Add another hole

Reduces weight, makes for another possible mounting option. All good.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/micropeak.pcb b/micropeak.pcb
index 9ef73b37f808b5c58bd379e22ce9b1eb3a2eeaa0..65ed245f9777c86828c98a91308fe54c2bc08e00 100644 (file)
--- a/micropeak.pcb
+++ b/micropeak.pcb
@@ -6,7 +6,7 @@ FileVersion[20070407]
 PCB["MicroPeak" 70000 56000]
 
 Grid[100.0 0 0 0]
-Cursor[1100 1400 0.000000]
+Cursor[11700 56000 0.000000]
 PolyArea[200000000.000000]
 Thermal[0.500000]
 DRC[500 1000 500 500 1500 650]
@@ -889,24 +889,6 @@ Element["" "MS5611" "U2" "unknown" 51900 12200 -16961 -10811 0 100 ""]
 
        )
 
-Element["" "pico-ezmate-2" "J1" "unknown" 17100 28000 5951 -8869 0 100 ""]
-(
-       Pad[-492 -2362 492 -2362 2362 500 2962 "1" "1" "square,edge2"]
-       Pad[-492 2362 492 2362 2362 500 2962 "2" "2" "square,edge2"]
-       Pad[-14961 9252 -14567 9252 2756 500 3356 "GND" "GND" "square"]
-       Pad[-14961 -9252 -14567 -9252 2756 500 3356 "GND" "GND" "square"]
-       ElementLine [1000 -11000 1000 -3600 100]
-       ElementLine [1000 3600 1000 11000 100]
-       ElementLine [-17000 11000 1000 11000 100]
-       ElementLine [-17000 6000 -17000 11000 100]
-       ElementLine [-17000 6000 -15000 4000 100]
-       ElementLine [-15000 -4000 -15000 4000 100]
-       ElementLine [-15000 -4000 -17000 -6000 100]
-       ElementLine [-17000 -11000 -17000 -6000 100]
-       ElementLine [-17000 -11000 1000 -11000 100]
-
-       )
-
 Element["" "MO-220" "U1" "unknown" 52500 35300 -10300 -11000 0 100 ""]
 (
        Pad[0 0 0 0 10236 0 0 "pin21" "21" "square,nopaste"]
@@ -946,6 +928,31 @@ Element["" "MO-220" "U1" "unknown" 52500 35300 -10300 -11000 0 100 ""]
        Pad[-7912 3937 -6653 3937 906 1063 1457 "pin20" "20" ""]
        ElementArc [-7873 7874 500 500 0 360 1000]
 
+       )
+
+Element["" "hole-M2.5" "H3" "unknown" 8500 8500 -3000 -3100 0 100 ""]
+(
+       Pin[0 0 11000 2000 11000 9800 "pin1" "1" "usetherm,thermal(1S)"]
+       ElementArc [0 0 8000 8000 0 360 1000]
+
+       )
+
+Element["selected" "pico-ezmate-2" "J1" "unknown" 17100 28000 2000 -9600 0 100 ""]
+(
+       Pad[-492 -2362 492 -2362 2362 500 2962 "1" "1" "square,edge2"]
+       Pad[-492 2362 492 2362 2362 500 2962 "2" "2" "square,edge2"]
+       Pad[-14961 9252 -14567 9252 2756 500 3356 "GND" "GND" "square"]
+       Pad[-14961 -9252 -14567 -9252 2756 500 3356 "GND" "GND" "square"]
+       ElementLine [1000 -11000 1000 -3600 100]
+       ElementLine [1000 3600 1000 11000 100]
+       ElementLine [-17000 11000 1000 11000 100]
+       ElementLine [-17000 6000 -17000 11000 100]
+       ElementLine [-17000 6000 -15000 4000 100]
+       ElementLine [-15000 -4000 -15000 4000 100]
+       ElementLine [-15000 -4000 -17000 -6000 100]
+       ElementLine [-17000 -11000 -17000 -6000 100]
+       ElementLine [-17000 -11000 1000 -11000 100]
+
        )
 Layer(1 "top")
 (

diff --git a/micropeak.sch b/micropeak.sch
index 7845ba70aa739aa59af45ad35f20025da8ef6ed0..cab73867172d8aa0a51b384dc8b86855992a8f44 100644 (file)
--- a/micropeak.sch
+++ b/micropeak.sch
@@ -233,5 +233,16 @@ footprint=hole-M2.5
 T 53700 42900 5 10 0 1 0 0 1
 loadstatus=noload
 }
-C 54200 42800 1 0 0 gnd-1.sym
-N 54300 43900 54300 43100 4
+C 54200 41900 1 0 0 gnd-1.sym
+N 54300 42200 54300 43900 4
+C 53700 42100 1 0 0 hole_plated.sym
+{
+T 53800 43800 5 10 0 0 0 0 1
+device=HOLE_PLATED
+T 53800 42600 5 10 1 1 0 0 1
+refdes=H3
+T 53700 42100 5 10 0 0 0 0 1
+footprint=hole-M2.5
+T 53700 42100 5 10 0 1 0 0 1
+loadstatus=noload
+}