This configures the MegaDongle v0.1 directory to use the pin
assignments in TeleMetrum v1.9 boards.
Signed-off-by: Keith Packard <keithp@keithp.com>
-ao_rssi_set(int rssi_value);
+ao_rssi_set(int16_t rssi_value);
void
ao_rssi_init(AO_LED_TYPE rssi_led);
void
ao_rssi_init(AO_LED_TYPE rssi_led);
{
#if LEGACY_MONITOR
__xdata char callsign[AO_MAX_CALLSIGN+1];
{
#if LEGACY_MONITOR
__xdata char callsign[AO_MAX_CALLSIGN+1];
+#endif
+#if LEGACY_MONITOR || HAS_RSSI
int16_t rssi;
#endif
uint8_t ao_monitor_tail;
int16_t rssi;
#endif
uint8_t ao_monitor_tail;
hex(sum);
putchar ('\n');
#if HAS_RSSI
hex(sum);
putchar ('\n');
#if HAS_RSSI
- if (recv_raw.packet[ao_monitoring + 1] & PKT_APPEND_STATUS_1_CRC_OK) {
+ if (recv_raw.packet[ao_monitoring + 1] & AO_RADIO_STATUS_CRC_OK) {
rssi = AO_RSSI_FROM_RADIO(recv_raw.packet[ao_monitoring]);
ao_rssi_set(rssi);
}
rssi = AO_RSSI_FROM_RADIO(recv_raw.packet[ao_monitoring]);
ao_rssi_set(rssi);
}
-ao_rssi_set(int rssi_value)
+ao_rssi_set(int16_t rssi_value)
{
if (rssi_value > 0)
rssi_value = 0;
{
if (rssi_value > 0)
rssi_value = 0;
ao_rssi.c \
ao_send_packet.c \
ao_packet_master.c \
ao_rssi.c \
ao_send_packet.c \
ao_packet_master.c \
ao_packet.c
PRODUCT=MegaDongle-v0.1
ao_packet.c
PRODUCT=MegaDongle-v0.1
main(void)
{
ao_clock_init();
main(void)
{
ao_clock_init();
#if HAS_STACK_GUARD
ao_mpu_init();
#endif
#if HAS_STACK_GUARD
ao_mpu_init();
#endif
ao_send_packet_init();
ao_config_init();
ao_send_packet_init();
ao_config_init();
ao_start_scheduler();
return 0;
}
ao_start_scheduler();
return 0;
}
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*/
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*/
+/* Using TeleMetrum v1.9 board */
+
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
#define HAS_SERIAL_1 0
#define USE_SERIAL_1_STDIN 0
#define SERIAL_1_PB6_PB7 0
#define HAS_SERIAL_1 0
#define USE_SERIAL_1_STDIN 0
#define SERIAL_1_PB6_PB7 0
-#define SERIAL_1_PA9_PA10 1
+#define SERIAL_1_PA9_PA10 0
#define HAS_SERIAL_2 0
#define USE_SERIAL_2_STDIN 0
#define HAS_SERIAL_2 0
#define USE_SERIAL_2_STDIN 0
#define HAS_SERIAL_3 0
#define USE_SERIAL_3_STDIN 0
#define SERIAL_3_PB10_PB11 0
#define HAS_SERIAL_3 0
#define USE_SERIAL_3_STDIN 0
#define SERIAL_3_PB10_PB11 0
-#define SERIAL_3_PC10_PC11 1
+#define SERIAL_3_PC10_PC11 0
#define SERIAL_3_PD8_PD9 0
#define SERIAL_3_PD8_PD9 0
-#define ao_gps_getchar ao_serial3_getchar
-#define ao_gps_putchar ao_serial3_putchar
-#define ao_gps_set_speed ao_serial3_set_speed
-
-#define HAS_EEPROM 0
-#define USE_INTERNAL_FLASH 0
+#define HAS_EEPROM 1
+#define USE_INTERNAL_FLASH 1
+#define USE_STORAGE_CONFIG 0
+#define USE_EEPROM_CONFIG 1
#define HAS_USB 1
#define HAS_BEEP 0
#define HAS_RADIO 1
#define HAS_TELEMETRY 0
#define HAS_USB 1
#define HAS_BEEP 0
#define HAS_RADIO 1
#define HAS_TELEMETRY 0
#define HAS_SPI_1 0
#define SPI_1_PA5_PA6_PA7 0 /* Barometer */
#define HAS_SPI_1 0
#define SPI_1_PA5_PA6_PA7 0 /* Barometer */
#define SPI_1_PE13_PE14_PE15 0 /* Accelerometer */
#define HAS_SPI_2 1
#define SPI_1_PE13_PE14_PE15 0 /* Accelerometer */
#define HAS_SPI_2 1
-#define SPI_2_PB13_PB14_PB15 1 /* Flash, Companion */
+#define SPI_2_PB13_PB14_PB15 1 /* Radio */
#define SPI_2_PD1_PD3_PD4 0
#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
#define SPI_2_PD1_PD3_PD4 0
#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
#define SPI_2_MISO_PIN 14
#define SPI_2_MOSI_PIN 15
#define SPI_2_MISO_PIN 14
#define SPI_2_MOSI_PIN 15
-#define HAS_I2C_1 0
-#define I2C_1_PB8_PB9 1
-
-#define HAS_I2C_2 0
-#define I2C_2_PB10_PB11 1
-
#define PACKET_HAS_SLAVE 0
#define PACKET_HAS_MASTER 1
#define LOW_LEVEL_DEBUG 0
#define PACKET_HAS_SLAVE 0
#define PACKET_HAS_MASTER 1
#define LOW_LEVEL_DEBUG 0
-#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOAEN
-#define LED_PORT_1_ENABLE STM_RCC_AHBENR_GPIOBEN
-#define LED_PORT_0 (&stm_gpioa)
-#define LED_PORT_0_MASK (0xff)
+#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOCEN
+#define LED_PORT_0 (&stm_gpioc)
+#define LED_PORT_0_MASK (0xffff)
#define LED_PORT_0_SHIFT 0
#define LED_PORT_0_SHIFT 0
-#define LED_PORT_1_MASK (0xff00)
-#define LED_PORT_1_SHIFT 0
-#define LED_PORT_1 (&stm_gpiob)
-#define LED_PIN_RED 1
-#define LED_PIN_GREEN 12
+#define LED_PIN_RED 14
+#define LED_PIN_GREEN 15
#define AO_LED_RED (1 << LED_PIN_RED)
#define AO_LED_GREEN (1 << LED_PIN_GREEN)
#define AO_LED_RED (1 << LED_PIN_RED)
#define AO_LED_GREEN (1 << LED_PIN_GREEN)
#define AO_FEC_DEBUG 0
#define AO_CC1120_SPI_CS_PORT (&stm_gpioa)
#define AO_FEC_DEBUG 0
#define AO_CC1120_SPI_CS_PORT (&stm_gpioa)
-#define AO_CC1120_SPI_CS_PIN 0
+#define AO_CC1120_SPI_CS_PIN 2
#define AO_CC1120_SPI_BUS AO_SPI_2_PB13_PB14_PB15
#define AO_CC1120_SPI stm_spi2
#define AO_CC1120_SPI_BUS AO_SPI_2_PB13_PB14_PB15
#define AO_CC1120_SPI stm_spi2
-#define AO_CC1120_INT_PORT (&stm_gpioc)
-#define AO_CC1120_INT_PIN 13
+#define AO_CC1120_INT_PORT (&stm_gpioa)
+#define AO_CC1120_INT_PIN 3
-#define AO_CC1120_MCU_WAKEUP_PORT (&stm_gpioc)
-#define AO_CC1120_MCU_WAKEUP_PIN (0)
+#define AO_CC1120_MCU_WAKEUP_PORT (&stm_gpioa)
+#define AO_CC1120_MCU_WAKEUP_PIN (4)
#define AO_CC1120_INT_GPIO 2
#define AO_CC1120_INT_GPIO_IOCFG CC1120_IOCFG2
#define AO_CC1120_INT_GPIO 2
#define AO_CC1120_INT_GPIO_IOCFG CC1120_IOCFG2