We need to be able to control the chip select input on the SPI EEPROM part.

To free up a gpio for this, we lose the ability to put the accel into self
test mode.  Change made to schematic only, title block updated for v0.2

diff --git a/telemetrum.sch b/telemetrum.sch
index cf5846bc29d74119b37cc14a21d928ee25313662..b3ad9a2f8627789480d36eedea31be1688c770b9 100644 (file)
--- a/telemetrum.sch
+++ b/telemetrum.sch
@@ -935,7 +935,7 @@ netname=c0
 N 61600 57600 62900 57600 4
 {
 T 61600 57700 5 10 1 1 0 0 1
-netname=accel_st
+netname=cs0
 }
 C 54700 44800 1 0 0 gnd-1.sym
 N 55000 45900 53900 45900 4
@@ -1031,7 +1031,7 @@ netname=led_red
 }
 N 59700 58400 59700 57600 4
 T 82400 40400 9 10 1 0 0 0 1
-0.1
+0.2
 T 80000 40400 9 10 1 0 0 0 1
 1
 T 80600 40400 9 10 1 0 0 0 1
@@ -1115,8 +1115,6 @@ C 48800 48400 1 0 0 3.3V-plus-1.sym
 C 48900 44600 1 0 0 gnd-1.sym
 N 49000 48400 50200 48400 4
 N 50200 47300 50200 48400 4
-N 50200 45700 50200 44900 4
-N 50200 44900 49000 44900 4
 C 53100 67100 1 0 0 gnd-1.sym
 C 56000 67300 1 90 0 capacitor.sym
 {
@@ -1301,11 +1299,6 @@ digikey=RMCF1/16S10K1%RCT-ND
 }
 C 45400 50500 1 0 0 gnd-1.sym
 C 45400 48700 1 0 0 gnd-1.sym
-N 51700 68300 50800 68300 4
-{
-T 50800 68400 5 10 1 1 0 0 1
-netname=accel_st
-}
 N 55000 48300 54800 48300 4
 N 54800 45100 55000 45100 4
 T 56000 44800 9 10 1 0 0 0 3
@@ -1616,3 +1609,11 @@ digikey=P100JCT-ND
 }
 N 46800 51700 47200 51700 4
 N 46800 49900 47200 49900 4
+N 51700 68300 51400 68300 4
+N 51400 68300 51400 67400 4
+N 51400 67400 53200 67400 4
+N 50200 45700 51000 45700 4
+{
+T 50700 45800 5 10 1 1 0 0 1
+netname=cs0
+}