summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
Keith Packard [Fri, 1 Jan 2016 21:18:58 +0000 (13:18 -0800)]
Replace dual-led footprint with version including cathode mark
This version has a dot for the cathode ends of the LEDs. It happens to
use a new origin location though, making the replacement diff larger
than it would have been.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 1 Jan 2016 20:32:10 +0000 (13:32 -0700)]
hide all refdes to clean up silk
Keith Packard [Thu, 31 Dec 2015 17:48:45 +0000 (09:48 -0800)]
Remove generated attribs and project files
These are auto-generated by pcb.mk now.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 31 Dec 2015 06:15:36 +0000 (22:15 -0800)]
Add .gitignore
Keith Packard [Thu, 31 Dec 2015 06:14:26 +0000 (22:14 -0800)]
Remove generated config files. Forward annotate 5.1k to pcb
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 31 Dec 2015 06:03:46 +0000 (22:03 -0800)]
Adapt to common parts database
Remove vendor and vendor_part_number fields.
Switch value on 5.1k resistor to 5.1k (was set to 5k)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 31 Dec 2015 05:16:36 +0000 (21:16 -0800)]
Switch to new build system
This required switching all of the symbols to our stock names; they
were using things like resistor-1.sym instead of just resistor.sym.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 14 Feb 2015 08:26:46 +0000 (00:26 -0800)]
Move component labels around to be useful while loading board
This places the component labels on top of the components, making them
useful for locating things while loading the board from a printout.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 13 Feb 2015 22:10:17 +0000 (14:10 -0800)]
Make cc1111 pads square
Otherwise, we can't cut a stencil
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 13 Feb 2015 22:07:36 +0000 (14:07 -0800)]
Add muffins, fix 'zip' target.
Just a couple of makefile tweaks
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 20 Jan 2015 19:54:07 +0000 (11:54 -0800)]
Update component part numbers
Replace obsolete names, regularize resistors to our usual series.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 20 Jan 2015 19:53:31 +0000 (11:53 -0800)]
Fix partslist generation in Makefile
Import bits from newer Makefiles
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 20 Jan 2015 19:32:15 +0000 (11:32 -0800)]
Change FET pull-downs from 10k to 3.3k
This eliminates spurious transients on the ejection leads at power up
before the CPU pins are configured correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 20 Jan 2015 19:30:29 +0000 (11:30 -0800)]
Update copyright to 2015
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 7 Jun 2011 15:53:26 +0000 (09:53 -0600)]
explicitly do not include frontsilk in the zip file .. the refdes info is not
particularly useful and is completely illegible on this board
Bdale Garbee [Mon, 6 Jun 2011 02:09:26 +0000 (20:09 -0600)]
update version to 1.0 in anticipation of sending out for production quotes
add 'pwr' to silkscreen adjacent to power switch wire holes
Bdale Garbee [Fri, 13 May 2011 21:11:37 +0000 (15:11 -0600)]
add apogee / main labels to silk screen
Bdale Garbee [Tue, 26 Apr 2011 03:16:08 +0000 (21:16 -0600)]
fix attributes on power switch footprint
Bdale Garbee [Tue, 26 Apr 2011 03:03:52 +0000 (21:03 -0600)]
mark mounting holes as noload
Bdale Garbee [Thu, 21 Apr 2011 22:47:29 +0000 (16:47 -0600)]
add silkscreen rectangle for serial number
Bdale Garbee [Thu, 21 Apr 2011 22:42:17 +0000 (16:42 -0600)]
add 100uF ballast cap on 3.3V rail, update silkscreen version and copyright
Bdale Garbee [Tue, 19 Apr 2011 07:47:33 +0000 (01:47 -0600)]
update digikey part number of debug footprint mating header
Bdale Garbee [Tue, 19 Apr 2011 07:45:14 +0000 (01:45 -0600)]
change debug connector to 50 mil pitch
Bdale Garbee [Tue, 15 Mar 2011 13:37:02 +0000 (14:37 +0100)]
more copper shoving to add a "guard trace" at ground between the oscillator
body and the RF filters
Bdale Garbee [Tue, 15 Mar 2011 13:13:21 +0000 (14:13 +0100)]
move oscillator as far west as possible to try and reduce crosstalk with TX
Bdale Garbee [Tue, 23 Nov 2010 06:28:28 +0000 (23:28 -0700)]
hide top silk again
Bdale Garbee [Tue, 23 Nov 2010 06:18:17 +0000 (23:18 -0700)]
make sure all silk elements are within board outline
Bdale Garbee [Tue, 23 Nov 2010 05:51:17 +0000 (22:51 -0700)]
add outline layer, center ground plane polygon
Bdale Garbee [Thu, 18 Nov 2010 23:19:31 +0000 (16:19 -0700)]
lose C9 as redundant on this tight layout
Bdale Garbee [Thu, 18 Nov 2010 23:00:18 +0000 (16:00 -0700)]
update to reflect footprint name change
Bdale Garbee [Thu, 11 Nov 2010 10:25:49 +0000 (03:25 -0700)]
add targets for automating outputs
Bdale Garbee [Thu, 11 Nov 2010 08:38:37 +0000 (01:38 -0700)]
add attributes
Bdale Garbee [Thu, 11 Nov 2010 08:27:12 +0000 (01:27 -0700)]
more copper shoving to reduce impedance in the pyro firing circuit
Bdale Garbee [Thu, 11 Nov 2010 07:59:17 +0000 (00:59 -0700)]
component move to improve bypass capacitor placement relative to regulator
Bdale Garbee [Thu, 11 Nov 2010 00:21:53 +0000 (17:21 -0700)]
fix reset circuit component values to match TeleMetrum v0.1, and shove a lot
of copper around making things a bit less chaotic and leaving the ground
plane more intact
Bdale Garbee [Wed, 10 Nov 2010 18:13:44 +0000 (11:13 -0700)]
no remaining DRC errors
Bdale Garbee [Tue, 9 Nov 2010 05:16:45 +0000 (22:16 -0700)]
route complete, 16 DRC errors
Bdale Garbee [Mon, 8 Nov 2010 20:11:37 +0000 (13:11 -0700)]
This is a TeleNano but with dual deployment .. calling it TeleMini since it
falls between TeleNano and TeleMetrum... ;-)
Bdale Garbee [Mon, 8 Nov 2010 19:46:09 +0000 (12:46 -0700)]
change project name to TeleMini
Bdale Garbee [Mon, 8 Nov 2010 04:57:11 +0000 (21:57 -0700)]
lose junk file accidentally included
Bdale Garbee [Mon, 8 Nov 2010 04:56:48 +0000 (21:56 -0700)]
initial design import