#include "ao.h"
#include "ao_usb.h"
#include "ao_product.h"
+#include "ao_power.h"
#define USB_DEBUG 0
+#define USB_STATUS 0
#define USB_DEBUG_DATA 0
#define USB_ECHO 0
+#ifndef AO_PA11_PA12_RMP
+#error "must define AO_PA11_PA12_RMP"
+#endif
+
+#ifndef AO_POWER_MANAGEMENT
+#define AO_POWER_MANAGEMENT 0
+#endif
+
#ifndef USE_USB_STDIO
#define USE_USB_STDIO 1
#endif
static uint16_t *ao_usb_ep0_tx_buffer;
static uint16_t *ao_usb_ep0_rx_buffer;
+/* Pointer to interrupt buffer in USB memory */
+static uint16_t ao_usb_int_tx_offset;
+
/* Pointer to bulk data tx/rx buffers in USB memory */
+static uint16_t ao_usb_in_tx_offset;
static uint16_t *ao_usb_in_tx_buffer;
+static uint16_t ao_usb_out_rx_offset;
static uint16_t *ao_usb_out_rx_buffer;
/* System ram shadow of USB buffer; writing individual bytes is
uint8_t ao_usb_running;
static uint8_t ao_usb_configuration;
-#define AO_USB_EP0_GOT_RESET 1
-#define AO_USB_EP0_GOT_SETUP 2
-#define AO_USB_EP0_GOT_RX_DATA 4
-#define AO_USB_EP0_GOT_TX_ACK 8
+#define AO_USB_EP0_GOT_SETUP 1
+#define AO_USB_EP0_GOT_RX_DATA 2
+#define AO_USB_EP0_GOT_TX_ACK 4
static uint8_t ao_usb_ep0_receive;
static uint8_t ao_usb_address;
return (uint16_t *) (stm_usb_sram + sram_addr);
}
+static inline uint16_t ao_usb_packet_buffer_offset(uint16_t *addr)
+{
+ return (uint16_t) ((uint8_t *) addr - stm_usb_sram);
+}
+
static inline uint32_t ao_usb_epr_stat_rx(uint32_t epr) {
return (epr >> STM_USB_EPR_STAT_RX) & STM_USB_EPR_STAT_RX_MASK;
}
}
static void
-ao_usb_init_btable(void)
+ao_usb_alloc_buffers(void)
{
ao_usb_sram_addr = 0;
ao_usb_bdt = (void *) stm_usb_sram;
-
ao_usb_sram_addr += 8 * STM_USB_BDT_SIZE;
- /* Set up EP 0 - a Control end point with 32 bytes of in and out buffers */
-
- ao_usb_bdt[0].single.addr_tx = ao_usb_sram_addr;
- ao_usb_bdt[0].single.count_tx = 0;
ao_usb_ep0_tx_buffer = ao_usb_packet_buffer_addr(ao_usb_sram_addr);
ao_usb_sram_addr += AO_USB_CONTROL_SIZE;
- ao_usb_bdt[0].single.addr_rx = ao_usb_sram_addr;
- ao_usb_bdt[0].single.count_rx = ((1 << STM_USB_BDT_COUNT_RX_BL_SIZE) |
- (((AO_USB_CONTROL_SIZE / 32) - 1) << STM_USB_BDT_COUNT_RX_NUM_BLOCK));
ao_usb_ep0_rx_buffer = ao_usb_packet_buffer_addr(ao_usb_sram_addr);
ao_usb_sram_addr += AO_USB_CONTROL_SIZE;
+ ao_usb_int_tx_offset = ao_usb_sram_addr;
+ ao_usb_sram_addr += AO_USB_INT_SIZE;
+
+ ao_usb_out_rx_buffer = ao_usb_packet_buffer_addr(ao_usb_sram_addr);
+ ao_usb_out_rx_offset = ao_usb_sram_addr;
+ ao_usb_sram_addr += AO_USB_OUT_SIZE;
+
+ ao_usb_in_tx_buffer = ao_usb_packet_buffer_addr(ao_usb_sram_addr);
+ ao_usb_in_tx_offset = ao_usb_sram_addr;
+ ao_usb_sram_addr += AO_USB_IN_SIZE;
+}
+
+static void
+ao_usb_init_btable(void)
+{
+ /* Set up EP 0 - a Control end point with 32 bytes of in and out buffers */
+
+ ao_usb_bdt[0].single.addr_tx = ao_usb_packet_buffer_offset(ao_usb_ep0_tx_buffer);
+ ao_usb_bdt[0].single.count_tx = 0;
+
+ ao_usb_bdt[0].single.addr_rx = ao_usb_packet_buffer_offset(ao_usb_ep0_rx_buffer);
+ ao_usb_bdt[0].single.count_rx = ((1 << STM_USB_BDT_COUNT_RX_BL_SIZE) |
+ (((AO_USB_CONTROL_SIZE / 32) - 1) << STM_USB_BDT_COUNT_RX_NUM_BLOCK));
}
static void
}
ao_usb_set_address(0);
+
+ ao_usb_running = 0;
}
static void
{
debug ("ao_usb_set_configuration\n");
+#if AO_USB_HAS_INT
/* Set up the INT end point */
- ao_usb_bdt[AO_USB_INT_EPR].single.addr_tx = ao_usb_sram_addr;
+ ao_usb_bdt[AO_USB_INT_EPR].single.addr_tx = ao_usb_int_tx_offset;
ao_usb_bdt[AO_USB_INT_EPR].single.count_tx = 0;
- ao_usb_in_tx_buffer = ao_usb_packet_buffer_addr(ao_usb_sram_addr);
- ao_usb_sram_addr += AO_USB_INT_SIZE;
ao_usb_init_ep(AO_USB_INT_EPR,
AO_USB_INT_EP,
STM_USB_EPR_EP_TYPE_INTERRUPT,
STM_USB_EPR_STAT_RX_DISABLED,
STM_USB_EPR_STAT_TX_NAK);
+#endif
+#if AO_USB_HAS_OUT
/* Set up the OUT end point */
- ao_usb_bdt[AO_USB_OUT_EPR].single.addr_rx = ao_usb_sram_addr;
+ ao_usb_bdt[AO_USB_OUT_EPR].single.addr_rx = ao_usb_out_rx_offset;
ao_usb_bdt[AO_USB_OUT_EPR].single.count_rx = ((1 << STM_USB_BDT_COUNT_RX_BL_SIZE) |
(((AO_USB_OUT_SIZE / 32) - 1) << STM_USB_BDT_COUNT_RX_NUM_BLOCK));
- ao_usb_out_rx_buffer = ao_usb_packet_buffer_addr(ao_usb_sram_addr);
- ao_usb_sram_addr += AO_USB_OUT_SIZE;
ao_usb_init_ep(AO_USB_OUT_EPR,
AO_USB_OUT_EP,
STM_USB_EPR_EP_TYPE_BULK,
STM_USB_EPR_STAT_RX_VALID,
STM_USB_EPR_STAT_TX_DISABLED);
+#endif
+#if AO_USB_HAS_IN
/* Set up the IN end point */
- ao_usb_bdt[AO_USB_IN_EPR].single.addr_tx = ao_usb_sram_addr;
+ ao_usb_bdt[AO_USB_IN_EPR].single.addr_tx = ao_usb_in_tx_offset;
ao_usb_bdt[AO_USB_IN_EPR].single.count_tx = 0;
- ao_usb_in_tx_buffer = ao_usb_packet_buffer_addr(ao_usb_sram_addr);
- ao_usb_sram_addr += AO_USB_IN_SIZE;
ao_usb_init_ep(AO_USB_IN_EPR,
AO_USB_IN_EP,
STM_USB_EPR_EP_TYPE_BULK,
STM_USB_EPR_STAT_RX_DISABLED,
STM_USB_EPR_STAT_TX_NAK);
+#endif
ao_usb_running = 1;
+#if AO_USB_DIRECTIO
+ ao_wakeup(&ao_usb_running);
+#endif
}
static uint16_t control_count;
*/
static void
-ao_usb_write(const uint8_t *src, uint16_t *base, uint16_t bytes)
+ao_usb_copy_tx(const uint8_t *src, uint16_t *base, uint16_t bytes)
{
while (bytes >= 2) {
*base++ = src[0] | (src[1] << 8);
}
static void
-ao_usb_read(uint8_t *dst, uint16_t *base, uint16_t bytes)
+ao_usb_copy_rx(uint8_t *dst, uint16_t *base, uint16_t bytes)
{
while (bytes >= 2) {
uint16_t s = *base++;
ao_usb_ep0_in_len -= this_len;
debug_data ("Flush EP0 len %d:", this_len);
- ao_usb_write(ao_usb_ep0_in_data, ao_usb_ep0_tx_buffer, this_len);
+ ao_usb_copy_tx(ao_usb_ep0_in_data, ao_usb_ep0_tx_buffer, this_len);
debug_data ("\n");
ao_usb_ep0_in_data += this_len;
/* Pull all of the data out of the packet */
debug_data ("Fill EP0 len %d:", len);
- ao_usb_read(ao_usb_ep0_out_data, ao_usb_ep0_rx_buffer, len);
+ ao_usb_copy_rx(ao_usb_ep0_out_data, ao_usb_ep0_rx_buffer, len);
debug_data ("\n");
ao_usb_ep0_out_data += len;
ao_usb_ep0_handle(uint8_t receive)
{
ao_usb_ep0_receive = 0;
- if (receive & AO_USB_EP0_GOT_RESET) {
- debug ("\treset\n");
- ao_usb_set_ep0();
- return;
- }
if (receive & AO_USB_EP0_GOT_SETUP) {
debug ("\tsetup\n");
ao_usb_ep0_setup();
}
}
+#if AO_POWER_MANAGEMENT
+void
+ao_usb_suspend(void)
+{
+ stm_usb.cntr |= (1 << STM_USB_CNTR_FSUSP);
+ ao_power_suspend();
+ stm_usb.cntr |= (1 << STM_USB_CNTR_LP_MODE);
+ ao_clock_suspend();
+}
+
+void
+ao_usb_wakeup(void)
+{
+ ao_clock_resume();
+ stm_usb.cntr &= ~(1 << STM_USB_CNTR_FSUSP);
+ ao_power_resume();
+}
+#endif
+
void
stm_usb_isr(void)
{
if (istr & (1 << STM_USB_ISTR_RESET)) {
++reset_count;
- ao_usb_ep0_receive |= AO_USB_EP0_GOT_RESET;
- ao_usb_ep0_handle(ao_usb_ep0_receive);
+ debug ("\treset\n");
+ ao_usb_set_ep0();
}
-
+#if AO_POWER_MANAGEMENT
+ if (istr & (1 << STM_USB_ISTR_SUSP)) {
+ debug ("\tsuspend\n");
+ ao_usb_suspend();
+ }
+ if (istr & (1 << STM_USB_ISTR_WKUP)) {
+ debug ("\twakeup\n");
+ ao_usb_wakeup();
+ }
+#endif
}
/* Queue the current IN buffer for transmission */
ao_usb_in_pending = 1;
if (ao_usb_tx_count != AO_USB_IN_SIZE)
ao_usb_in_flushed = 1;
- ao_usb_write(ao_usb_tx_buffer, ao_usb_in_tx_buffer, ao_usb_tx_count);
+ ao_usb_copy_tx(ao_usb_tx_buffer, ao_usb_in_tx_buffer, ao_usb_tx_count);
+ ao_usb_bdt[AO_USB_IN_EPR].single.addr_tx = ao_usb_in_tx_offset;
ao_usb_bdt[AO_USB_IN_EPR].single.count_tx = ao_usb_tx_count;
ao_usb_tx_count = 0;
_ao_usb_set_stat_tx(AO_USB_IN_EPR, STM_USB_EPR_STAT_TX_VALID);
_rx_dbg1("out_recv count", ao_usb_rx_count);
debug ("recv %d\n", ao_usb_rx_count);
debug_data("Fill OUT len %d:", ao_usb_rx_count);
- ao_usb_read(ao_usb_rx_buffer, ao_usb_out_rx_buffer, ao_usb_rx_count);
+ ao_usb_copy_rx(ao_usb_rx_buffer, ao_usb_out_rx_buffer, ao_usb_rx_count);
debug_data("\n");
ao_usb_rx_pos = 0;
return c;
}
+#if AO_USB_DIRECTIO
+uint16_t *
+ao_usb_alloc(void)
+{
+ uint16_t *buffer;
+
+ buffer = ao_usb_packet_buffer_addr(ao_usb_sram_addr);
+ ao_usb_sram_addr += AO_USB_IN_SIZE;
+ return buffer;
+}
+
+void
+ao_usb_free(uint16_t *addr)
+{
+ uint16_t offset = ao_usb_packet_buffer_offset(addr);
+ if (offset < ao_usb_sram_addr)
+ ao_usb_sram_addr = offset;
+}
+
+void
+ao_usb_write(uint16_t *buffer, uint16_t len)
+{
+ ao_arch_block_interrupts();
+
+ /* Wait for everything to be ready at the same time */
+ for (;;) {
+ /* Make sure USB is connected */
+ if (!ao_usb_running) {
+ ao_sleep(&ao_usb_running);
+ continue;
+ }
+
+ /* Flush any pending regular I/O */
+ if (ao_usb_tx_count) {
+ _ao_usb_in_send();
+ continue;
+ }
+
+ /* Wait for an idle IN buffer */
+ if (ao_usb_in_pending) {
+ ao_sleep(&ao_usb_in_pending);
+ continue;
+ }
+ break;
+ }
+
+ ao_usb_in_pending = 1;
+ ao_usb_in_flushed = (len != AO_USB_IN_SIZE);
+ ao_usb_bdt[AO_USB_IN_EPR].single.addr_tx = ao_usb_packet_buffer_offset(buffer);
+ ao_usb_bdt[AO_USB_IN_EPR].single.count_tx = len;
+ _ao_usb_set_stat_tx(AO_USB_IN_EPR, STM_USB_EPR_STAT_TX_VALID);
+ ao_arch_release_interrupts();
+}
+#endif
+
void
ao_usb_disable(void)
{
stm_usb.cntr = ((1 << STM_USB_CNTR_CTRM) |
(0 << STM_USB_CNTR_PMAOVRM) |
(0 << STM_USB_CNTR_ERRM) |
- (0 << STM_USB_CNTR_WKUPM) |
- (0 << STM_USB_CNTR_SUSPM) |
+ (AO_POWER_MANAGEMENT << STM_USB_CNTR_WKUPM) |
+ (AO_POWER_MANAGEMENT << STM_USB_CNTR_SUSPM) |
(1 << STM_USB_CNTR_RESETM) |
(0 << STM_USB_CNTR_SOFM) |
(0 << STM_USB_CNTR_ESOFM) |
}
#endif
-#if USB_DEBUG
+#if USB_STATUS
static void
ao_usb_irq(void)
{
void
ao_usb_init(void)
{
+ /* Turn on syscfg */
+ stm_rcc.apb2enr |= (1 << STM_RCC_APB2ENR_SYSCFGCOMPEN);
+
+ /* Set PA11/PA12 remapping bit */
+ stm_syscfg.cfgr1 |= (AO_PA11_PA12_RMP << STM_SYSCFG_CFGR1_PA11_PA12_RMP);
+
ao_usb_enable();
debug ("ao_usb_init\n");
ao_usb_ep0_state = AO_USB_EP0_IDLE;
+
+ ao_usb_alloc_buffers();
+
#if USB_ECHO
ao_add_task(&ao_usb_echo_task, ao_usb_echo, "usb echo");
#endif
-#if USB_DEBUG
+#if USB_STATUS
ao_cmd_register(&ao_usb_cmds[0]);
#endif
#if !USB_ECHO
projects / fw / altos / blobdiff