hw/micropeak
2012-10-02 Keith PackardFreeDFM fixups v0.3
2012-10-02 Keith PackardMore copper shuffling
2012-10-02 Keith PackardClean up PCB a bit
2012-10-02 Keith PackardAdd datasheet for the power switch
2012-10-01 Keith PackardLabel the power switch positions 0 and 1
2012-10-01 Keith PackardAdd a power switch.
2012-10-01 Keith PackardMove R1 S to keep it away from D1's other pad
2012-09-30 Keith PackardMove R1 back in place logging
2012-09-30 Keith PackardRemove EEPROM. Switch LEDs.
2012-09-30 Keith PackardFlip MISO/MOSI around. origin/logging
2012-09-30 Keith PackardAdd datasheets
2012-09-30 Keith PackardAdd LED datasheet
2012-09-28 Keith PackardCorrect at24c512 I2C pins
2012-09-28 Keith PackardAdd resistor from MS5611 MISO pin
2012-09-21 Keith PackardAdd I2C pull-ups
2012-09-20 Keith PackardPush ms5611 bypass cap out of the way.
2012-09-20 Keith PackardClean up the CPU bypass cap connections
2012-09-19 Keith PackardAdd 64kB flash for data logging
2012-09-19 Keith PackardClean up ground plane on the back side of the board
2012-09-17 Keith PackardTie mounting holes to VCC
2012-09-14 Keith PackardBattery holder has + on the metal part and - on the...
2012-09-11 Keith PackardSwitch to new PCB version. Fix DRC issue.
2012-09-11 Keith PackardGenerate .zip file more cleanly
2012-09-11 Keith PackardMove component labels well off board. v0.2
2012-09-04 Keith PackardMove programming connector nearly off board. Add logo
2012-09-04 Keith PackardIgnore built files
2012-08-23 Keith PackardUse 6-pin header for AVR programming
2012-08-21 Keith PackardRename nRESET net as \_reset\_ so it looks nicer in...
2012-08-21 Keith PackardClean up a few traces, nothing huge.
2012-08-17 Keith PackardBump revision number to 0.2
2012-08-17 Keith PackardSwitch to 5-pin debug connector
2012-08-16 Keith PackardShuffle U1 bypass cap over
2012-08-16 Keith PackardIncrease clearance around MO-220 pads
2012-08-15 Keith PackardFlood top with ground. Fix clearance around pico-ezmate.
2012-08-15 Keith PackardShuffle things around to make room for a fourth hole
2012-08-13 Keith PackardSwitch to blue LED. Use available TDK 4.7uF capacitor v0.1
2012-08-13 Keith PackardFix H1 and H2 to match H3
2012-08-13 Keith PackardAdd some text to the silk
2012-08-13 Keith PackardAdd another hole
2012-08-13 Keith PackardMove H2 text to center of H2
2012-08-13 Keith PackardIncrease solder mask clearance around pico-ezmate pads
2012-08-13 Keith PackardUse the ATMEL QFN appnote AT88RF1354 to build a more...
2012-08-13 Keith PackardAdd baro datasheet
2012-08-13 Keith PackardSwitch from picoblade to pico ezmate
2012-08-12 Keith PackardAdd holes. Eliminate vias under baro sensor.
2012-08-12 Keith PackardAdd retab to format partslist
2012-08-12 Keith PackardImport new MicroPeak project