* *
* Copyright (C) 2009 by David N. Claffey <dnclaffey@gmail.com> *
* *
+ * Copyright (C) 2011 by Drasko DRASKOVIC *
+ * drasko.draskovic@gmail.com *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
#include "config.h"
#endif
+#include <helper/time_support.h>
+
#include "mips32.h"
#include "mips32_pracc.h"
static int wait_for_pracc_rw(struct mips_ejtag *ejtag_info, uint32_t *ctrl)
{
uint32_t ejtag_ctrl;
+ long long then = timeval_ms();
+ int timeout;
+ int retval;
+
+ /* wait for the PrAcc to become "1" */
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL);
+ ejtag_ctrl = ejtag_info->ejtag_ctrl;
while (1)
{
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL);
- ejtag_ctrl = ejtag_info->ejtag_ctrl;
- mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ retval = mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ if (retval != ERROR_OK)
+ return retval;
+
if (ejtag_ctrl & EJTAG_CTRL_PRACC)
break;
- LOG_DEBUG("DEBUGMODULE: No memory access in progress!");
- return ERROR_JTAG_DEVICE_ERROR;
+
+ if ( (timeout = timeval_ms()-then) > 1000 )
+ {
+ LOG_DEBUG("DEBUGMODULE: No memory access in progress!");
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
}
*ctrl = ejtag_ctrl;
/* Send the data out */
mips_ejtag_set_instr(ctx->ejtag_info, EJTAG_INST_DATA);
- mips_ejtag_drscan_32(ctx->ejtag_info, &data);
+ mips_ejtag_drscan_32_out(ctx->ejtag_info, data);
/* Clear the access pending bit (let the processor eat!) */
ejtag_ctrl = ejtag_info->ejtag_ctrl & ~EJTAG_CTRL_PRACC;
mips_ejtag_set_instr(ctx->ejtag_info, EJTAG_INST_CONTROL);
- mips_ejtag_drscan_32(ctx->ejtag_info, &ejtag_ctrl);
+ mips_ejtag_drscan_32_out(ctx->ejtag_info, ejtag_ctrl);
- jtag_add_clocks(5);
return jtag_execute_queue();
}
uint32_t ejtag_ctrl,data;
int offset;
struct mips_ejtag *ejtag_info = ctx->ejtag_info;
+ int retval;
mips_ejtag_set_instr(ctx->ejtag_info, EJTAG_INST_DATA);
- mips_ejtag_drscan_32(ctx->ejtag_info, &data);
+ retval = mips_ejtag_drscan_32(ctx->ejtag_info, &data);
+ if (retval != ERROR_OK)
+ return retval;
/* Clear access pending bit */
ejtag_ctrl = ejtag_info->ejtag_ctrl & ~EJTAG_CTRL_PRACC;
mips_ejtag_set_instr(ctx->ejtag_info, EJTAG_INST_CONTROL);
- mips_ejtag_drscan_32(ctx->ejtag_info, &ejtag_ctrl);
+ mips_ejtag_drscan_32_out(ctx->ejtag_info, ejtag_ctrl);
- jtag_add_clocks(5);
- return jtag_execute_queue();
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
+ return retval;
if ((address >= MIPS32_PRACC_PARAM_IN)
&& (address <= MIPS32_PRACC_PARAM_IN + ctx->num_iparam * 4))
address = data = 0;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS);
- mips_ejtag_drscan_32(ejtag_info, &address);
+ retval = mips_ejtag_drscan_32(ejtag_info, &address);
+ if (retval != ERROR_OK)
+ return retval;
/* Check for read or write */
if (ejtag_ctrl & EJTAG_CTRL_PRNW)
uint32_t *param_out = malloc(count * sizeof(uint32_t));
int i;
-// int retval;
+ int retval = ERROR_OK;
int blocksize;
- int bytesread;
uint32_t param_in[2];
- bytesread = 0;
-
//while (count > 0)
{
blocksize = count;
param_in[0] = addr;
param_in[1] = blocksize;
- mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
ARRAY_SIZE(param_in), param_in, count, param_out, 1);
// count -= blocksize;
// addr += blocksize;
-// bytesread += blocksize;
}
for (i = 0; i < count; i++)
free(param_out);
- return ERROR_OK;
+ return retval;
}
static int mips32_pracc_read_mem8(struct mips_ejtag *ejtag_info, uint32_t addr, int count, uint8_t *buf)
uint32_t *param_out = malloc(count * sizeof(uint32_t));
int i;
-// int retval;
+ int retval = ERROR_OK;
int blocksize;
- int bytesread;
uint32_t param_in[2];
- bytesread = 0;
-
// while (count > 0)
{
blocksize = count;
param_in[0] = addr;
param_in[1] = blocksize;
- mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
ARRAY_SIZE(param_in), param_in, count, param_out, 1);
// count -= blocksize;
// addr += blocksize;
-// bytesread += blocksize;
}
for (i = 0; i < count; i++)
free(param_out);
- return ERROR_OK;
+ return retval;
+}
+
+int mips32_cp0_read(struct mips_ejtag *ejtag_info, uint32_t *val, uint32_t cp0_reg, uint32_t cp0_sel)
+{
+ /**
+ * Do not make this code static, but regenerate it every time,
+ * as 5th element has to be changed to add parameters
+ */
+ uint32_t code[] = {
+ /* start: */
+ MIPS32_MTC0(15,31,0), /* move $15 to COP0 DeSave */
+ MIPS32_LUI(15,UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
+ MIPS32_ORI(15,15,LOWER16(MIPS32_PRACC_STACK)),
+ MIPS32_SW(8,0,15), /* sw $8,($15) */
+ MIPS32_SW(9,0,15), /* sw $9,($15) */
+
+ /* 5 */ MIPS32_MFC0(8,0,0), /* move COP0 [cp0_reg select] to $8 */
+
+ MIPS32_LUI(9,UPPER16(MIPS32_PRACC_PARAM_OUT)), /* $11 = MIPS32_PRACC_PARAM_OUT */
+ MIPS32_ORI(9,9,LOWER16(MIPS32_PRACC_PARAM_OUT)),
+ MIPS32_SW(8,0,9), /* sw $8,0($9) */
+
+ MIPS32_LW(9,0,15), /* lw $9,($15) */
+ MIPS32_LW(8,0,15), /* lw $8,($15) */
+ MIPS32_B(NEG16(12)), /* b start */
+ MIPS32_MFC0(15,31,0), /* move COP0 DeSave to $15 */
+ };
+
+ /**
+ * Note that our input parametes cp0_reg and cp0_sel
+ * are numbers (not gprs) which make part of mfc0 instruction opcode.
+ *
+ * These are not fix, but can be different for each mips32_cp0_read() function call,
+ * and that is why we must insert them directly into opcode,
+ * i.e. we can not pass it on EJTAG microprogram stack (via param_in),
+ * and put them into the gprs later from MIPS32_PRACC_STACK
+ * because mfc0 do not use gpr as a parameter for the cp0_reg and select part,
+ * but plain (immediate) number.
+ *
+ * MIPS32_MTC0 is implemented via MIPS32_R_INST macro.
+ * In order to insert our parameters, we must change rd and funct fields.
+ */
+ code[5] |= (cp0_reg << 11) | cp0_sel; /* change rd and funct of MIPS32_R_INST macro */
+
+ /* TODO remove array */
+ uint32_t *param_out = val;
+ int retval;
+
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, 0, NULL, 1, param_out, 1);
+
+ return retval;
+}
+
+int mips32_cp0_write(struct mips_ejtag *ejtag_info,
+ uint32_t val, uint32_t cp0_reg, uint32_t cp0_sel)
+{
+ uint32_t code[] = {
+ /* start: */
+ MIPS32_MTC0(15,31,0), /* move $15 to COP0 DeSave */
+ MIPS32_LUI(15,UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
+ MIPS32_ORI(15,15,LOWER16(MIPS32_PRACC_STACK)),
+ MIPS32_SW(8,0,15), /* sw $8,($15) */
+ MIPS32_SW(9,0,15), /* sw $9,($15) */
+
+ MIPS32_LUI(8,UPPER16(MIPS32_PRACC_PARAM_IN)), /* $8 = MIPS32_PRACC_PARAM_IN */
+ MIPS32_ORI(8,8,LOWER16(MIPS32_PRACC_PARAM_IN)),
+ MIPS32_LW(9,0,8), /* Load write val to $9 */
+
+ /* 8 */ MIPS32_MTC0(9,0,0), /* move $9 to COP0 [cp0_reg select] */
+
+ MIPS32_LW(9,0,15), /* lw $9,($15) */
+ MIPS32_LW(8,0,15), /* lw $8,($15) */
+ MIPS32_B(NEG16(12)), /* b start */
+ MIPS32_MFC0(15,31,0), /* move COP0 DeSave to $15 */
+ };
+
+ /**
+ * Note that MIPS32_MTC0 macro is implemented via MIPS32_R_INST macro.
+ * In order to insert our parameters, we must change rd and funct fields.
+ */
+ code[8] |= (cp0_reg << 11) | cp0_sel; /* change rd and funct fields of MIPS32_R_INST macro */
+
+ /* TODO remove array */
+ uint32_t *param_in = malloc(1 * sizeof(uint32_t));
+ int retval;
+ param_in[0] = val;
+
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, 1, param_in, 0, NULL, 1);
+
+ free(param_in);
+
+ return retval;
}
int mips32_pracc_write_mem(struct mips_ejtag *ejtag_info, uint32_t addr, int size, int count, void *buf)
memcpy(¶m_in[2], buf, count * sizeof(uint32_t));
- mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
+ int retval;
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
count + 2, param_in, 0, NULL, 1);
free(param_in);
- return ERROR_OK;
+ return retval;
}
static int mips32_pracc_write_u32(struct mips_ejtag *ejtag_info, uint32_t addr, uint32_t *buf)
param_in[0] = addr;
param_in[1] = *buf;
- mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
+ return mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
ARRAY_SIZE(param_in), param_in, 0, NULL, 1);
-
- return ERROR_OK;
}
static int mips32_pracc_write_mem16(struct mips_ejtag *ejtag_info, uint32_t addr, int count, uint16_t *buf)
param_in[i + 2] = buf[i];
}
- mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
+ int retval;
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
count + 2, param_in, 0, NULL, 1);
free(param_in);
- return ERROR_OK;
+ return retval;
}
static int mips32_pracc_write_mem8(struct mips_ejtag *ejtag_info, uint32_t addr, int count, uint8_t *buf)
param_in[i + 2] = buf[i];
}
- retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
count + 2, param_in, 0, NULL, 1);
free(param_in);
int retval;
- retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
MIPS32NUMCOREREGS, regs, 0, NULL, 1);
return retval;
int retval;
- retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
+ retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
0, NULL, MIPS32NUMCOREREGS, regs, 1);
return retval;
return retval;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA);
- mips_ejtag_drscan_32(ejtag_info, &jmp_code[i]);
+ mips_ejtag_drscan_32_out(ejtag_info, jmp_code[i]);
/* Clear the access pending bit (let the processor eat!) */
ejtag_ctrl = ejtag_info->ejtag_ctrl & ~EJTAG_CTRL_PRACC;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL);
- mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ mips_ejtag_drscan_32_out(ejtag_info, ejtag_ctrl);
}
if ((retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl)) != ERROR_OK)
/* next fetch to dmseg should be in FASTDATA_AREA, check */
address = 0;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS);
- mips_ejtag_drscan_32(ejtag_info, &address);
+ retval = mips_ejtag_drscan_32(ejtag_info, &address);
+ if (retval != ERROR_OK)
+ return retval;
if (address != MIPS32_PRACC_FASTDATA_AREA)
return ERROR_FAIL;
+ /* wait PrAcc pending bit for FASTDATA write */
+ if ((retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl)) != ERROR_OK)
+ return retval;
+
/* Send the load start address */
val = addr;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_FASTDATA);
/* Send the load end address */
val = addr + (count - 1) * 4;
- mips_ejtag_set_instr(ejtag_info, EJTAG_INST_FASTDATA);
mips_ejtag_fastdata_scan(ejtag_info, 1, &val);
for (i = 0; i < count; i++)
{
- /* Send the data out using fastdata (clears the access pending bit) */
if ((retval = mips_ejtag_fastdata_scan(ejtag_info, write_t, buf++)) != ERROR_OK)
return retval;
}
address = 0;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS);
- mips_ejtag_drscan_32(ejtag_info, &address);
+ retval = mips_ejtag_drscan_32(ejtag_info, &address);
+ if (retval != ERROR_OK)
+ return retval;
if (address != MIPS32_PRACC_TEXT)
LOG_ERROR("mini program did not return to start");