doc: Add asciidoc version of altosui chapter.

[fw/altos] / doc / telemini-v2.0.inc

diff --git a/doc/telemini-v2.0.inc b/doc/telemini-v2.0.inc
index 63e6db5d2bcb44e090c21ac97a2457005685a3ec..0a6a7b2d69c2aa0897cfd54c9a639de9fe04fa0a 100644 (file)
--- a/doc/telemini-v2.0.inc
+++ b/doc/telemini-v2.0.inc
@@ -54,6 +54,28 @@
                |Switch connection to positive battery terminal
                |====
 
+       === Connecting A Battery To TeleMini v2.0
+
+               There are two possible battery connections on TeleMini
+               v2.0. You can use either method; both feed through
+               the power switch terminals.
+
+               One battery connection is the standard Altus Metrum
+               white JST plug. This mates with single-cell Lithium
+               Polymer batteries sold by Altus Metrum.
+
+               The other is a pair of screw terminals marked 'Battery
+               +' and 'Battery -'. Connect a battery from 4 to 12
+               volts to these terminals, being careful to match polarity.
+
+       === Charging Lithium Batteries
+
+               Because TeleMini v2.0 allows for batteries other than
+               the standard Altus Metrum Lithium Polymer cells, it
+               cannot incorporate a battery charger
+               circuit. Therefore, when using a Litium Polymer cell,
+               you'll need an external charger. These are available
+               from Altus Metrum, or from Spark Fun.
 
        === Using a Separate Pyro Battery with TeleMini v2.0
        
@@ -78,12 +100,12 @@
 
        === Using an Active Switch with TeleMini v2.0
        
-         As explained above, an external active switch requires three
-         connections, one to the positive battery terminal, one to
-         the flight computer positive input and one to ground. Use
-         the negative external battery connection, top terminal 4 for
-         ground.
-               
-         The positive battery terminal is available on bottom
-         terminal 4, the positive flight computer input is on the
-         bottom terminal 3.
+               As explained above, an external active switch requires three
+               connections, one to the positive battery terminal, one to
+               the flight computer positive input and one to ground. Use
+               the negative external battery connection, top terminal 4 for
+               ground.
+
+               The positive battery terminal is available on bottom
+               terminal 4, the positive flight computer input is on the
+               bottom terminal 3.