+++ /dev/null
-/*
- * Copyright © 2012 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-/* Using TeleMetrum v1.9 board */
-
-#ifndef _AO_PINS_H_
-#define _AO_PINS_H_
-
-#define HAS_TASK_QUEUE 1
-
-/* 8MHz High speed external crystal */
-#define AO_HSE 8000000
-
-/* PLLVCO = 96MHz (so that USB will work) */
-#define AO_PLLMUL 12
-#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
-
-/* SYSCLK = 32MHz (no need to go faster than CPU) */
-#define AO_PLLDIV 3
-#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
-
-/* HCLK = 32MHz (CPU clock) */
-#define AO_AHB_PRESCALER 1
-#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
-
-/* Run APB1 at 16MHz (HCLK/2) */
-#define AO_APB1_PRESCALER 2
-#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
-
-/* Run APB2 at 16MHz (HCLK/2) */
-#define AO_APB2_PRESCALER 2
-#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
-
-#define HAS_SERIAL_1 0
-#define USE_SERIAL_1_STDIN 0
-#define SERIAL_1_PB6_PB7 0
-#define SERIAL_1_PA9_PA10 0
-
-#define HAS_SERIAL_2 0
-#define USE_SERIAL_2_STDIN 0
-#define SERIAL_2_PA2_PA3 0
-#define SERIAL_2_PD5_PD6 0
-
-#define HAS_SERIAL_3 0
-#define USE_SERIAL_3_STDIN 0
-#define SERIAL_3_PB10_PB11 0
-#define SERIAL_3_PC10_PC11 0
-#define SERIAL_3_PD8_PD9 0
-
-#define HAS_EEPROM 1
-#define USE_INTERNAL_FLASH 1
-#define USE_STORAGE_CONFIG 0
-#define USE_EEPROM_CONFIG 1
-#define HAS_USB 1
-#define HAS_BEEP 0
-#define HAS_RADIO 1
-#define HAS_TELEMETRY 0
-#define HAS_RSSI 1
-
-#define HAS_SPI_1 0
-#define SPI_1_PA5_PA6_PA7 0 /* Barometer */
-#define SPI_1_PB3_PB4_PB5 0
-#define SPI_1_PE13_PE14_PE15 0 /* Accelerometer */
-
-#define HAS_SPI_2 1
-#define SPI_2_PB13_PB14_PB15 1 /* Radio */
-#define SPI_2_PD1_PD3_PD4 0
-#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
-
-#define SPI_2_PORT (&stm_gpiob)
-#define SPI_2_SCK_PIN 13
-#define SPI_2_MISO_PIN 14
-#define SPI_2_MOSI_PIN 15
-
-#define PACKET_HAS_SLAVE 0
-#define PACKET_HAS_MASTER 1
-
-#define LOW_LEVEL_DEBUG 0
-
-#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOCEN
-#define LED_PORT_0 (&stm_gpioc)
-#define LED_PORT_0_MASK (0xffff)
-#define LED_PORT_0_SHIFT 0
-#define LED_PIN_RED 14
-#define LED_PIN_GREEN 15
-#define AO_LED_RED (1 << LED_PIN_RED)
-#define AO_LED_GREEN (1 << LED_PIN_GREEN)
-
-#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN)
-
-#define HAS_GPS 0
-#define HAS_FLIGHT 0
-#define HAS_ADC 0
-#define HAS_LOG 0
-
-/*
- * Telemetry monitoring
- */
-#define HAS_MONITOR 1
-#define LEGACY_MONITOR 0
-#define HAS_MONITOR_PUT 1
-#define AO_MONITOR_LED AO_LED_GREEN
-
-/*
- * Radio (cc1120)
- */
-
-/* gets pretty close to 434.550 */
-
-#define AO_RADIO_CAL_DEFAULT 0x6ca333
-
-#define AO_FEC_DEBUG 0
-#define AO_CC1120_SPI_CS_PORT (&stm_gpioa)
-#define AO_CC1120_SPI_CS_PIN 2
-#define AO_CC1120_SPI_BUS AO_SPI_2_PB13_PB14_PB15
-#define AO_CC1120_SPI stm_spi2
-
-#define AO_CC1120_INT_PORT (&stm_gpioa)
-#define AO_CC1120_INT_PIN 3
-
-#define AO_CC1120_MCU_WAKEUP_PORT (&stm_gpioa)
-#define AO_CC1120_MCU_WAKEUP_PIN (4)
-
-#define AO_CC1120_INT_GPIO 2
-#define AO_CC1120_INT_GPIO_IOCFG CC1120_IOCFG2
-
-#define AO_CC1120_MARC_GPIO 3
-#define AO_CC1120_MARC_GPIO_IOCFG CC1120_IOCFG3
-
-/*
- * Profiling Viterbi decoding
- */
-
-#ifndef AO_PROFILE
-#define AO_PROFILE 0
-#endif
-
-#endif /* _AO_PINS_H_ */
projects / fw / altos / blobdiff