== EasyMega Outline and Hole Pattern
This image, when printed, provides a precise template for the
mounting holes in EasyMega. EasyMega has overall dimensions of
- 1.250 x 2.250 inches, and the mounting holes are sized for use
- with 4-40 or M3 screws.
+ 1.250 x 2.250 inches, and the mounting holes are 0.125 inches from
+ each board edge. That means the mounting holes are in a rectangle
+ measuring 1.000 x 2.00 inches, sized for use with 4-40 or M3 screws.
image::easymega.svg[align="center"]
This image, when printed, provides a precise template for the
mounting holes in EasyMini, EasyMotor, and EasyTimer. Each of
these products has overall dimensions of 0.800 x 1.500 inches,
- and the mounting holes are sized for use with 4-40 or M3 screws.
+ and the mounting holes are 0.125 inches from each board edge.
+ That means the mounting holes are in a rectangle measuring
+ 0.550 x 1.250 inches apart, sized for use with 4-40 or M3 screws.
image::easymini.svg[align="center"]
+
== TeleGPS Outline and Hole Pattern
This image, when printed, provides a precise template for the
mounting holes in TeleGPS. TeleGPS has overall dimensions
- of 1.000 x 1.500 inches, and the mounting holes are sized for
- use with 4-40 or M3 screws.
+ of 1.000 x 1.500 inches, and the mounting holes are 0.125 inches
+ from each board edge. That means the mounting holes are in a
+ rectangle measuring 0.750 x 1.250 inches apart, sized for use with
+ 4-40 or M3 screws.
image::telegps.svg[align="center"]
== TeleMega Outline and Hole Pattern
This image, when printed, provides a precise template for the
mounting holes in TeleMega. TeleMega has overall dimensions of
- 1.250 x 3.250 inches, and the mounting holes are sized for use
- with 4-40 or M3 screws.
+ 1.250 x 3.250 inches, and the mounting holes are 0.125 inches
+ from each board edge. That means the mounting holes are in a
+ rectangle measuring 1.000 x 3.000 inches apart, sized for use with
+ 4-40 or M3 screws.
image::telemega.svg[align="center"]
== TeleMetrum Outline and Hole Pattern
This image, when printed, provides a precise template for the
mounting holes in TeleMetrum. TeleMetrum has overall dimensions of
- 1.000 x 2.750 inches, and the mounting holes are sized for use
- with 4-40 or M3 screws.
+ 1.000 x 2.750 inches, and the mounting holes are 0.125 inches from
+ three of the board edges, and 0.375 inches from the screw terminal
+ end. That means they are in a rectangle measuring 0.750 x 2.250
+ inches, sized for use with 4-40 or M3 screws.
image::telemetrum.svg[align="center"]
This image, when printed, provides a precise template for the
mounting holes in TeleMini. TeleMini v1 has overall dimensions of
- 0.500 x 1.500 inches, and the mounting holes are sized for use
- with 2-56 or M2 screws. The holes are located 0.100 inches
- from the edge of the board in both directions.
+ 0.500 x 1.500 inches, and the mounting holes are sized for use with
+ 2-56 or M2 screws. The holes are located 0.100 inches from the edge
+ of the board in both directions, meaning they are 0.300 inches apart.
image::telemini-v1.svg[align="center"]
mounting holes in TeleMini v3. TeleMini v3 has overall dimensions of
0.500 x 1.670 inches, and the mounting holes are sized for use
with 2-56 or M2 screws. The holes are located 0.085 inches
- from the edge of the board in both directions.
+ from the edge of the board in both directions, meaning they are
+ located in a rectangle of 0.330 x 1.500 inches.
image::telemini-v3.svg[align="center"]