altos: Wire up another CC1120 GPIO to get MARC status changes

[fw/altos] / src / megametrum-v0.1 / ao_pins.h

diff --git a/src/megametrum-v0.1/ao_pins.h b/src/megametrum-v0.1/ao_pins.h
index f6b49dd0578b60675b11d81f3b18b1034fca48f1..ab4cf7dfbec6fe3934023120a876035e2cb7beb8 100644 (file)
--- a/src/megametrum-v0.1/ao_pins.h
+++ b/src/megametrum-v0.1/ao_pins.h
@@ -18,7 +18,7 @@
 #ifndef _AO_PINS_H_
 #define _AO_PINS_H_
 
-#define HAS_MS5611             1
+#define HAS_TASK_QUEUE         1
 
 /* 8MHz High speed external crystal */
 #define AO_HSE                 8000000
@@ -62,13 +62,15 @@
 #define ao_gps_getchar         ao_serial3_getchar
 #define ao_gps_putchar         ao_serial3_putchar
 #define ao_gps_set_speed       ao_serial3_set_speed
+#define ao_gps_fifo            (ao_stm_usart3.rx_fifo)
 
 #define HAS_EEPROM             1
 #define USE_INTERNAL_FLASH     0
 #define HAS_USB                        1
-#define HAS_BEEP               1
+#define HAS_BEEP               0
 #define HAS_RADIO              1
 #define HAS_TELEMETRY          1
+#define HAS_APRS               1
 
 #define HAS_SPI_1              1
 #define SPI_1_PA5_PA6_PA7      1       /* Barometer */
@@ -107,8 +109,6 @@
 #define HAS_GPS                        1
 #define HAS_FLIGHT             1
 #define HAS_ADC                        1
-#define HAS_ACCEL              1
-#define HAS_ACCEL_REF          1
 #define HAS_LOG                        1
 
 /*
@@ -250,6 +250,7 @@ struct ao_adc {
  * Pressure sensor settings
  */
 #define HAS_MS5607             1
+#define HAS_MS5611             0
 #define AO_MS5607_PRIVATE_PINS 1
 #define AO_MS5607_CS_PORT      (&stm_gpioc)
 #define AO_MS5607_CS_PIN       4
@@ -281,11 +282,19 @@ struct ao_adc {
 #define AO_CC1120_SPI_CS_PIN   5
 #define AO_CC1120_SPI_BUS      AO_SPI_2_PB13_PB14_PB15
 
-#define AO_CC1120_INT_PORT     (&stm_gpioc)
-#define AO_CC1120_INT_PIN      14
+#define AO_CC1120_INT_PORT             (&stm_gpioc)
+#define AO_CC1120_INT_PIN              14
+#define AO_CC1120_MCU_WAKEUP_PORT      (&stm_gpioc)
+#define AO_CC1120_MCU_WAKEUP_PIN       (0)
 
 #define AO_CC1120_INT_GPIO     2
-#define HAS_BOOT_RADIO         1
+#define AO_CC1120_INT_GPIO_IOCFG       CC1120_IOCFG2
+
+#define AO_CC1120_MARC_GPIO    3
+#define AO_CC1120_MARC_GPIO_IOCFG      CC1120_IOCFG3
+
+
+#define HAS_BOOT_RADIO         0
 
 /*
  * Mag sensor (hmc5883)