Bdale Garbee [Thu, 4 May 2017 22:09:48 +0000 (16:09 -0600)]
move to 400mA LiPo charge current (R35 2.49k)
Bdale Garbee [Tue, 25 Apr 2017 23:08:46 +0000 (17:08 -0600)]
reduce attributes in schematic to use preferred parts, forward annotate pcb
Bdale Garbee [Thu, 13 Apr 2017 19:54:35 +0000 (13:54 -0600)]
attribute changes based on parts used for prototypes
Bdale Garbee [Wed, 15 Feb 2017 07:40:49 +0000 (00:40 -0700)]
add another via, update silk to reflect 2017 and beta status
Bdale Garbee [Thu, 22 Dec 2016 23:27:51 +0000 (16:27 -0700)]
route complete, drc clean
Bdale Garbee [Wed, 21 Dec 2016 21:42:52 +0000 (14:42 -0700)]
lose the resistor on boot0
Bdale Garbee [Thu, 15 Dec 2016 21:26:16 +0000 (14:26 -0700)]
manual is confused about cts
Bdale Garbee [Thu, 15 Dec 2016 21:17:48 +0000 (14:17 -0700)]
hook up the rest of the useful bt module pins
Bdale Garbee [Thu, 15 Dec 2016 19:19:54 +0000 (12:19 -0700)]
snapshot of work in progress for keithp to see
Bdale Garbee [Sun, 11 Dec 2016 08:08:20 +0000 (01:08 -0700)]
possibly complete schematic?
Bdale Garbee [Thu, 1 Dec 2016 06:44:28 +0000 (23:44 -0700)]
Rayson BT module replaced with Microchip BTle module, calling it v4.0
Bdale Garbee [Fri, 1 Jul 2016 17:30:42 +0000 (19:30 +0200)]
notes about building a BTle version
Bdale Garbee [Wed, 14 Oct 2015 20:06:16 +0000 (14:06 -0600)]
regularize DEVICE in attributes data
Bdale Garbee [Wed, 14 Oct 2015 19:50:02 +0000 (13:50 -0600)]
update Makefile to centralized version
Bdale Garbee [Wed, 14 Oct 2015 19:46:36 +0000 (13:46 -0600)]
update attribs file for preferred parts extraction
Bdale Garbee [Sun, 21 Jun 2015 00:48:14 +0000 (18:48 -0600)]
add more attributes, elide 'unknown' in partslist.csv
Bdale Garbee [Sun, 21 Jun 2015 00:37:01 +0000 (18:37 -0600)]
add metadata for parts Bdale will provide to AC
Bdale Garbee [Sun, 21 Jun 2015 00:31:37 +0000 (18:31 -0600)]
add mfg_part_number to satisfy AC assembly quoting rules
Bdale Garbee [Sun, 21 Jun 2015 00:31:14 +0000 (18:31 -0600)]
fix gerber list for zip to reflect flipping board upside down
Bdale Garbee [Mon, 15 Jun 2015 23:02:34 +0000 (17:02 -0600)]
update bom to reflect part availability
Bdale Garbee [Thu, 11 Jun 2015 05:28:05 +0000 (23:28 -0600)]
forward-annotate resistor value change
Bdale Garbee [Thu, 11 Jun 2015 05:25:16 +0000 (23:25 -0600)]
change to version 3.0 to match TeleDongle
Bdale Garbee [Fri, 30 Jan 2015 19:09:04 +0000 (12:09 -0700)]
harmonize 0.1uF capacitor vendor part numbers
Bdale Garbee [Fri, 30 Jan 2015 19:04:15 +0000 (12:04 -0700)]
use 1k for all LED current limit resistors
Bdale Garbee [Fri, 30 Jan 2015 19:04:00 +0000 (12:04 -0700)]
add prototyping targets to Makefile
Bdale Garbee [Mon, 5 Jan 2015 06:33:21 +0000 (23:33 -0700)]
lose the refdes for the mounting holes, too
Bdale Garbee [Mon, 5 Jan 2015 06:31:37 +0000 (23:31 -0700)]
add oshpark target to Makefile, lose refdes from the silk
Bdale Garbee [Mon, 5 Jan 2015 06:23:57 +0000 (23:23 -0700)]
we moved to shared symbol library a while back .. clean up local mess
Bdale Garbee [Mon, 5 Jan 2015 05:32:03 +0000 (22:32 -0700)]
route complete, drc clean
Bdale Garbee [Wed, 31 Dec 2014 06:37:42 +0000 (23:37 -0700)]
more work on placement, pin swaps to improve routing
Bdale Garbee [Tue, 30 Dec 2014 22:50:55 +0000 (15:50 -0700)]
fix BTM-182 pin 32
Bdale Garbee [Tue, 30 Dec 2014 22:40:38 +0000 (15:40 -0700)]
old traces cleaned up, silk updated to reflect version and year
Bdale Garbee [Tue, 30 Dec 2014 22:32:53 +0000 (15:32 -0700)]
add power and ground plane polygons
Bdale Garbee [Tue, 30 Dec 2014 22:31:16 +0000 (15:31 -0700)]
expand working area to hold new parts, ran 'make pcb'
Bdale Garbee [Tue, 30 Dec 2014 22:28:48 +0000 (15:28 -0700)]
move PCB to TeleMega-compatible 4-layer stack
Bdale Garbee [Tue, 30 Dec 2014 22:22:53 +0000 (15:22 -0700)]
TeleBT v1.1 PCB layout, flipped with help from DJ's tool
Bdale Garbee [Mon, 29 Dec 2014 00:05:05 +0000 (17:05 -0700)]
lose the wire whip not, it's not relevant here
Bdale Garbee [Sun, 28 Dec 2014 23:39:44 +0000 (16:39 -0700)]
move to updated cc1200 symbol, clean up some trace overlaps
Bdale Garbee [Sun, 28 Dec 2014 17:48:29 +0000 (10:48 -0700)]
flesh out remaining explicit NCs, etc
Bdale Garbee [Sun, 28 Dec 2014 17:28:03 +0000 (10:28 -0700)]
more progress on artwork
Bdale Garbee [Sun, 28 Dec 2014 09:02:26 +0000 (02:02 -0700)]
work in progress
Bdale Garbee [Sun, 28 Dec 2014 08:48:41 +0000 (01:48 -0700)]
working on v2.0
Bdale Garbee [Sun, 28 Dec 2014 05:45:26 +0000 (22:45 -0700)]
update to use merged meta files
Bdale Garbee [Sun, 28 Jul 2013 16:51:01 +0000 (10:51 -0600)]
a couple more copper tweaks
Bdale Garbee [Fri, 19 Jul 2013 15:18:34 +0000 (09:18 -0600)]
merge Rayson datasheets to shared repo, elide the rest
Bdale Garbee [Thu, 11 Jul 2013 05:34:40 +0000 (01:34 -0400)]
update Notebook file
Bdale Garbee [Thu, 11 Jul 2013 05:23:29 +0000 (01:23 -0400)]
update pcb to reflect removal of flash part from design
Keith Packard [Thu, 11 Jul 2013 05:12:43 +0000 (22:12 -0700)]
Remove partslist.dk and partslist.mouser with 'make clean'
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jul 2013 05:09:30 +0000 (22:09 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/telebt
Signed-off-by: Keith Packard <keithp@keithp.com>
Conflicts:
telebt.sch
Keith Packard [Thu, 11 Jul 2013 05:08:15 +0000 (22:08 -0700)]
Reroute debug traces
Just make them cleaner
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 11 Jul 2013 05:07:59 +0000 (22:07 -0700)]
Add partslist.dk and partslist.mouser generation to Maekfile
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 11 Jul 2013 05:07:42 +0000 (01:07 -0400)]
lose the flash part entirely, since we don't load it
Keith Packard [Thu, 11 Jul 2013 05:07:39 +0000 (22:07 -0700)]
Remove trailing whitespace on vendor part numbers
this makes the DK generation script happy
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 11 Jul 2013 03:53:04 +0000 (23:53 -0400)]
update version to 1.1
Bdale Garbee [Thu, 11 Jul 2013 03:52:07 +0000 (23:52 -0400)]
route complete, no drc errors, kind of ugly around the MicroMatch connectors
Bdale Garbee [Thu, 11 Jul 2013 03:20:09 +0000 (23:20 -0400)]
rotate debug and companion connectors for proper cable dressing off board
Bdale Garbee [Fri, 1 Mar 2013 21:19:02 +0000 (14:19 -0700)]
fix cut'n'paste error in R5 part number caught by AC during quoting
Bdale Garbee [Wed, 27 Feb 2013 19:45:25 +0000 (12:45 -0700)]
move switch inboard 75 mils, clean up a few resulting copper oddities
Bdale Garbee [Wed, 27 Feb 2013 19:31:19 +0000 (12:31 -0700)]
lose the beeper
Bdale Garbee [Wed, 27 Feb 2013 17:50:20 +0000 (10:50 -0700)]
make FreeDFM happy by expanding guide pin annular ring a tiny bit
Bdale Garbee [Wed, 27 Feb 2013 17:40:44 +0000 (10:40 -0700)]
no locking ears on companion connector, Mouser has cheaper connectors today
Bdale Garbee [Wed, 27 Feb 2013 04:55:21 +0000 (21:55 -0700)]
more parts substitutions after checking Digi-Key stock levels
Bdale Garbee [Wed, 27 Feb 2013 04:39:45 +0000 (21:39 -0700)]
update parts selections to reflect current stock and lower BOM cost
Bdale Garbee [Mon, 25 Feb 2013 20:24:20 +0000 (13:24 -0700)]
change version from 0.3 to 1.0, update copyright year to 2013
Bdale Garbee [Thu, 7 Feb 2013 03:44:34 +0000 (22:44 -0500)]
conn-6.sys no longer relevant
Bdale Garbee [Thu, 7 Feb 2013 03:35:04 +0000 (22:35 -0500)]
move to use of shared scheme directory
Bdale Garbee [Thu, 7 Feb 2013 03:32:41 +0000 (22:32 -0500)]
mark beeper and flash memory as noload for production build
Bdale Garbee [Wed, 19 Dec 2012 16:10:19 +0000 (09:10 -0700)]
update loadstatus attributes for LDO bypass cap and power switch
Bdale Garbee [Tue, 11 Dec 2012 16:55:26 +0000 (09:55 -0700)]
move to local copy of partslistgag script
Bdale Garbee [Tue, 30 Oct 2012 03:11:01 +0000 (21:11 -0600)]
more make goodness
Bdale Garbee [Sat, 29 Sep 2012 22:52:34 +0000 (16:52 -0600)]
move to a slight variation on my new SMA edge connector, adjust silk
Bdale Garbee [Sat, 29 Sep 2012 22:27:23 +0000 (16:27 -0600)]
change to W25Q64 8-megabyte flash part
Bdale Garbee [Thu, 22 Mar 2012 22:16:37 +0000 (23:16 +0100)]
shove the power switch in a few more mils, minor tweaks
Bdale Garbee [Thu, 22 Mar 2012 21:59:33 +0000 (22:59 +0100)]
move to 3.00 volt version of the reset controller
Bdale Garbee [Sun, 11 Mar 2012 05:32:57 +0000 (22:32 -0700)]
more symbols
Bdale Garbee [Sun, 11 Mar 2012 05:29:43 +0000 (22:29 -0700)]
fix schematic version
Bdale Garbee [Sun, 11 Mar 2012 04:41:29 +0000 (21:41 -0700)]
let pcb rewrite the file after hacking the plane extents with text editor
Bdale Garbee [Sun, 11 Mar 2012 04:26:30 +0000 (21:26 -0700)]
major rework .. better battery charger, lots of copper improvement
Bdale Garbee [Wed, 12 Oct 2011 04:23:49 +0000 (22:23 -0600)]
lose the disconnected cs1 notation on the companion connector
Bdale Garbee [Wed, 12 Oct 2011 04:23:20 +0000 (22:23 -0600)]
back vs bottom
Bdale Garbee [Tue, 13 Sep 2011 07:49:07 +0000 (01:49 -0600)]
add symbol for switch
Bdale Garbee [Tue, 13 Sep 2011 06:05:15 +0000 (00:05 -0600)]
add Altus Metrum graphic to silk
Bdale Garbee [Mon, 12 Sep 2011 23:43:47 +0000 (17:43 -0600)]
widen the SMA notch so that we more more flexibility about mill diameter
Bdale Garbee [Mon, 12 Sep 2011 17:28:15 +0000 (11:28 -0600)]
turn solder paste off on SMA footprint since it's added post-reflow
Bdale Garbee [Mon, 12 Sep 2011 03:38:09 +0000 (21:38 -0600)]
fix errant boundary line
Bdale Garbee [Sat, 2 Jul 2011 22:18:32 +0000 (16:18 -0600)]
another ground plane improvement
Bdale Garbee [Sat, 2 Jul 2011 21:43:39 +0000 (15:43 -0600)]
much cleaning up of copper, no more traces breaking up the RF ground plane
Bdale Garbee [Sat, 2 Jul 2011 08:47:48 +0000 (02:47 -0600)]
route complete, no drc errors
Bdale Garbee [Sat, 2 Jul 2011 07:25:58 +0000 (01:25 -0600)]
we don't need the pull-up resistors on the serial lines
Bdale Garbee [Fri, 1 Jul 2011 22:36:54 +0000 (16:36 -0600)]
snapshot work to date .. not quite fully routed, not happy yet
Bdale Garbee [Sat, 11 Jun 2011 04:14:14 +0000 (22:14 -0600)]
shove parts around to get the switch set back suitably from the board edge
Bdale Garbee [Fri, 10 Jun 2011 23:29:15 +0000 (17:29 -0600)]
strip silkscreen from the USB micro B connector, and shove it right up to the
edge of the board, so that it will project maximally through plastic box wall
Bdale Garbee [Wed, 8 Jun 2011 02:55:52 +0000 (20:55 -0600)]
notch the board edge to account for SMA bulkhead thickness
use both poles of the power switch
Bdale Garbee [Tue, 7 Jun 2011 20:04:25 +0000 (14:04 -0600)]
initial work on a rotated placement .. lots still to do
Bdale Garbee [Wed, 11 May 2011 01:20:09 +0000 (19:20 -0600)]
fix the led net name to match the blue led color
Bdale Garbee [Tue, 26 Apr 2011 00:24:15 +0000 (18:24 -0600)]
tweak board dimensions down to match outline
Bdale Garbee [Fri, 22 Apr 2011 06:14:22 +0000 (00:14 -0600)]
meet minimum silk line dimension on beeper circle
Bdale Garbee [Fri, 22 Apr 2011 06:11:20 +0000 (00:11 -0600)]
fix soldermask clearance on sma footprint
Bdale Garbee [Fri, 22 Apr 2011 06:08:20 +0000 (00:08 -0600)]
meet min annular ring dimension spec on mounting holes since they're plated
Bdale Garbee [Thu, 21 Apr 2011 23:52:23 +0000 (17:52 -0600)]
fix targets so make zip works