Signed-off-by: Keith Packard <keithp@keithp.com>
image::graph.png[width="5.5in"]
By default, the graph contains acceleration (blue),
image::graph.png[width="5.5in"]
By default, the graph contains acceleration (blue),
+ .Flight Graph Configuration
image::graph-configure.png[width="5.5in"]
This selects which graph elements to show, and, at the
image::graph-configure.png[width="5.5in"]
This selects which graph elements to show, and, at the
image::graph-stats.png[width="5.5in"]
Shows overall data computed from the flight.
==== Map
image::graph-stats.png[width="5.5in"]
Shows overall data computed from the flight.
==== Map
image::graph-map.png[width="5.5in"]
Shows a satellite image of the flight area overlaid
image::graph-map.png[width="5.5in"]
Shows a satellite image of the flight area overlaid
+ .Altimeter Configuration
image::configure-altimeter.png[width="3.6in"]
Select this button and then select either an altimeter or
image::configure-altimeter.png[width="3.6in"]
Select this button and then select either an altimeter or
==== Configure Pyro Channels
==== Configure Pyro Channels
+ .Additional Pyro Channel Configuration
image::configure-pyro.png[width="5.5in"]
This opens a separate window to configure the
image::configure-pyro.png[width="5.5in"]
This opens a separate window to configure the
image::fire-igniter.png[width="1.2in"]
This activates the igniter circuits in the flight
image::fire-igniter.png[width="1.2in"]
This activates the igniter circuits in the flight
image::scan-channels.png[width="3.2in"]
This listens for telemetry packets on all of the
image::scan-channels.png[width="3.2in"]
This listens for telemetry packets on all of the
image::load-maps.png[width="5.2in"]
Before heading out to a new launch site, you can use
image::load-maps.png[width="5.2in"]
Before heading out to a new launch site, you can use
image::monitor-idle.png[width="5.2in"]
This brings up a dialog similar to the Monitor Flight
image::monitor-idle.png[width="5.2in"]
This brings up a dialog similar to the Monitor Flight
image::easymega-v1.0-top.jpg[width="4.5in"]
EasyMega is a 1¼ inch by 2¼ inch circuit board. It was
image::easymega-v1.0-top.jpg[width="4.5in"]
EasyMega is a 1¼ inch by 2¼ inch circuit board. It was
image::easymini-top.jpg[width="5.5in"]
EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
image::easymini-top.jpg[width="5.5in"]
EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
image::telemega-v1.0-top.jpg[width="5.5in"]
TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
image::telemega-v1.0-top.jpg[width="5.5in"]
TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
+ .TeleMetrum v2 Board
+ image::telemetrum-v2.0-th.jpg[width="5.5in"]
+
+ .TeleMetrum v1 Board
image::telemetrum-v1.1-thside.jpg[width="5.5in"]
TeleMetrum is a 1 inch by 2¾ inch circuit board. It was designed to
image::telemetrum-v1.1-thside.jpg[width="5.5in"]
TeleMetrum is a 1 inch by 2¾ inch circuit board. It was designed to
image::telemini-v1-top.jpg[width="5.5in"]
TeleMini v1.0 is ½ inches by 1½ inches. It was
image::telemini-v1-top.jpg[width="5.5in"]
TeleMini v1.0 is ½ inches by 1½ inches. It was
image::telemini-v2-top.jpg[width="5.5in"]
image::telemini-v2-top.jpg[width="5.5in"]
TeleMini v2.0 is 0.8 inches by 1½ inches. It adds more
on-board data logging memory, a built-in USB connector and
TeleMini v2.0 is 0.8 inches by 1½ inches. It adds more
on-board data logging memory, a built-in USB connector and