| 2009-05-27 |
Bdale Garbee | eliminate beeper and temp sensor in favor of offboard...
|
commit | commitdiff | tree |
| 2009-04-22 |
Bdale Garbee | add connector for SPI channel to talk to companion...
|
commit | commitdiff | tree |
| 2009-03-30 |
Bdale Garbee | add a text note regarding R14/15, R21/22 values on...
|
commit | commitdiff | tree |
| 2009-03-27 |
Bdale Garbee | fix for igniter continuity sense, requires adding a...
|
commit | commitdiff | tree |
| 2009-03-24 |
Bdale Garbee | replace debug connector with a 5-pin Molex 1.25mm pitch...
|
commit | commitdiff | tree |
| 2009-03-18 |
Bdale Garbee | We need to be able to control the chip select input...
|
commit | commitdiff | tree |
| 2009-03-18 |
Bdale Garbee | capture Makefile changes before branching
|
commit | commitdiff | tree |
| 2009-03-01 |
Bdale Garbee | fix DigiKey part numbers on C7, C14, C15, and C16,...
|
commit | commitdiff | tree |
| 2009-03-01 |
Bdale Garbee | C8 had wrong DigiKey part number in metadata
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | argh, typo
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | updat DigiKey part numbers of 2 caps from 1206 to 0402...
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | open up clearances on the holes in the cc1111 footprint
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | holes in ground tab under CC1111 changed to solidly...
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | major update of CC1111 footprint to get mask and paste...
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | part and via shoves and other solder mask improvements...
|
commit | commitdiff | tree |
| 2008-12-24 |
Bdale Garbee | add gate resistors, and swap FET drain and source to...
|
commit | commitdiff | tree |
| 2008-12-24 |
Bdale Garbee | fix via mask clearance issues -- clean report from...
|
commit | commitdiff | tree |
| 2008-12-24 |
Bdale Garbee | fix for regexp problem when pcb is named
|
commit | commitdiff | tree |
| 2008-12-24 |
Bdale Garbee | panelization tools from DJ's directory on gedasymbols.org
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | adding more silkscreen labels
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | improve layout around CC1111 and get traces at least...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | freshen U5 footprint to better match measured part...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | fix bottom layer ground plane around SMA connector...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | updated netlist and pin names to match current schematic
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | ground plane around SMA connector corrected
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | mucho rework to fix accelerometer and SMA footprints...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | fix several mask clearance issues
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | keep traces farther away from mounting holes, just...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | tweaks identified during design review online with...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | improved SuperSOT3 footprints
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | pull planes back to 10 mils from pcb edges to avoid...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | fixes for DFM issues
|
commit | commitdiff | tree |
| 2008-12-21 |
Bdale Garbee | use v_lipo not 3.3V for input to the 5V charge-pump...
|
commit | commitdiff | tree |
| 2008-12-21 |
Bdale Garbee | add a pullup on the cc1111 RESET_N input even though...
|
commit | commitdiff | tree |
| 2008-12-21 |
Bdale Garbee | remove SMA connector from solder paste gerber layer
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | tweaks before putting out for broader review
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | change to 4-lead symbol for SMT crystal, and get the...
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | correct pin numbering on SOT23-5 footprint
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | add pin one spots in silkscreen for ICs that didn't...
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | update reference designators in pcb, and clean up resulting...
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | updated reference designators on schematic
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | add project name, copyright, and license assertion...
|
commit | commitdiff | tree |
| 2008-12-19 |
Bdale Garbee | no showstoppers in freedfm.com output any more
|
commit | commitdiff | tree |
| 2008-12-19 |
Bdale Garbee | fix up a couple pad and mask dimension issues
|
commit | commitdiff | tree |
| 2008-12-19 |
Bdale Garbee | add solder mask clearance holes for all vias, fix sma...
|
commit | commitdiff | tree |
| 2008-12-18 |
Bdale Garbee | restore footprint attributes for the FETs
|
commit | commitdiff | tree |
| 2008-12-18 |
Bdale Garbee | move temp sensor to avoid cp2103 debug interface when...
|
commit | commitdiff | tree |
| 2008-12-17 |
Bdale Garbee | add TAPR OHL license file
|
commit | commitdiff | tree |
| 2008-12-15 |
Bdale Garbee | passes DRC in pcb, sent out to freedfm.com for analysis
|
commit | commitdiff | tree |
| 2008-12-13 |
Bdale Garbee | dual ejection connector footprints, picoblade or screw...
|
commit | commitdiff | tree |
| 2008-12-11 |
Bdale Garbee | move to four mounting holes, vertical battery connector
|
commit | commitdiff | tree |
| 2008-12-11 |
Bdale Garbee | replaced serial connector with vertical through-hole...
|
commit | commitdiff | tree |
| 2008-12-11 |
Bdale Garbee | preparing to play some layout mind-games
|
commit | commitdiff | tree |
| 2008-12-08 |
Bdale Garbee | add test points to two unconnected pins, fix pin numbers...
|
commit | commitdiff | tree |
| 2008-12-08 |
Bdale Garbee | working on pcb layout, initial parts placement done
|
commit | commitdiff | tree |
| 2008-12-07 |
Bdale Garbee | rename project to 'telemetrum'
|
commit | commitdiff | tree |
| 2008-12-05 |
Bdale Garbee | tweaking footprints, etc, as we get close to starting...
|
commit | commitdiff | tree |
| 2008-12-05 |
Bdale Garbee | add attributes to the new charge pump chip
|
commit | commitdiff | tree |
| 2008-12-05 |
Bdale Garbee | sort reference designators in bill of materials
|
commit | commitdiff | tree |
| 2008-12-05 |
Bdale Garbee | switch 5V regulator to LTC part, use 33mA of its capacity...
|
commit | commitdiff | tree |
| 2008-12-04 |
Bdale Garbee | resequence ADC inputs to put highest rep rates on lowest...
|
commit | commitdiff | tree |
| 2008-12-04 |
Bdale Garbee | re-arrange pins to route both e-match sense lines to...
|
commit | commitdiff | tree |
| 2008-12-04 |
Bdale Garbee | changes in schematic inspired by PSAS design review...
|
commit | commitdiff | tree |
| 2008-11-30 |
Bdale Garbee | the MN5010HS needs more current than we can provide...
|
commit | commitdiff | tree |
| 2008-11-29 |
Bdale Garbee | change serial port to a 4-pin connector with 3.3VDC...
|
commit | commitdiff | tree |
| 2008-11-18 |
Bdale Garbee | snapshot before removing 18g accelerometer
|
commit | commitdiff | tree |
| 2008-11-18 |
Bdale Garbee | adding 50g accelerometer circuit back in
|
commit | commitdiff | tree |
| 2008-11-18 |
Bdale Garbee | snapshot before insertion
|
commit | commitdiff | tree |
| 2008-11-10 |
Bdale Garbee | DigiKey part numbers for everything, some footprints...
|
commit | commitdiff | tree |
| 2008-11-09 |
Bdale Garbee | functionally complete, perhaps? messy designators...
|
commit | commitdiff | tree |
| 2008-11-08 |
Bdale Garbee | cpu section more or less complete
|
commit | commitdiff | tree |
| 2008-11-08 |
Bdale Garbee | initial snapshot after moving out of openalt directory
|
commit | commitdiff | tree |
|
projects / hw / telemetrum / search