1 altos (0.6+224+g4766b13) unstable; urgency=low
4 * documentation updates from Bob
7 * Extension to KML output format, and minor bug fix
10 * ao-view: disable radio telemetry monitoring during channel change
11 * Add special code for USB panic's.
12 * ao-postflight: was walking off state.data array
13 * Abort any in-progress radio operation when changing radio channel
15 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
17 altos (0.6+214+g16c4cae) unstable; urgency=low
20 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
21 * merge a derivative of Bob Finch's mere mortals guide as getting started
22 * merge the altusmetrum-themes package
25 * Fix telemetrum.inf, tested by Adrian and Keithp
26 * Finish basic flight monitoring UI with voice using FreeTTS
28 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
30 altos (0.6+204+g6bd8513) unstable; urgency=low
32 * lose the quotes since they apparently aren't necessary
34 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
36 altos (0.6+202+gae6854d) unstable; urgency=low
38 * update desktop file for conformance with current standards
40 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
42 altos (0.6+200+g68eaaa6) unstable; urgency=low
44 * add initial package build scripts for Arch Linux from Bob Finch
45 * add desktop file provided by Bob Finch
47 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
49 altos (0.6+195+gcde60f1) unstable; urgency=low
51 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
53 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
55 altos (0.6+193+g314d27a) unstable; urgency=low
58 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
60 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
62 altos (0.6+190+g8b6767e) unstable; urgency=low
65 * Fix all stdio reading functions to be __critical
66 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
68 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
70 altos (0.6+187+g8702f49) unstable; urgency=low
73 * more text created during SFO->DEN flight
74 * initial attempt at a telemetrum turn on script .. needs work
77 * Revert "Add optional 's' command to packet slave to enable/disable
79 * Disable interrupts while reading from stdin
81 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
83 altos (0.6+180+g99094f0) unstable; urgency=low
86 * Increase reset switch time to 100ms
87 * Add optional 's' command to packet slave to enable/disable slave
89 * More ALtosUI changes
90 * Autodetect flite voice registration function
93 * capture work done on SFO->DEN flight
94 * add some RF usage information from an email reply sent today, and
97 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
99 altos (0.6+171+g9394393) unstable; urgency=low
105 * Only have the slave return a packet if it received one.
107 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
109 altos (0.6+168+gc0ee1ae) unstable; urgency=low
112 * INSTALL file changed by auto tools
115 * libflite may forget to reference libasound
117 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
119 altos (0.6+164+g5c3b6e2) unstable; urgency=low
122 * Start adding java-based UI
123 * Add telemetry data parsing code
124 * Add Windows install .inf file
125 * Fix windows install file
126 * Add telem parsing code
127 * Steal C code from ao-view
128 * Display table of flight info. gps is not working yet though
129 * Fix up table formatting
132 * Clean up GPS data formatting
133 * Report current gps nsat, not last locked nsat
134 * Remove GPS data missing from skytraq. Save max height/accel/speed
135 * Remove unused cell renderer class
137 * Use RXTX for serial comm. Add logdir preference saving
138 * Make ao_radio_idle keep trying to get the radio to idle.
139 * Don't abort the radio when enabling telemetry monitoring
140 * Clean up some altosui comments
141 * Switch TeleMetrum from v0.2 to v1.0
142 * Add Linux device discovery
143 * Interrupt running replay thread when starting another replay
144 * serial port read function cannot be interrupted. poll every 1 second
145 * TD reports "not-connected" when GPS has 0 sats
146 * Tasks may move in task structure as a result of ao_exit
147 * Enable telemetry monitoring
148 * Use 16-bit flite voice (which appears to have changed symbols
150 * When changing RESET line, delay 20ms
153 * choose a better set of docbook xsl files
155 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
157 altos (0.6+131+g6629ec5) unstable; urgency=low
159 * lose the url entirely for now
161 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
163 altos (0.6+129+g934434f) unstable; urgency=low
167 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
169 altos (0.6+127+g05ad583) unstable; urgency=low
171 * need another build dep
173 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
175 altos (0.6+125+g8f1d47e) unstable; urgency=low
178 * tweak copyright assertion
179 * crudely incorporate "day in the life" info from web page
180 * rewrite urls in docbook format
182 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
184 altos (0.6+119+g00f49c8) unstable; urgency=low
187 * update changelogs for Debian build
188 * move gbp.conf into debian/
189 * initial harness for documentation
193 * Round radio calibration value instead of truncating
194 * Document the ao-dumplog '--remote' flag for radio-link downloads
196 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
198 altos (0.6+108+g6e61170) unstable; urgency=low
201 * Need to duplicate new altitude conversion code in aoview.
203 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
205 altos (0.6+106+ga1478f6) unstable; urgency=low
208 * Add ao_radio_xmit to help test boards without flashing them.
209 * Allow product names to have suffixes (like board revisions)
210 * Fix and document the ao-rawload --run flag
212 * Leave .ihx files in the build directory too - easier to debug that way
213 * Eliminate deadlock when writing config from radio link
214 * Fix up LED colors for each product.
215 * Add .gitignore for ao-bringup
218 * create a turn on script for lighting up TeleDongle v0.2 boards
220 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
222 altos (0.6+95+g2f45953) unstable; urgency=low
224 * update changelogs for Debian build
225 * conditionalize use of git on executability of /usr/bin/git binary
227 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
229 altos (0.6+88+gdeccc10) unstable; urgency=low
231 * add gawk as a build dependency since strtonum is a gawk extension
233 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
235 altos (0.6+86+g2491282) unstable; urgency=low
238 * Disable monitor mode before attempting radio test.
239 * Ensure that ao_alarm waits at least the specified time
240 * Remove dbg driver code from telemetrum/teledongle
241 * Add AT45DBxx1D driver
242 * Remove green LED and temp sensor from v0.2 code
243 * Add at45db161d.h header file for new flash part.
244 * Add 'f' command to display flash status register contents
245 * Dump more flash parameters for the flash_status command
246 * Dump config block from read/write config and flash_status commands
247 * Don't set ao_flash_setup_done until we're actually done.
248 * Remove flash debugging printfs
249 * Add simple gps dump command 'g'
250 * Force idle mode by shorting the SPI clock to ground at boot time.
251 * Switch to using internal cc1111 temperature sensor
252 * Missing ao_mutex_put in gps_dump
253 * Compute daytime using GPS as time base
254 * Pull in a bit more data for filtering the start of the boost
255 * Log GPS data on pad after boost detect.
256 * Change barometer conversion code to shrink conversion table
257 * Change altos build process to support per-product compile-time
259 * Update .gitignore files
261 * Add back stack size checking to altos linking phase
262 * Must install .map files for ao-load to work
264 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
266 altos (0.6+60+g10d1bbc) unstable; urgency=low
269 * Use ao_radio_get/ao_radio_put in packet code.
271 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
273 altos (0.6+58+gbbb152c) unstable; urgency=low
276 * Re-order config values. Change frequency to cal
277 * Allow radio calibration to be set from ao-load
278 * Add --cal to man page
280 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
282 altos (0.6+53+gcd49847) unstable; urgency=low
285 * Remove send_serial and serial_baud commands.
286 * Make ao_cmd_decimal produce both 32 and 16 bit values.
287 * Add radio calibration configuration.
289 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
291 altos (0.6+49+g9a1d7dd) unstable; urgency=low
294 * Change default callsign to "N0CALL"
296 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
298 altos (0.6+47+g4053309) unstable; urgency=low
300 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
301 * change home URL in control file to be the AltOS page
303 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
305 altos (0.6+43+gd6ba07e) unstable; urgency=low
308 * Decode HDOP data from skytraq GPS
309 * Document ao-postflight --gps and --kml options.
310 * Make ao-postflight create filenames using input filenames.
311 * Make TD print 0000-00-00 for invalid dates.
312 * Fix --plot arg handling. Add -all option.
313 * Convert telemetry file GPS satellite information in cc_log_read
314 * Don't crash if --plot isn't passed on ao-postflight command line
315 * ao-postflight: compute barometric alt for each GPS position
316 * ao-postflight: don't try to use missing gps sat data
317 * Automatically extract flight number for eeprom and telem filenames.
319 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
321 altos (0.6+32+g87e6f3e) unstable; urgency=low
324 * fix typo in comment
327 * Reduce igniter firing time from 500ms to 50ms.
328 * Add GPS date/time output to ao-postflight.
329 * Eliminate SiRF state values from ao-view.
331 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
333 altos (0.6+27+gb0d7e3f) unstable; urgency=low
336 * Add two-point accelerometer calibration.
337 * Remove "l" command as ao-dumplong no longer uses it
340 * Reformat ADC values to show all 16 bits
341 * ao_flight_test was using accel value for pressure too
342 * Pass accel calibration over telemetry stream. Telemetry data format
344 * Add ability to dump eeprom data over radio link.
345 * In packet master, move USB flush from packet thread to echo thread
346 * In USB pollchar, wait for packet before re-checking USB out len
347 * Explicitly use USB I/O routines in packet code
348 * Flush pending input when switching to remote packet mode
349 * Stop recording in ao-dumplog after receiving an invalid block
350 * Move ao_match_word from ao_ignite.c to ao_cmd.c
351 * Add Watchdog Timer Control register definitions
352 * Add reboot command.
353 * Return radio to telemetry settings when packet system closed.
354 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
355 * Loosen tolerances for main->landed transition
356 * Provide a dummy 'uninstall' target in the src directory.
357 * Share telemetry parsing code in cc library.
358 * Enable telemetry receive in ao_view
359 * Switch order of serial/flight in ao-postflight summary
360 * Add flight number to telemetry stream.
361 * Add date to GPS data, captured from GPRMC packet.
362 * Stop using SiRF state info.
364 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
366 altos (0.6) unstable; urgency=low
369 * Add support for the SkyTraq GPS unit
370 * Build two versions of TM, one for SiRF, one for SkyTraq
371 * Save some DSEG space by marking cmd functions __reentrant
372 * Add ao_wake_task and ao_exit
373 * Add keyhole-markup generation for ao-postflight.
374 * Initial packet bits. Just testing transmission
375 * Add radio carrier command
376 * Wait for TX to finish sending data
378 * Remove reason from ao_dma_abort
379 * Switch packet code from timer thread to ao_alarm
380 * Use ao_radio_done to wait for TX to completely finish with packet
381 * Send SYN packet to set sequence numbers
383 * Do more flushing in packet test code
384 * Use ao_alarm for ao_delay so it can be easily interrupted
385 * Poke master to speed up packet rate when things are busy
386 * No need to wakeup &ao_tick_count now
387 * Enable packet-based communcation to command processor
388 * Add more docs to the README file
389 * Disable interrupts while removing tasks from task list
390 * Add ao_usb_pollchar to ao.h
392 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
394 altos (0.5+90+g127c312) unstable; urgency=low
396 * de-version the libreadline-dev build dependency
398 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
400 altos (0.5+86+g2de548f) unstable; urgency=low
402 * automate push of updated and tagged master branch during
403 debian/rules prebuild
404 * flush repetitive junk out of debian/changelog, and update the
406 * add support for tagging git repository on each Debian package build
408 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
410 altos (0.5+77+gc57bd7f) unstable; urgency=low
412 * build for Debian from git
414 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600