+++ /dev/null
-/*
- * Copyright © 2010 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-#ifndef _AO_PINS_H_
-#define _AO_PINS_H_
-
-#define HAS_RADIO 1
-#define HAS_RADIO_RATE 1
-#define HAS_TELEMETRY 0
-
-#define HAS_FLIGHT 0
-#define HAS_USB 1
-#define HAS_BEEP 1
-#define BEEPER_CHANNEL 4
-#define HAS_GPS 0
-#define HAS_SERIAL_1 0
-#define HAS_ADC 1
-#define HAS_DBG 0
-#define HAS_EEPROM 1
-#define HAS_LOG 1
-#define HAS_PAD 1
-#define USE_INTERNAL_FLASH 0
-#define IGNITE_ON_P0 0
-#define PACKET_HAS_MASTER 0
-#define PACKET_HAS_SLAVE 0
-#define AO_DATA_RING 32
-#define HAS_FIXED_PAD_BOX 1
-
-#define LOG_ERASE_MARK 0x55
-
-/* 8MHz High speed external crystal */
-#define AO_HSE 8000000
-
-/* PLLVCO = 96MHz (so that USB will work) */
-#define AO_PLLMUL 12
-#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
-
-#define AO_CC1200_FOSC 40000000
-
-/* SYSCLK = 32MHz (no need to go faster than CPU) */
-#define AO_PLLDIV 3
-#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
-
-/* HCLK = 32MHz (CPU clock) */
-#define AO_AHB_PRESCALER 1
-#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
-
-/* Run APB1 at 16MHz (HCLK/2) */
-#define AO_APB1_PRESCALER 2
-#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
-
-/* Run APB2 at 16MHz (HCLK/2) */
-#define AO_APB2_PRESCALER 2
-#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
-
-#define HAS_EEPROM 1
-#define USE_EEPROM_CONFIG 1
-#define USE_STORAGE_CONFIG 0
-#define HAS_USB 1
-#define HAS_RADIO 1
-#define HAS_RADIO_RATE 1
-#define HAS_TELEMETRY 0
-#define HAS_AES 1
-
-#define HAS_SPI_1 0
-#define SPI_1_PA5_PA6_PA7 0
-#define SPI_1_PB3_PB4_PB5 0
-#define SPI_1_PE13_PE14_PE15 0
-
-#define HAS_SPI_2 1 /* CC1200 */
-#define SPI_2_PB13_PB14_PB15 1
-#define SPI_2_PD1_PD3_PD4 0
-#define SPI_2_GPIO (&stm_gpiob)
-#define SPI_2_SCK 13
-#define SPI_2_MISO 14
-#define SPI_2_MOSI 15
-#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
-
-#define HAS_I2C_1 0
-
-#define HAS_I2C_2 0
-
-#define PACKET_HAS_SLAVE 0
-#define PACKET_HAS_MASTER 0
-
-#define FAST_TIMER_FREQ 10000 /* .1ms for debouncing */
-
-/*
- * SPI Flash memory
- */
-
-#define M25_MAX_CHIPS 1
-#define AO_M25_SPI_CS_PORT (&stm_gpioa)
-#define AO_M25_SPI_CS_MASK (1 << 15)
-#define AO_M25_SPI_BUS AO_SPI_2_PB13_PB14_PB15
-
-/*
- * Radio is a cc1200 connected via SPI
- */
-
-#define AO_RADIO_CAL_DEFAULT 5695733
-
-#define AO_FEC_DEBUG 0
-#define AO_CC1200_SPI_CS_PORT (&stm_gpioa)
-#define AO_CC1200_SPI_CS_PIN 7
-#define AO_CC1200_SPI_BUS AO_SPI_2_PB13_PB14_PB15
-#define AO_CC1200_SPI stm_spi2
-#define AO_CC1200_SPI_SPEED AO_SPI_SPEED_FAST
-
-#define AO_CC1200_INT_PORT (&stm_gpiob)
-#define AO_CC1200_INT_PIN (11)
-
-#define AO_CC1200_INT_GPIO 2
-#define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2
-
-#define LED_PORT_0 (&stm_gpioa)
-#define LED_PORT_1 (&stm_gpiob)
-
-#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOAEN
-#define LED_PORT_1_ENABLE STM_RCC_AHBENR_GPIOBEN
-
-/* Port A, pins 4-6 */
-#define LED_PORT_0_SHIFT 4
-#define LED_PORT_0_MASK 0x7
-#define LED_PIN_GREEN 0
-#define LED_PIN_AMBER 1
-#define LED_PIN_RED 2
-#define AO_LED_RED (1 << LED_PIN_RED)
-#define AO_LED_AMBER (1 << LED_PIN_AMBER)
-#define AO_LED_GREEN (1 << LED_PIN_GREEN)
-
-/* Port B, pins 4-5 */
-#define LED_PORT_1_SHIFT 0
-#define LED_PORT_1_MASK (0x3 << 4)
-#define LED_PIN_CONT_0 4
-#define LED_PIN_ARMED 5
-
-#define AO_LED_ARMED (1 << LED_PIN_ARMED)
-#define AO_LED_CONTINUITY(c) (1 << (4 - (c)))
-#define AO_LED_CONTINUITY_MASK (0x1 << 4)
-
-#define LEDS_AVAILABLE (LED_PORT_0_MASK|LED_PORT_1_MASK)
-
-/* Alarm A */
-#define AO_SIREN
-#define AO_SIREN_PORT (&stm_gpiob)
-#define AO_SIREN_PIN 8
-
-/* Alarm B */
-#define AO_STROBE
-#define AO_STROBE_PORT (&stm_gpiob)
-#define AO_STROBE_PIN 9
-
-#define SPI_CONST 0x00
-
-#define AO_PAD_NUM 1
-#define AO_PAD_PORT (&stm_gpioa)
-
-#define AO_PAD_PIN_0 1
-#define AO_PAD_ADC_0 0
-
-#define AO_PAD_ALL_PINS ((1 << AO_PAD_PIN_0))
-#define AO_PAD_ALL_CHANNELS ((1 << 0))
-
-/* test these values with real igniters */
-#define AO_PAD_RELAY_CLOSED 3524
-#define AO_PAD_NO_IGNITER 16904
-#define AO_PAD_GOOD_IGNITER 22514
-
-#define AO_PAD_ADC_PYRO 2
-#define AO_PAD_ADC_BATT 8
-
-#define AO_PAD_ADC_THRUST 3
-#define AO_PAD_ADC_PRESSURE 18
-
-#define AO_ADC_FIRST_PIN 0
-
-#define AO_NUM_ADC 5
-
-#define AO_ADC_SQ1 AO_PAD_ADC_0
-#define AO_ADC_SQ2 AO_PAD_ADC_PYRO
-#define AO_ADC_SQ3 AO_PAD_ADC_BATT
-#define AO_ADC_SQ4 AO_PAD_ADC_THRUST
-#define AO_ADC_SQ5 AO_PAD_ADC_PRESSURE
-
-#define AO_PYRO_R_PYRO_SENSE 200
-#define AO_PYRO_R_SENSE_GND 22
-
-#define AO_FIRE_R_POWER_FET 0
-#define AO_FIRE_R_FET_SENSE 200
-#define AO_FIRE_R_SENSE_GND 22
-
-#define HAS_ADC_TEMP 0
-
-struct ao_adc {
- int16_t sense[AO_PAD_NUM];
- int16_t pyro;
- int16_t batt;
- int16_t thrust;
- int16_t pressure;
-};
-
-#define AO_ADC_DUMP(p) \
- printf ("tick: %5u 0: %5d pyro: %5d batt %5d thrust %5d pressure %5d\n", \
- (p)->tick, \
- (p)->adc.sense[0], \
- (p)->adc.pyro, \
- (p)->adc.batt, \
- (p)->adc.thrust, \
- (p)->adc.pressure)
-
-#define AO_ADC_PINS ((1 << AO_PAD_ADC_0) | \
- (1 << AO_PAD_ADC_PYRO) | \
- (1 << AO_PAD_ADC_BATT) | \
- (1 << AO_PAD_ADC_THRUST) | \
- (1 << AO_PAD_ADC_PRESSURE))
-
-#endif /* _AO_PINS_H_ */