Add initial rfq words

diff --git a/rfq b/rfq
new file mode 100644 (file)
index 0000000..343ac11
--- /dev/null
+++ b/rfq
@@ -0,0 +1,61 @@
+Hi Laura, Kim,
+
+This is a request for quote on raw boards and partial turnkey assembly of
+TeleFire 1.0 and TeleLCO 1.0. We're planning on running this pair of
+products through 'kickstarter', which means we would set a minimum order
+size, but the order could end up larger than that. I think we'll need to
+have quotes for 10, 25, 50 of each board to help set the pricing in
+the campaign.
+
+Kim, like some of our other products, this one has a notch in one side to 
+allow a micro USB connector to overhang the board edge.  As a result, these
+need to be tab-routed.  We have no discussed optimal panelization for a board
+of this geometry before, so please let me know what a good arrangement would
+be if we want to build these in lots of 100'ish.  My latest FreeDFM run 
+resulted in quote 3956159. We'll want to run these in standard spec with
+the cheapest option which I think is 5 days.
+
+Laura, the new BOM is attached, and the XYRS data is in the
+telefire.xy and telelco.xy files in the zips.  As usual will provide
+some hard to find parts and want you to turnkey the rest.  We're quite
+cost sensitive for these, so whatever the cheapest assembly turn
+should be fine.
+
+From the standard data request for assembly quotes:
+
+     Company Name:              Altus Metrum, LLC
+
+     Contact Name:              Keith Packard
+
+     Phone:                     503 245 6878
+
+     Part Number:               TeleFire and TeleLCO
+
+     Revision:                  both 1.0
+
+     How many to assemble:      10, 25 or 50
+
+     PCB dimensions:            TeleFire is 4.00 x 4.00.
+                               TeleLCO is 4.50  x 3.75
+
+     How parts acquired:        partial turnkey
+
+                                 I will provide J3 for TeleFire and
+                                 J5 for TeleLCO
+
+     Parts both sides?:         no 
+                                       all SMT is on one side, and 
+                                       all TH parts are no-loads
+
+     ROHS?:                     no
+
+     ITAR?:                     no 
+
+Assembly notes:
+
+       None.
+
+Please let me know if I've forgotten anything, and thanks in advance for
+your help!
+
+Keith