
| 2013-08-04 |
Bdale Garbee | change version to 0.4 P for passive GPS antenna option
|
commit | commitdiff | tree |
| 2013-08-04 |
Bdale Garbee | change version to 0.4 A for active GPS antenna option
|
commit | commitdiff | tree |
| 2013-07-09 |
Bdale Garbee | initial placement of saw filter and passive patch
|
commit | commitdiff | tree |
| 2013-07-09 |
Bdale Garbee | not sure what changed
|
commit | commitdiff | tree |
| 2013-05-16 |
Bdale Garbee | use 1k for all the LED current limits, eliminates a...
|
commit | commitdiff | tree |
| 2013-05-16 |
Bdale Garbee | regularize resistor attributes to use Panasonic 0.1W...
|
commit | commitdiff | tree |
| 2013-05-16 |
Bdale Garbee | change FET gate series resistors to 549 ohms
|
commit | commitdiff | tree |
| 2013-05-15 |
Bdale Garbee | forward-annotate resistor value changes, etc
|
commit | commitdiff | tree |
| 2013-05-15 |
Bdale Garbee | simplify reset connections to u-blox GPS receiver
|
commit | commitdiff | tree |
| 2013-05-07 |
Bdale Garbee | fill in missing part atributes for v0.3 load
|
commit | commitdiff | tree |
| 2013-05-07 |
Bdale Garbee | lose the muffin pdf during a clean
|
commit | commitdiff | tree |
| 2013-04-23 |
Bdale Garbee | add muffin label generation, clean up some attributes
|
commit | commitdiff | tree |
| 2013-04-22 |
Bdale Garbee | rename MegaMetrum to TeleMega
|
commit | commitdiff | tree |
| 2013-03-26 |
Bdale Garbee | add a series resistor in the reset line to the GPS...
|
commit | commitdiff | tree |
| 2013-03-22 |
Bdale Garbee | route complete, drc clean
|
commit | commitdiff | tree |
| 2013-03-21 |
Bdale Garbee | update to include new pyro circuit .. placement done...
|
commit | commitdiff | tree |
| 2013-03-20 |
Bdale Garbee | prepare for overlay of new pyro circuit
|
commit | commitdiff | tree |
| 2013-03-18 |
Bdale Garbee | move to altusmetrum symbols
|
commit | commitdiff | tree |
| next |
projects / hw / telemega / search