+cannot log data, so the only thing you will lose is the data.</p>
+</div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_altus_metrum_hardware_specifications">Appendix E: Altus Metrum Hardware Specifications</h2>
+<div class="sectionbody">
+<div class="paragraph">
+<p>Here’s the full set of Altus Metrum products, both in
+production and retired.</p>
+</div>
+<table class="tableblock frame-all grid-all stretch">
+<caption class="title">Table 12. Altus Metrum Flight Computer Electronics</caption>
+<colgroup>
+<col style="width: 12.5%;">
+<col style="width: 12.5%;">
+<col style="width: 12.5%;">
+<col style="width: 12.5%;">
+<col style="width: 12.5%;">
+<col style="width: 12.5%;">
+<col style="width: 12.5%;">
+<col style="width: 12.5%;">
+</colgroup>
+<thead>
+<tr>
+<th class="tableblock halign-left valign-top">Device</th>
+<th class="tableblock halign-left valign-top">Barometer</th>
+<th class="tableblock halign-left valign-top">Z-axis accel</th>
+<th class="tableblock halign-left valign-top">GPS</th>
+<th class="tableblock halign-left valign-top">3D sensors</th>
+<th class="tableblock halign-left valign-top">Storage</th>
+<th class="tableblock halign-left valign-top">RF Output</th>
+<th class="tableblock halign-left valign-top">Battery</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMetrum v1.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MP3H6115 10km (33k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MMA2202 50g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">SkyTraq</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">10mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMetrum v1.1</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MP3H6115 10km (33k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MMA2202 50g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">SkyTraq</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">2MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">10mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMetrum v1.2</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MP3H6115 10km (33k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">ADXL78 70g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">SkyTraq</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">2MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">10mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMetrum v2.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MMA6555 102g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">uBlox Max-7Q</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">40mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMetrum v3.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">ADXL375 200g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">uBlox Max-8Q</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">40mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMini v1.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MP3H6115 10km (33k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">5kB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">10mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMini v3.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">512kB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">40mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyMini v1.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7-12V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyMini v2.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7-12V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMega v1.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MMA6555 102g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">uBlox Max-7Q</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MPU6000 HMC5883</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">40mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMega v2.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MMA6555 102g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">uBlox Max-7Q</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MPU6000 HMC5883</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">40mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMega v3.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MMA6555 102g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">uBlox Max-7Q</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MPU9250</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">40mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMega v4.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">ADXL375 200g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">uBlox Max-8Q</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">BMX160</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">40mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMega v5.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">ADXL375 200g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">uBlox Max-8Q</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MPU6000 MMC5983</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">40mW</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyMega v1.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MMA6555 102g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MPU6000 HMC5883</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyMega v2.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MS5607 30km (100k')</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">ADXL375 200g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">MPU9250</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">8MB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyTimer v1.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">16g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">BMX160</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3.7-12V</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyMotor v2.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">ADXL375 200g</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">-</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">6.5-15V</p></td>
+</tr>
+</tbody>
+</table>
+<div style="page-break-after: always;"></div>
+<table class="tableblock frame-all grid-all stretch">
+<caption class="title">Table 13. Altus Metrum Flight Computer Mechanical Components</caption>
+<colgroup>
+<col style="width: 16.6666%;">
+<col style="width: 16.6666%;">
+<col style="width: 16.6666%;">
+<col style="width: 16.6666%;">
+<col style="width: 16.6666%;">
+<col style="width: 16.667%;">
+</colgroup>
+<thead>
+<tr>
+<th class="tableblock halign-left valign-top">Device</th>
+<th class="tableblock halign-left valign-top">Connectors</th>
+<th class="tableblock halign-left valign-top">Screw Terminals</th>
+<th class="tableblock halign-left valign-top">Width</th>
+<th class="tableblock halign-left valign-top">Length</th>
+<th class="tableblock halign-left valign-top">Tube Size</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMetrum</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Antenna Debug Companion USB Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Apogee pyro Main pyro Switch</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1 inch (2.54cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">2 ¾ inch (6.99cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">29mm coupler</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMini v1.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Antenna Debug Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Apogee pyro Main pyro</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">½ inch (1.27cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1½ inch (3.81cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">18mm coupler</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMini v2.0</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Antenna Debug USB Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Apogee pyro Main pyro Battery Switch</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">0.8 inch (2.03cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1½ inch (3.81cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">24mm coupler</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyMini</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Debug USB Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Apogee pyro Main pyro Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">0.8 inch (2.03cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1½ inch (3.81cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">24mm coupler</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">TeleMega</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Antenna Debug Companion USB Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Apogee pyro Main pyro Pyro A-D Switch Pyro battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1¼ inch (3.18cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">3¼ inch (8.26cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">38mm coupler</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyMega</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Debug Companion USB Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Apogee pyro Main pyro Pyro A-D Switch Pyro battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1¼ inch (3.18cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">2¼ inch (5.62cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">38mm coupler</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyTimer</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Debug USB Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Pyro A Pyro B Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">0.8 inch (2.03cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1½ inch (3.81cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">24mm coupler</p></td>
+</tr>
+<tr>
+<td class="tableblock halign-left valign-top"><p class="tableblock">EasyMotor</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">Debug USB</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">+5V Pres GND Switch Battery</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">0.8 inch (2.03cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">1½ inch (3.81cm)</p></td>
+<td class="tableblock halign-left valign-top"><p class="tableblock">24mm coupler</p></td>
+</tr>
+</tbody>
+</table>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_release_notes">Appendix F: Release Notes</h2>
+<div class="sectionbody">
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_9">F.1. Release Notes for Version 1.9.9</h3>
+<div class="paragraph">
+<p>Version 1.9.9</p>
+</div>
+<div class="paragraph">
+<p>This release contains a critical bug fix for a problem
+introduced in version 1.9.8 for TeleMega and EasyMega
+boards. This problem occurs when using the stored
+configuration from 1.9.7 or earlier.</p>
+</div>
+<div class="paragraph">
+<p>If you are running 1.9.8 or are upgrading from 1.9.8 on any
+version of TeleMega or EasyMega, you must reconfigure all pyro
+channels, recalibrate accelerometers, reset the APRS interval,
+adjust the beep tone and reset the pyro time.</p>
+</div>
+<div class="sect3">
+<h4 id="_altos">F.1.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Fix EasyMega and TeleMega upgrade process from 1.9.7 or
+earlier. 1.9.8 introduced larger delay values, which
+required modifying the configuration in-place, and the 1.9.8
+version had a flaw which broke the pyro channel config and
+all of the config values beyond that in memory, including
+APRS interval, IMU accel calibation, beep tone and pyro
+time.</p>
+</li>
+<li>
+<p>Fix TeleMega v5.0 mag sensor driver. This driver was quite
+broken due to developing it in the presence of the magnetic
+beeper on the board. Because of that beeper, the values this
+sensor records are not accurate. Fortunately, they are not
+used for controlling the flight.</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_2">F.1.2. AltosUI</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Parse TeleMega v5.0 log files. A missing check in the code
+meant that the TeleMega v5.0 log files would cause an error
+when attempting to load them. Logs saved with AltosUI
+1.9.8 were not affected, only the presentation of the data
+was broken.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_8">F.2. Release Notes for Version 1.9.8</h3>
+<div class="paragraph">
+<p>Version 1.9.8</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_2">F.2.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add support for TeleMega v5.0</p>
+</li>
+<li>
+<p>Extend extra pyro channel times to support delay > 327 seconds</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_3">F.2.2. AltosUI</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Support ARM devices in Linux binary release</p>
+</li>
+<li>
+<p>Add support for TeleMega v5.0</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosdroid_2">F.2.3. AltosDroid</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Show tilt angle in pad and flight tabs</p>
+</li>
+<li>
+<p>Show altitude as well as height (useful for TeleGPS)</p>
+</li>
+<li>
+<p>Support devices without GPS receivers</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_micropeak_gui">F.2.4. MicroPeak GUI</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Show error dialog if device open fails</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_7">F.3. Release Notes for Version 1.9.7</h3>
+<div class="paragraph">
+<p>Version 1.9.7</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_3">F.3.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Fix TeleGPS logging so that new data are appended to an existing log correctly</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_4">F.3.2. AltosUI</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Support Mac OS X 11 (Big Sur)</p>
+</li>
+<li>
+<p>Support Monitor Idle on Easy Timer</p>
+</li>
+<li>
+<p>Fix TeleMega v4.0 and TeleMetrum v3.0 configuration in Antenna Down mode</p>
+</li>
+<li>
+<p>Show launch sites in Load Maps view</p>
+</li>
+<li>
+<p>Add IMU header names to CSV files</p>
+</li>
+<li>
+<p>Clean up TeleGPS log corruption due to firmware bugs during firmware update</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosdroid_3">F.3.3. AltosDroid</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Support older devices back to Android version 5.1</p>
+</li>
+<li>
+<p>Fix a number of issues that could result in app crashes</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_6">F.4. Release Notes for Version 1.9.6</h3>
+<div class="paragraph">
+<p>Version 1.9.6</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_4">F.4.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Fix EasyTimer bug where it might mis-detect boost (either
+detect it early or not at all) due to small errors in
+accelerometer calibration leading to large accumulated error
+in speed.</p>
+</li>
+<li>
+<p>Adjust self-test of new 9-axis IMU (BMX-160) so that it
+doesn’t think the part has a failure when tested sitting
+horizontally.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_5">F.5. Release Notes for Version 1.9.5</h3>
+<div class="paragraph">
+<p>Version 1.9.5</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_5">F.5.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add Booster mode for all dual-deploy altimeters. Select
+"Separation & Apogee" mode in AltosUI to fire the 'main'
+channel at first motor burnout and the 'apogee' channel at
+apogee.</p>
+</li>
+<li>
+<p>Improve reliability of stm32l firmware under heavy
+load. This was found using Monitor Idle on TeleMega with all
+flash slots full of data which would occasionally lock up.</p>
+</li>
+<li>
+<p>Fix orientation label in AltosUI for devices with
+radios. This makes the orientation say 'Antenna up' and
+'Antenna Down' for TeleMetrum and TeleMega again.</p>
+</li>
+<li>
+<p>Fix log data for pyro channels which were inhibited (often
+because of a tilt limit). They used to report 'fired' as
+soon as they were inhibited, which was misleading. Now they
+never report as having been fired.</p>
+</li>
+<li>
+<p>Allow Igniter Test to fire each igniter more than once.</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_5">F.5.2. AltosUI</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Improve performance of Monitor Idle mode by sending less data for each
+update.</p>
+</li>
+<li>
+<p>Improve Mac OS X install scripts so that they work on
+Catalina. This involves sending the user to get Java from
+the AdoptOpenJDK project which provides a version that works
+with Java applications.</p>
+</li>
+<li>
+<p>Make larger dialogs scrollable for use on smaller screens.</p>
+</li>
+<li>
+<p>Fix troubles re-flashing EasyMega boards running older
+firmware.</p>
+</li>
+<li>
+<p>Add TeleMetrum v3.0 firmware to the Windows
+AltosUI packages.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_4">F.6. Release Notes for Version 1.9.4</h3>
+<div class="paragraph">
+<p>Version 1.9.4</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_6">F.6.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Fixed firmware for TeleDongle v3.0 and TeleBT v4.0. Version 1.9.3 bricked those
+devices requiring them to be opened up to get them working again.</p>
+</li>
+<li>
+<p>Fixed firmware for EasyMini v1.0. Changes in the storage
+code caused it to use significantly more RAM which made the
+interrupt stack smash into other data structures and cause
+the device to panic at startup time.</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_6">F.6.2. AltosUI</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add TeleMetrum v3.0 firmware to the Linux and Mac OSX
+AltosUI packages.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_3">F.7. Release Notes for Version 1.9.3</h3>
+<div class="paragraph">
+<p>Version 1.9.3</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_7">F.7.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add APRS offset. Allows multiple APRS transmitters to coordinate when
+transmission occurs to allow them to share a frequency.</p>
+</li>
+<li>
+<p>Fix max log size. Flight computer storage is erased in 64kB chunks. Adjust max
+log size to be a multiple of this size.</p>
+</li>
+<li>
+<p>Check flight erasing more carefully. Handle interrupting erasing in the
+middle.</p>
+</li>
+<li>
+<p>Add EasyTimer support.</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_telegps_micropeak">F.7.2. AltosUI, TeleGPS, MicroPeak</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add configuration support for APRS offset.</p>
+</li>
+<li>
+<p>Adjust flight log sizes to be a multiple of the flight
+computer erase block size.</p>
+</li>
+<li>
+<p>Report barometric pad altitude in Pad tab for TeleMini.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_2">F.8. Release Notes for Version 1.9.2</h3>
+<div class="paragraph">
+<p>Version 1.9.2</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_8">F.8.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add support for TeleMega v4.0</p>
+</li>
+<li>
+<p>Fix time wrapping issue with TeleLCO and TeleFire</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_telegps_micropeak_2">F.8.2. AltosUI, TeleGPS, MicroPeak</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add column in AltosUI for IMU data from TeleMega and EasyMega</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosdroid_4">F.8.3. AltosDroid</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Allow sorting of trackers by call, serial, frequency or age</p>
+</li>
+<li>
+<p>Offer selection of font sizes</p>
+</li>
+<li>
+<p>Various bug fixes for older Android versions</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9_1">F.9. Release Notes for Version 1.9.1</h3>
+<div class="paragraph">
+<p>Version 1.9.1</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_9">F.9.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add support for TeleMetrum v3.0</p>
+</li>
+<li>
+<p>Fix accel cal value when changing EasyMega v2.0 pad orientation</p>
+</li>
+<li>
+<p>Correct EasyMega v2.0 magnetometer data axes</p>
+</li>
+<li>
+<p>Fix EasyMega v2.0 idle monitor display of IMU data</p>
+</li>
+<li>
+<p>Report all sensor failures at power-up time.</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_telegps_micropeak_3">F.9.2. AltosUI, TeleGPS, MicroPeak</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Display error message when attempting to graph unknown format file.</p>
+</li>
+<li>
+<p>Make it possible to disable APRS once enabled.</p>
+</li>
+<li>
+<p>Display some data for point near cursor in map tab.</p>
+</li>
+<li>
+<p>Support upgrading devices from pre-1.8 firmware</p>
+</li>
+<li>
+<p>Wait for Windows to prepare new devices during firmware
+upgrade. This should avoid the “COMxx: open failed” message.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_9">F.10. Release Notes for Version 1.9</h3>
+<div class="paragraph">
+<p>Version 1.9</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_10">F.10.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Add support for EasyMega v2.0</p>
+</li>
+<li>
+<p>Replace C library for ARM devices</p>
+</li>
+<li>
+<p>Remove support for 8051-based devices and SDCC compiler</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_telegps_micropeak_4">F.10.2. AltosUI, TeleGPS, MicroPeak</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Select ROM images based on product name when reflashing</p>
+</li>
+<li>
+<p>Fix TeleGPS v2 battery voltage display</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_8_7">F.11. Release Notes for Version 1.8.7</h3>
+<div class="paragraph">
+<p>Version 1.8.7</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_11">F.11.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Include TeleMega v3.0 firmware</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_telegps_micropeak_5">F.11.2. AltosUI, TeleGPS, MicroPeak</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Poll for new devices while Device dialog is displayed</p>
+</li>
+<li>
+<p>Wait for device to re-appear when flashing new firmware</p>
+</li>
+<li>
+<p>Fetch correct TeleBT v4.0 RF calibration values from web
+site when reflashing.</p>
+</li>
+<li>
+<p>Change gyro headings in .csv files from x/y/z to
+roll/pitch/yaw</p>
+</li>
+<li>
+<p>Add documentation about Packet Link mode</p>
+</li>
+<li>
+<p>Add documentation about forcing TeleMini RF parameters to
+known values.</p>
+</li>
+<li>
+<p>Create a proxy server for Google Maps to re-enable map
+images</p>
+</li>
+<li>
+<p>Fix Java version info in all distributed jar files so that
+applications will run with standard Mac OS X Java.</p>
+</li>
+<li>
+<p>Replace JavaApplicationStub for Mac OS X so that
+applications will run with Oracle Java.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_8_6">F.12. Release Notes for Version 1.8.6</h3>
+<div class="paragraph">
+<p>Version 1.8.6</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_12">F.12.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Use maximum of 64 previous tilt values in pyro tilt tests</p>
+</li>
+<li>
+<p>Eliminate 100m height requirement for coast detection</p>
+</li>
+<li>
+<p>Change After Motor pyro check to be >= instead of ==</p>
+</li>
+<li>
+<p>Change Time since Boost to be Time since launch.</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_telegps">F.12.2. AltosUI, TeleGPS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Clarify pyro test phrasing</p>
+</li>
+<li>
+<p>Remove ascending/descending from pyro config UI</p>
+</li>
+<li>
+<p>Fix accel calibration in Antenna Down mode</p>
+</li>
+<li>
+<p>Add mag sensor reporting for TeleMega v3 idle monitoring.</p>
+</li>
+<li>
+<p>Fix radio parameter saving at 2400 bps telmetry rate.</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_micropeak">F.12.3. MicroPeak</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Report altimeter-recorded maximum height value</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_8_5">F.13. Release Notes for Version 1.8.5</h3>
+<div class="paragraph">
+<p>Version 1.8.5 includes fixes to the ground software support
+for TeleBT v4, along with a few other minor updates.</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_13">F.13.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Fix startup beeps that indicate sensor failures.</p>
+</li>
+</ul>
+</div>
+</div>
+<div class="sect3">
+<h4 id="_altosui_telegps_2">F.13.2. AltosUI, TeleGPS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>When updating device firmware, make sure selected firmware
+matches target device.</p>
+</li>
+<li>
+<p>Correct Bluetooth device matching when looking for TeleBT
+devices.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_8_4">F.14. Release Notes for Version 1.8.4</h3>
+<div class="paragraph">
+<p>Version 1.8.4 includes support for EasyMini version 2.0</p>
+</div>
+<div class="sect3">
+<h4 id="_altos_14">F.14.1. AltOS</h4>
+<div class="ulist">
+<ul>
+<li>
+<p>Support for EasyMini version 2.0 hardware.</p>
+</li>
+</ul>
+</div>
+<div style="page-break-after: always;"></div>
+</div>
+</div>
+<div class="sect2">
+<h3 id="_release_notes_for_version_1_8_3">F.15. Release Notes for Version 1.8.3</h3>
+<div class="paragraph">
+<p>Version 1.8.3 includes support for TeleMega version 3.0 along