doc: Provide more actual links instead of just chapter names

Replace 'see chapter "foo"' with 'see <<foo>>' so that a link is
created to directly go to the relevant text.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/doc/altosui.inc b/doc/altosui.inc
index df5a3ceea99cdee8090a1e97134a2aff29165d9d..3c26b441d098637dfcc1bee355474c1c23fb7fb7 100644 (file)
--- a/doc/altosui.inc
+++ b/doc/altosui.inc
@@ -315,9 +315,9 @@
                data will be downloaded from that device directly. If
                you select a TeleDongle device, flight data will be
                downloaded from a flight computer over radio link via
                data will be downloaded from that device directly. If
                you select a TeleDongle device, flight data will be
                downloaded from a flight computer over radio link via

-               the specified TeleDongle. See the chapter on
-               Controlling An Altimeter Over The Radio Link for more
-               information.
+               the specified TeleDongle. See
+               <<_controlling_an_altimeter_over_the_radio_link>> for
+               more information.

 
                After the device has been selected, a dialog showing
                the flight data saved in the device will be shown
 
                After the device has been selected, a dialog showing
                the flight data saved in the device will be shown


@@ -343,7 +343,7 @@
 
                Once a flight record is selected, the flight monitor interface
                is displayed and the flight is re-enacted in real time. Check
 
                Once a flight record is selected, the flight monitor interface
                is displayed and the flight is re-enacted in real time. Check

-               the Monitor Flight chapter above to learn how this window operates.
+               <<_monitor_flight>> to learn how this window operates.

 
        === Graph Data
 
 
        === Graph Data
 


@@ -567,8 +567,8 @@
                programming). TeleMega, EasyMega, TeleMetrum v2,
                EasyMini and TeleDongle v3 are all programmed directly
                over their USB ports (self programming).  Please read
                programming). TeleMega, EasyMega, TeleMetrum v2,
                EasyMini and TeleDongle v3 are all programmed directly
                over their USB ports (self programming).  Please read

-               the directions for flashing devices in the Updating
-               Device Firmware chapter below.
+               the directions for flashing devices in
+               <<_updating_device_firmware>>.

 
        === Fire Igniter
 
 
        === Fire Igniter
 

diff --git a/doc/aprs-operation.inc b/doc/aprs-operation.inc
index e514e1103a1f1e3400a3b5f5f705a197d4f28dbb..9b1d91ebdc06b30be8c880fa321368154d3f8ff5 100644 (file)
--- a/doc/aprs-operation.inc
+++ b/doc/aprs-operation.inc
@@ -6,7 +6,7 @@
                interval of at least 5 seconds to avoid consuming too much
                battery power or radio channel bandwidth. You can configure
                the APRS interval using {application}; that process is described in
                interval of at least 5 seconds to avoid consuming too much
                battery power or radio channel bandwidth. You can configure
                the APRS interval using {application}; that process is described in

-               <<{configure_section}>> in the {application} chapter.
+               <<{configure_section}>>.

 
                AltOS supports both compressed and uncompressed APRS
                position report data formats. The compressed format
 
                AltOS supports both compressed and uncompressed APRS
                position report data formats. The compressed format

diff --git a/doc/telegps-application.inc b/doc/telegps-application.inc
index 41dda96877e1bae92cb29c3a891c938e27eaeb11..3e6b385ed64509ce6d636b49ae4ddc885813204b 100644 (file)
--- a/doc/telegps-application.inc
+++ b/doc/telegps-application.inc
@@ -342,12 +342,10 @@
 
                The rest of the dialog contains the parameters to be configured.
 
 
                The rest of the dialog contains the parameters to be configured.
 

-          The rest of the dialog contains the parameters to be configured.
-       

                include::config-device.raw[]
 
        === Flash Device
 
                This reprograms TeleGPS devices with new
                firmware. Please read the directions for flashing
                include::config-device.raw[]
 
        === Flash Device
 
                This reprograms TeleGPS devices with new
                firmware. Please read the directions for flashing

-               devices in the Updating Device Firmware chapter below.
+               devices in <<_updating_device_firmware>>.

diff --git a/doc/telegps-system-operation.inc b/doc/telegps-system-operation.inc
index 40ab467ca736122835da9e2bb9a10c064a5cc1cc..c9fce7f0d4f1857d6a94704b784cb290ef111473 100644 (file)
--- a/doc/telegps-system-operation.inc
+++ b/doc/telegps-system-operation.inc
@@ -25,7 +25,6 @@
 
        === Configurable Parameters
 
 
        === Configurable Parameters
 

-        Configuring TeleGPS is very
-        simple; the few configurable parameters can all be set
-        using the TeleGPS application over USB. Read
-       the Configure TeleGPS section in the TeleGPS Software chapter
+        Configuring TeleGPS is very simple; the few configurable
+        parameters can all be set using the TeleGPS application over
+        USB. Check out <<_configure_device>>.