| 2009-11-07 |
Bdale Garbee | change pyro battery to 2-pin 2mm connector just like...
|
commit | commitdiff | tree |
| 2009-11-04 |
Bdale Garbee | sigh
|
commit | commitdiff | tree |
| 2009-11-03 |
Bdale Garbee | change pyro battery connector to 3-pin picoblade to...
|
commit | commitdiff | tree |
| 2009-11-03 |
Bdale Garbee | cleaning things up, particularly back side silk screen...
|
commit | commitdiff | tree |
| 2009-11-02 |
Bdale Garbee | board routed, many DRC issues resolved, some remain
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | pcb routed, but various drc errors still exist
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | oops, fix duplicate refdes on new cap
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | add 1uF bypass cap adjacent to new ldo output as per...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | change 3.3V LDO to a 100mA CMOS part to support GPS...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | rename telemetrum.bom to partslist to avoid conflict...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | note name conflict between my .bom file and PCB export...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | add datasheets and other relevant misc files to git...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | snapshot work in progress on v0.2
|
commit | commitdiff | tree |
| 2009-10-30 |
Bdale Garbee | snapshot, on 777 between KIX and SFO
|
commit | commitdiff | tree |
| 2009-10-24 |
Bdale Garbee | change schematic to use Skytraq Venus GPS modules as...
|
commit | commitdiff | tree |
| 2009-10-23 |
Bdale Garbee | snapshot of work in process
|
commit | commitdiff | tree |
| 2009-10-22 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2009-10-12 |
Bdale Garbee | work in process on revising the pcb artwork for v0.2
|
commit | commitdiff | tree |
| 2009-10-11 |
Bdale Garbee | tweaking
|
commit | commitdiff | tree |
| 2009-10-11 |
Bdale Garbee | updating schematic to capture current thinking towards...
|
commit | commitdiff | tree |
| 2009-10-10 |
Bdale Garbee | revert pcb artwork to v0.1 for now
|
commit | commitdiff | tree |
| 2009-10-10 |
Bdale Garbee | restored beeper replacing one LED, numerous small changes
|
commit | commitdiff | tree |
| 2009-10-10 |
Bdale Garbee | pondering TP guts and such in Notebook file
|
commit | commitdiff | tree |
| 2009-09-15 |
Bdale Garbee | DigiKey orders
|
commit | commitdiff | tree |
| 2009-08-25 |
Bdale Garbee | placed another DigiKey parts order
|
commit | commitdiff | tree |
| 2009-08-25 |
Bdale Garbee | PCB changes to account for FET swap
|
commit | commitdiff | tree |
| 2009-08-25 |
Bdale Garbee | move from FDN335N discrete FETs to FDS9926A dual FET...
|
commit | commitdiff | tree |
| 2009-08-06 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
| 2009-06-30 |
Bdale Garbee | document gps default settings with a text note
|
commit | commitdiff | tree |
| 2009-06-30 |
Bdale Garbee | make gps default be 4k8 NMEA just like SF board, since...
|
commit | commitdiff | tree |
| 2009-06-03 |
Bdale Garbee | add a silk screen block near the GPS antenna for recording...
|
commit | commitdiff | tree |
| 2009-06-02 |
Bdale Garbee | clear out planes under the GPS antenna
|
commit | commitdiff | tree |
| 2009-06-02 |
Bdale Garbee | working on layout with GPS ... add 0.25 inches to length...
|
commit | commitdiff | tree |
| 2009-06-02 |
Bdale Garbee | work in progress on schematics and notes for version...
|
commit | commitdiff | tree |
| 2009-06-01 |
Bdale Garbee | add J7 serial connector back in as optional, fix pinout...
|
commit | commitdiff | tree |
| 2009-06-01 |
Bdale Garbee | capture Notebook in git, add SMA option to GPS receiver
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | fix all DRC issues
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | embed all the parts
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | added GPS receiver ... not all part attributes present yet
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | everything on the post-Mayhem to-do list except adding...
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | eliminate beeper and temp sensor in favor of offboard...
|
commit | commitdiff | tree |
| 2009-04-22 |
Bdale Garbee | add connector for SPI channel to talk to companion...
|
commit | commitdiff | tree |
| 2009-03-30 |
Bdale Garbee | add a text note regarding R14/15, R21/22 values on...
|
commit | commitdiff | tree |
| 2009-03-27 |
Bdale Garbee | fix for igniter continuity sense, requires adding a...
|
commit | commitdiff | tree |
| 2009-03-24 |
Bdale Garbee | replace debug connector with a 5-pin Molex 1.25mm pitch...
|
commit | commitdiff | tree |
| 2009-03-18 |
Bdale Garbee | We need to be able to control the chip select input...
|
commit | commitdiff | tree |
| 2009-03-18 |
Bdale Garbee | capture Makefile changes before branching
|
commit | commitdiff | tree |
| 2009-03-01 |
Bdale Garbee | fix DigiKey part numbers on C7, C14, C15, and C16,...
|
commit | commitdiff | tree |
| 2009-03-01 |
Bdale Garbee | C8 had wrong DigiKey part number in metadata
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | argh, typo
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | updat DigiKey part numbers of 2 caps from 1206 to 0402...
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | open up clearances on the holes in the cc1111 footprint
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | holes in ground tab under CC1111 changed to solidly...
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | major update of CC1111 footprint to get mask and paste...
|
commit | commitdiff | tree |
| 2008-12-26 |
Bdale Garbee | part and via shoves and other solder mask improvements...
|
commit | commitdiff | tree |
| 2008-12-24 |
Bdale Garbee | add gate resistors, and swap FET drain and source to...
|
commit | commitdiff | tree |
| 2008-12-24 |
Bdale Garbee | fix via mask clearance issues -- clean report from...
|
commit | commitdiff | tree |
| 2008-12-24 |
Bdale Garbee | fix for regexp problem when pcb is named
|
commit | commitdiff | tree |
| 2008-12-24 |
Bdale Garbee | panelization tools from DJ's directory on gedasymbols.org
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | adding more silkscreen labels
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | improve layout around CC1111 and get traces at least...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | freshen U5 footprint to better match measured part...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | fix bottom layer ground plane around SMA connector...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | updated netlist and pin names to match current schematic
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | ground plane around SMA connector corrected
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | mucho rework to fix accelerometer and SMA footprints...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | fix several mask clearance issues
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | keep traces farther away from mounting holes, just...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | tweaks identified during design review online with...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | improved SuperSOT3 footprints
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | pull planes back to 10 mils from pcb edges to avoid...
|
commit | commitdiff | tree |
| 2008-12-23 |
Bdale Garbee | fixes for DFM issues
|
commit | commitdiff | tree |
| 2008-12-21 |
Bdale Garbee | use v_lipo not 3.3V for input to the 5V charge-pump...
|
commit | commitdiff | tree |
| 2008-12-21 |
Bdale Garbee | add a pullup on the cc1111 RESET_N input even though...
|
commit | commitdiff | tree |
| 2008-12-21 |
Bdale Garbee | remove SMA connector from solder paste gerber layer
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | tweaks before putting out for broader review
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | change to 4-lead symbol for SMT crystal, and get the...
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | correct pin numbering on SOT23-5 footprint
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | add pin one spots in silkscreen for ICs that didn't...
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | update reference designators in pcb, and clean up resulting...
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | updated reference designators on schematic
|
commit | commitdiff | tree |
| 2008-12-20 |
Bdale Garbee | add project name, copyright, and license assertion...
|
commit | commitdiff | tree |
| 2008-12-19 |
Bdale Garbee | no showstoppers in freedfm.com output any more
|
commit | commitdiff | tree |
| 2008-12-19 |
Bdale Garbee | fix up a couple pad and mask dimension issues
|
commit | commitdiff | tree |
| 2008-12-19 |
Bdale Garbee | add solder mask clearance holes for all vias, fix sma...
|
commit | commitdiff | tree |
| 2008-12-18 |
Bdale Garbee | restore footprint attributes for the FETs
|
commit | commitdiff | tree |
| 2008-12-18 |
Bdale Garbee | move temp sensor to avoid cp2103 debug interface when...
|
commit | commitdiff | tree |
| 2008-12-17 |
Bdale Garbee | add TAPR OHL license file
|
commit | commitdiff | tree |
| 2008-12-15 |
Bdale Garbee | passes DRC in pcb, sent out to freedfm.com for analysis
|
commit | commitdiff | tree |
| 2008-12-13 |
Bdale Garbee | dual ejection connector footprints, picoblade or screw...
|
commit | commitdiff | tree |
| 2008-12-11 |
Bdale Garbee | move to four mounting holes, vertical battery connector
|
commit | commitdiff | tree |
| 2008-12-11 |
Bdale Garbee | replaced serial connector with vertical through-hole...
|
commit | commitdiff | tree |
| 2008-12-11 |
Bdale Garbee | preparing to play some layout mind-games
|
commit | commitdiff | tree |
| 2008-12-08 |
Bdale Garbee | add test points to two unconnected pins, fix pin numbers...
|
commit | commitdiff | tree |
| 2008-12-08 |
Bdale Garbee | working on pcb layout, initial parts placement done
|
commit | commitdiff | tree |
| 2008-12-07 |
Bdale Garbee | rename project to 'telemetrum'
|
commit | commitdiff | tree |
| 2008-12-05 |
Bdale Garbee | tweaking footprints, etc, as we get close to starting...
|
commit | commitdiff | tree |
| 2008-12-05 |
Bdale Garbee | add attributes to the new charge pump chip
|
commit | commitdiff | tree |
| 2008-12-05 |
Bdale Garbee | sort reference designators in bill of materials
|
commit | commitdiff | tree |
| 2008-12-05 |
Bdale Garbee | switch 5V regulator to LTC part, use 33mA of its capacity...
|
commit | commitdiff | tree |
| next |
projects / hw / telemetrum / search