dial it down a bit more to not exceed +10 dBm, or 10 mW

[fw/altos] / src / drivers / ao_cc1200.c

diff --git a/src/drivers/ao_cc1200.c b/src/drivers/ao_cc1200.c
index 7ac32e188e1b46319f14c60b0c4b996517d29825..4ddc96ce09b2dec483e722ea4b03c77ac9858527 100644 (file)
--- a/src/drivers/ao_cc1200.c
+++ b/src/drivers/ao_cc1200.c
@@ -737,11 +737,11 @@ ao_radio_get(uint8_t len)
                last_radio_10mw = ao_config.radio_10mw;
                /*
                 * 0x37 "should" be 10dBm, but measurements on TBT
-                * v4.0 show that too hot by a about 1.5dB, so use
-                * 0x34 to make sure we're in spec.
+                * v4.0 show that too hot, so use * 0x32 to make sure 
+                * we're in spec.
                 */
                if (ao_config.radio_10mw)
-                       ao_radio_reg_write(CC1200_PA_CFG1, 0x34);
+                       ao_radio_reg_write(CC1200_PA_CFG1, 0x32);
                else
                        ao_radio_reg_write(CC1200_PA_CFG1, 0x3f);
        }