== Configuration
- There are 3 things you need to configure identically in each unit
+ There are three things you need to configure identically in each unit
that is part of a TeleLaunch system for wireless communications to
succeed. Those are the operating frequency, the callsign, and a key
for the AES encryption algorithm. Additionally, each TeleFire unit
Each TeleFire unit needs to be configured with a bank number,
and bank numbers should be unique within a given system. For
- most systems with 8 or less banks, just use the DIP switch
+ most systems with 8 or fewer banks, just use the DIP switch
on the circuit board inside the TeleFire unit to select the
desired bank. Only one switch should be turned on. Switch
one means bank one, etc.
The TeleLCO unit should be placed on a table at the Launch
Control position. It can be helpful for the LCO (the human(s)
too, not just the electronics!) to be provided with some
- shade, but the use of transreflexive LCDs for the digit
+ shade, but the use of reflective LCDs for the digit
displays and ultri-bright LEDs make TeleLCO operation
reasonable even in direct sunlight.