== EasyMini
.EasyMini Board
- image::easymini-top.jpg[width="5.5in"]
+ image::easymini-top.jpg[width=400]
EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
designed to fit in a 24mm coupler tube.
|Main pyro channel connection to pyro circuit
|Top 2
- |Main +
- |Main pyro channel common connection to battery +
+ |Main +++
+ |Main pyro channel common connection to battery +++
|Top 3
- |Battery +
+ |Battery +++
|Positive external battery terminal
|Top 4
|Apogee pyro channel connection to pyro circuit
|Bottom 2
- |Apogee +
- |Apogee pyro channel common connection to battery +
+ |Apogee +++
+ |Apogee pyro channel common connection to battery +++
|Bottom 3
|Switch Output
ground, connect it to the negative external battery
connection, top terminal 4.
- Connecting the positive battery terminal to the pyro
+ Connecting the switched positive battery terminal to the pyro
charges must be done separate from EasyMini, by soldering
- them together or using some other connector.
+ them together or using some other connector. Note that for
+ safety, you must put a switch between the pyro battery and
+ the rest of the circuit!
The other lead from each pyro charge is then inserted into
the appropriate per-pyro channel screw terminal (top