-commit d8627bb7b46fc991786835afa38cd720e9e75812
-Merge: 59e23c27 8830fbc9
+commit 8359fcc23a93a37ee3aee4c5d2ef183f18ea3f27
+Merge: b95d6674 9b62f683
Author: Bdale Garbee <bdale@gag.com>
-Date: Sun Aug 5 11:21:37 2018 +0800
+Date: Thu Jul 2 20:20:59 2020 -0600
- Merge branch 'master' into branch-1.8
+ Merge branch 'master' into branch-1.9
+
+commit 9b62f683ff770970a87444dc25522fd771079333
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jul 2 15:26:10 2020 -0700
+
+ Version 1.9.4
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f74016150880265b3edb70637a6be3e6499432de
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jul 2 15:18:56 2020 -0700
+
+ doc: Doc updates for 1.9.4
+
+ Add release notes
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b08a793fb6e6167d635bfbd31605a43db1f5ac5d
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jul 2 15:24:01 2020 -0700
+
+ altos: Make AO_STORAGE_TEST use a separate buffer
+
+ The storage test code needs a buffer which can hold an entire erase
+ block from memory, which means 256 bytes.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 651c66ce117f479158fb0eebd9af6d73f0d9875a
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jul 2 15:11:42 2020 -0700
+
+ altos: Reduce flash temp buffer to make space for Em v1.0 ISR stack
+
+ EasyMini has limited RAM; small enough that increasing the size of the
+ storage buffer from 128 to 256 bytes left too little space at the top
+ of memory for the interrupt stack, causing EasyMini v1.0 to crash at
+ boot.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 35b69569472b00e6937a5d3136d0c400f6b0378f
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 22 17:33:08 2020 -0700
+
+ Add telemetrum v3.0 firmware to release
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f337aecd0370f81c84c84857e1b6325350d96a81
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Jun 16 12:28:39 2020 -0600
+
+ ao-bringup: first cut at turn-on scripts for EasyTimer v1
+
+commit b95d6674d29534363c1d8f46280c028864bdca10
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Jun 15 20:34:50 2020 -0600
+
+ releasing 1.9.3
+
+commit f31d842d0e07a1893441cb89fb287b31b86d28c1
+Merge: 0fd503fb f615725c
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Jun 15 20:26:35 2020 -0600
+
+ Merge branch 'master' into branch-1.9
+
+commit f615725cb6f963cf46715e936e1d60ce7866c3bb
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 15 19:11:49 2020 -0700
+
+ Version 1.9.3
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 765d4c96510c823b4e9410c55ba8466438846029
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 22:50:40 2020 -0700
+
+ doc: Update doc for 1.9.3
+
+ Add release notes.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4ab5855abccf704cc4cdbafb0e995de0a0162af5
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 21:37:44 2020 -0700
+
+ Update 1.9.3 release notes
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d304f0ea2bfc48abc8c310828aa10c6d642065d0
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Jun 14 00:04:31 2020 -0700
+
+ altos: Leave floating printf enabled on m3 devices
+
+ These devices all use floating point computations, so leave the
+ floating point printf included in case they print one of those
+ values. If we run short on flash space, we can switch back.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 91b6d1e56a37a2cfae53c3727feaaa40505f48d9
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 23:39:00 2020 -0700
+
+ altos: Fix printf format mis-matches
+
+ Lots of values passed to printf are 'long' instead of 'int', so
+ fix the formats to use the right size indicator.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d0adf3f44b4a1b4bfc966dd4841c74157f60d604
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 23:36:13 2020 -0700
+
+ altos: Remove newlib-nano defines from Makedefs.in
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4802fe6dcae0e57c2e992dde008e3bcc84ea8d7f
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 23:13:35 2020 -0700
+
+ altos/test: Ignore ao_flight_test_mini binary
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f550b645438e9f41afe0a45ff09caf05cf20003f
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 23:12:55 2020 -0700
+
+ map-server: Manifest files are generated now
+
+ Ignore in .gitignore
+ Remove in 'make clean'
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 52e0efd79e9043cde384089863920986a7331764
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 23:11:49 2020 -0700
+
+ Add EasyTimer firmware to packages and Releasing
+
+ Make sure we include EasyTimer bits where required
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 00646d2700a2f4cf500e716e5a111057e3820475
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 23:09:54 2020 -0700
+
+ Check for picolibc when testing arm compilers
+
+ Remove configuration checks for newlib as picolibc doesn't need
+ separate configuration variables.
+
+ Make sure test program actually links as this tests to make sure
+ picolibc is working.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b9cc05bd3d417c957f47a64493f4a22caf660c55
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 22:40:42 2020 -0700
+
+ doc: Update for EasyTimer
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d2eee4b8a3f358e2d649096149f3cedc1a39927e
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jun 13 22:39:35 2020 -0700
+
+ doc: Avoid mis-interpretation of '+' in device wiring tables
+
+ Looks like asciidoctor does something magic with '+' characters in
+ table contents. Avoid this by using +++. Sigh.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d779d8e5b1106aaec6170761e6f5bd4e8d5ac6e7
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 9 11:48:17 2020 -0700
+
+ altos: Fix HAS_FLIGHT_DEBUG for easytimer
+
+ Remove baro-specific bits of the debug output when
+ there's no barometer.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d9c84d834f7fb4f36cee815dec2642737f73edc4
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 9 11:47:22 2020 -0700
+
+ altos: Don't include baro-specific config values for easytimer
+
+ These settings aren't used on easytimer, so don't include them in the
+ configuration system. This makes sure they don't appear in altosui.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 97cd271b3febf36d3e9943cea8d74332a128060c
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 9 11:46:31 2020 -0700
+
+ altosui: Remove six-axis pad orientation for easy timer
+
+ Wait until easytimer actually has six-axis support
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2781c187d58955bbac5c9fcf498c3b46a84a13d5
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 9 11:45:53 2020 -0700
+
+ altoslib: Fix easytimer voltage conversions
+
+ Battery and pyros all use the same circuit (100k/27k).
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b00a155bef319984ec2cf11898355edf94348a4a
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 8 22:08:28 2020 -0700
+
+ Add some release note notes
+
+commit 869bc258b727d2046835ac52a361d2ef529895ee
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 8 20:55:28 2020 -0700
+
+ altoslib: Add EasyTimer idle monitor support
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b07ca2827a498e6dd3c6b62819f71679291f9acc
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Jun 5 17:15:10 2020 -0700
+
+ Add EasyTimer configuration support
+
+ Needed six-axis pad orientation support
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fa30825d015d92bdbc95d2684386beef9fe9dc01
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 8 21:26:23 2020 -0700
+
+ altos: Leave accel data in ring raw; swap for orientation on fetch
+
+ Instead of re-writing the acceleration data in the ring to adjust for
+ pad orientation, just leave it alone and flip it each time it is
+ fetched. Much simpler this way.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c246a366a6e0117e70abafc30db71c0545b88f6f
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 8 21:05:17 2020 -0700
+
+ altos: Handle flight_log_max not being multiple of ao_storage_block
+
+ In this case, flight records start in the middle of an erase block, but
+ now end at the erase block before the next flight.
+
+ When checking for an empty log slot, the entire erase block containing
+ the start of the flight is checked to make sure it's clear, skipping
+ it if not.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 89726f5b1adceb243c5e2d5c958fc13c10f9a2d0
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 8 21:03:31 2020 -0700
+
+ altos: Round selected log size down to ao_storage_block multiple
+
+ There was some (broken) code that complained if the value set wasn't
+ correct, that has been replaced by code that accepts any value and
+ just rounds it down to a multiple of ao_storage_block. The code also
+ stops complaining when set to the current value when storage isn't
+ empty.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 936eceded2d08f4eb7318b28bd1be6cd3b06a7b3
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 8 21:01:31 2020 -0700
+
+ altos: Move ao_storage_erase to shared code. Add len
+
+ This makes ao_storage_erase take an arbitrary length. The new version
+ erases each storage block if there's any un-erased data present, and
+ then also checks after erasing to make sure the block is clear.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e142c4bd6f2fbab74fb7b7cea7e9a19234ed0123
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 8 20:52:09 2020 -0700
+
+ altosui: Adjust max log setting for storage block size
+
+ Need to round log sizes down to a multiple of the block size so that
+ erasing works sensibly on the device.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e4c93942bbde7a538d1dca114f20dc827275a8e1
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 8 20:49:42 2020 -0700
+
+ altoslib: Remember flight list in AltosConfigData
+
+ Do this instead of having to re-fetch and re-parse in AltosEepromList
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 00492a0801eb93ad98be496585741a025ffea16b
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu May 28 16:45:00 2020 -0700
+
+ altos: Initialize pyro code for easytimer-v1
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0f110d01245762d905ad5b7fd1fc7753e17fb249
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu May 28 16:23:44 2020 -0700
+
+ easytimer-v1: Enable pyro commands
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5bfcefc475698dada8be8a2d66afbfcc064d4612
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu May 28 16:23:09 2020 -0700
+
+ altos: Fix ao_ignite.c to work without HAS_IGNITE
+
+ Need to register commands even if HAS_IGNITE is not set
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0fb9e53a6b62c96d067e2974c5317e3bce638fb2
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu May 28 15:48:16 2020 -0700
+
+ altos: Build easytimer-v1 by default
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a901ec5fef409a6675c24518aead2925dcd66cc3
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Apr 8 13:43:22 2020 -0600
+
+ altos: add easytimer-v1 source directory
+
+commit 9416e5d71dc57df6612f62451433a34bf669b2cc
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu May 28 16:03:23 2020 -0700
+
+ altos: Allow flight support without logging
+
+ EasyTimer flies rockets, but doesn't have SPI flash for logging.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d4f1dd045465fbb7436a22d82b279319f7449fed
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu May 28 16:02:54 2020 -0700
+
+ altos: Allow BMX160 to be used as primary accel
+
+ EasyTimer doesn't have a high-g part.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d553e7448fe22f593eb8ab8246e872d856484bab
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu May 28 16:01:45 2020 -0700
+
+ altos: Allow igniter status beeping with only 'extra' channels
+
+ EasyTimer doesn't have main/apogee charges.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2f32a19aedb7d0e33899038e3fb04fe8a773291a
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Aug 12 17:00:47 2019 -0700
+
+ altos: Allow accel-only flight code
+
+ EasyTimer won't have a baro sensor, so we need some way to track at least
+ the ascent part of a flight.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6363403d6c08310a16769bf49b8acc45a08bd619
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu May 28 16:00:04 2020 -0700
+
+ altos: Allow MPU9250 SPI speed to be set by application
+
+ Rather than requiring 1MHz
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e5e7edb0aed5a183bbdd7484fec75a11160d01d4
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Apr 8 17:20:23 2020 -0700
+
+ ao-tools/ao-usbload: stubs in man page for missing options
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7797000eeaf11027200f12ee7f1eee5ed677f268
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon May 4 11:58:54 2020 -0700
+
+ Mark stm_interrupt_vector as const so it is READONLY
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2108da105ed9c915fc09d1251dc655bf11203d79
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Sep 15 17:05:17 2019 -0700
+
+ altos: Move from newlib-nano to picolibc
+
+ Use picolibc.ld, which involved some .ld file hacking, including:
+
+ 1) Defining ao_boot RAM address in the .ld file and declaring it 'extern'
+ 2) Changing how m0 interrupt vector got moved to ram
+ 3) Using -Taltos.ld instead of -Wl,-Taltos.ld so picolibc.specs wouldn't add picolibc.ld
+ 4) Placing romconfig vars in '.init.1' and '.init.2' sections instead of '.romconfig'
+ 5) Place code needing to run out of RAM in section .srodata instead of .ramtext
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 74d5dfd1801da8efbb7693a607fd25e35ad1158d
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon May 4 10:36:41 2020 -0700
+
+ ignore .map files
+
+commit f32488556ce25e439fbab941f8019db639824f98
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun May 3 20:01:14 2020 -0700
+
+ altos/lpc: Add explicit defines for all register groups
+
+ This lets the compiler see the constant address, rather than
+ having the linker stick it in later.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0459a4c7239c3017a61926bc8aab59e556b7eb5e
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon May 4 10:35:23 2020 -0700
+
+ Create map file for all programs
+
+commit 3d70ca6bae383878d8a7c13b862031531fa4ff81
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun May 3 18:31:19 2020 -0700
+
+ altos/stm: Make ao_eeprom_total a #define instead of a const variable
+
+ This is unused outside of ao_eeprom_stm.c, and as global const takes
+ up space in flash.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 9b62e2b4831eb90c65ecdf05c219e8711840ef1e
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu May 14 12:44:27 2020 -0600
+
+ point turnon_telemetrum_v2 to correct test script for v2.0
+
+commit 918865cca7297dde522e1886edf71b46d6ee2534
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Apr 17 12:53:47 2020 -0700
+
+ ao-tools: Declare ao_verbose as extern in shared header.
+
+ gcc-10 disables 'common' behavior by defaul, so we need to only define
+ variables in one location now.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c2acda26c1e4e0d7ffda9cd985180562f61aa88b
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Apr 17 12:51:13 2020 -0700
+
+ ao-tools: Use array indexing instead of addition to make gcc-10 happy
+
+ A struct with a trailing zero-length array (for variable-length data) is
+ treated as a zero-sized object when doing pointer arithmetic, but treated
+ correctly when treated as an array. This generates a warning from gcc-10
+
+ load->data + address - load->address
+
+ while this, which is 'the same', does not:
+
+ &load->data[address - load->address]
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 769f0e6049ae0440cf32f8cb0b5e504f67f5e911
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Mar 26 10:09:51 2020 -0700
+
+ Start release notes for 1.9.4
+
+commit a6687ce902a3011796aee93f87d08545e5f0cec9
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Mar 26 10:01:48 2020 -0700
+
+ altosui: Report baro ground alt for 'Pad Altitude' when GPS missing
+
+ The 'Pad Altitude' field in the pad tab of AltosUI was originally one
+ of three fields designed to report the GPS position of the pad. When
+ TeleMini was added, the code was updated to separate the lat/lon from
+ altitude display, but the pad_alt field in AltosState used for that
+ was still only computed from GPS data.
+
+ This fix gets rid of the confusing 'pad_alt' field in AltosState and
+ has the 'Pad Altitude' data select either GPS ground altitude or baro
+ ground altitude, depending on whether GPS data is available.
+
+ signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 455a059b9c44332b8dadd87fba31d194f66997b5
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Mar 21 21:13:08 2020 -0700
+
+ map-server: Create Manifest.txt at build time
+
+ This ensures the libraries have the right names
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c9c4c615578c94201140cf904cfd7e3334853973
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Mar 4 18:52:35 2020 -0800
+
+ doc: start release notes for 1.9.3
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d8716b015cfeb4955c0224c32d3c01e66b092209
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Mar 4 18:51:00 2020 -0800
+
+ doc: Document APRS offset configuration value
+
+ Update screen shots including this as well.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 47f4121ae6596bdf18566295df2fdbe94fe676b8
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Mar 4 18:23:14 2020 -0800
+
+ altoslib, altosui, telegps: Add configuration support for APRS offset
+
+ Configure the position within each minute that APRS transmissions
+ occur
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f4ff561bfaa7c59493eb9d6b99f0347db381a167
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Mar 4 17:26:49 2020 -0800
+
+ altos: add APRS 'offset' value to set APRS transmision time
+
+ This value is the offset from the top of the minute for the first APRS
+ packet in the minute. Subsequent packets will be transmitted
+ 'interval' seconds apart for the rest of the minute.
+
+ This allows multiple transmitters to be configured to share the same
+ frequency and not transmit at the same time.
+
+ Note that this offset only works when the device has GPS lock.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0fd503fb65d513f54dade10256545043725d83e3
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Feb 25 23:57:51 2020 -0700
+
+ update ChangeLog for release 1.9.2
+
+commit 28e77f3520095a1e47ab25721b186e42110ffd3e
+Merge: c6ea2666 91ab3acc
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Feb 25 23:57:31 2020 -0700
+
+ Merge branch 'master' into branch-1.9
+
+commit 91ab3acc113dc24e1ebce89875def646e590fb12
+Merge: 243a6b5e aae87fe9
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Feb 25 23:55:29 2020 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit aae87fe9fa8d596fea6cc19d4701a7583255150f
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:08:58 2020 -0800
+
+ Bump version to 1.9.2, android 27
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ec46adee44ea08120b1940ca55a5fbdf56874bb1
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:07:15 2020 -0800
+
+ Bump java lib versions in preparation for 1.9.2
+
+ Quite a few changes; let's bump the version so we don't end up with
+ the wrong version on some machine.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 45f7b91ea126f8f9e607a8ee53df655d992590f2
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 22:51:54 2020 -0800
+
+ libaltos: Create altos_pause_one_second API
+
+ This is to wait for the reading thread to stop using the file object
+ while cleaning up.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 243a6b5ee60989ec4c04b8a7638907d2517d4926
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Feb 25 23:18:11 2020 -0700
+
+ update copyright assertion in TeleLaunch manual
+
+commit c6ea266630b9eef7a80e267a4430d22d50954908
+Merge: 12d6b4dc 7d2b2bae
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Feb 25 23:17:22 2020 -0700
+
+ Merge branch 'master' into branch-1.9
+
+commit 7d2b2bae8a7ed2e15040c58819c8e96215e8292b
+Merge: af8f0b58 0993f791
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Feb 25 22:56:07 2020 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit cec4dea23b7b3cfe0f0a43c19b3118cc98cb9414
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 21:50:10 2020 -0800
+
+ altoslib: Remove debug printf from AltosIMU.java
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0993f7913efb3bc217df6ed2b38b5f6ad018b95d
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:08:58 2020 -0800
+
+ Bump version to 1.9.2, android 27
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 76b288f8d02e0a48f04de9455a2dd0b77e48bd63
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:07:15 2020 -0800
+
+ Bump java lib versions in preparation for 1.9.2
+
+ Quite a few changes; let's bump the version so we don't end up with
+ the wrong version on some machine.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit af8f0b5892e01bdcf9fa4ca86a4752a8294992a1
+Merge: 25c1ef61 65df207e
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Feb 25 22:44:08 2020 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit 8011baae420bb96ec487bfb343a761af70dd980d
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:24:23 2020 -0800
+
+ Set doc version and date from package version and release date
+
+ This is a bit less work than manually updating them.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 65df207e00545ccd380ff7a80933b2d223c1544b
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:08:58 2020 -0800
+
+ Bump version to 1.9.2, android 27
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a74e4816b669346fac1c72cfc629d11e2ca5e336
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 21:42:29 2020 -0800
+
+ altoslib: Add TeleMega-v4 adxl375 config to AltosConfigData
+
+ Needed for idle monitor to work correctly
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 528fdc4e03466430c8d81fc78c90d3c9e8465ca7
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:07:15 2020 -0800
+
+ Bump java lib versions in preparation for 1.9.2
+
+ Quite a few changes; let's bump the version so we don't end up with
+ the wrong version on some machine.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 25c1ef61b9c791b8e55b7d0ebd948ece4ca954c7
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:08:58 2020 -0800
+
+ Bump version to 1.9.2, android 27
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 61d3064e7c4958036e241381aa4ab791582820f8
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:24:23 2020 -0800
+
+ Set doc version and date from package version and release date
+
+ This is a bit less work than manually updating them.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 52149fd81df45f37f5097850795f290f463c43ef
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 17:07:15 2020 -0800
+
+ Bump java lib versions in preparation for 1.9.2
+
+ Quite a few changes; let's bump the version so we don't end up with
+ the wrong version on some machine.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 9ad50b83eca7aea8c9e568a661fcdd98598d0c73
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 15:35:33 2020 -0800
+
+ altoslib: BMX160 driver now returns µT values for mag sensor
+
+ These are converted on-board using calibration values provided with
+ the chip.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ff2dc6ea0e62f6534b5fb1b0ec2edd4702cf4a41
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 14:57:35 2020 -0800
+
+ altos/bmx160: Compute µT in bmx160 driver using trim data
+
+ Instead of attempting to ship all of the trim data, compute µT
+ on-board. This means losing the raw sensor values.
+
+ The compensate functions were taken from the bmm150 sample driver
+ provided by Bosch under the BSD 3 clause license.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 9aedcdcab2c24b804236a5b8f99da634cac7ba05
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 11:58:17 2020 -0800
+
+ altos/telemega-4.0: Fix signs of IMU pitch and mag across
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0ab2332358eb0990cb55074001b675d390eae2ca
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 11:55:36 2020 -0800
+
+ altosuilib, altoslib: Add azimuth and compass to reports
+
+ Here, azimuth means change in horizontal plane from launch.
+ Compass is reporting mag field strength in X/Y plane
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 97cb2a808ad8853cead2d9722b7258b1b62df7a4
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 11:54:11 2020 -0800
+
+ altoslib: Remove hard-coded accel scale for mega eeprom
+
+ I don't know why this is using a hard-coded value which only matches
+ early TeleMega v1 boards.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a4039a60bbe972fd022699d62ab06a8f1bc4af69
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 11:51:57 2020 -0800
+
+ altoslib: Correct sign of telemega v4 pitch
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 88cf92175a4524143349491a817c9037dd8c39ef
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Feb 25 11:57:21 2020 -0800
+
+ libaltos: Delay freeing serial device until not busy
+
+ Just spins for a while waiting for reading thread to wake up and
+ return.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 017e7ed4d2eea2bbc01972a8dfe11babd42d5993
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Feb 23 16:43:23 2020 -0800
+
+ altoslib: Fix Tmega v4 eeprom parsing
+
+ Mangled the source while hacking things somehow; both accel and gyro
+ corrupted.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a5a8a4d8de49484a2edba62cc9b84377aa5415a6
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Feb 21 00:19:25 2020 -0800
+
+ altos/altoslib: BMX160 Y axis gyro direction is opposite from MPU
+
+ Just need to flip the sign to make the values go the same direction.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3db6d4698d05c5017565a25b9b5c0f538014bebe
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 23:43:01 2020 -0800
+
+ altos: Adjust comment about how the BMX160 is oriented
+
+ Bdale promises to make them all the same.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 101d068b92031169e2b11350528be0833ff2f8ea
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 23:42:24 2020 -0800
+
+ ao-tools: Handle TeleMega v4.0 telemetry in ao-telem
+
+ Same packet format as older telemega, but axes differ
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6c68e96ef650b2a149064069e26a4dc3ac741d42
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 23:41:27 2020 -0800
+
+ altoslib: Correct IMU axes for telemetry data
+
+ The telem data was assuming original TeleMega sensor orientation.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 88cb0f4a791e0867ccd279e6d244d94f0b1765e9
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 22:53:31 2020 -0800
+
+ altos: Init BMX160 more carefully
+
+ Check accel and gyro power status after turning them on, waiting
+ for a while to see if they actually power up.
+
+ Read more registers after configuring accel to try and get things
+ reset better.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+ Oops.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0ca9a7c6fc914c4b555c99863828861ec54fa01d
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 22:44:54 2020 -0800
+
+ ao-tools: Add TeleMega v4.0 to ao-eeprom
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5e8de5a2cef200c1426674859967edc0fdd13663
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 22:35:54 2020 -0800
+
+ altoslib: Remove ADXL375 debug noise
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 67356ae163487e57e6d9c83cb2b7f71a69f8aa27
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 16:51:15 2020 -0800
+
+ altos: Get BMX160 initialized correctly
+
+ 1. Don't reboot at startup. This probably takes a lot longer
+ than 100ms.
+
+ 2. Power up acc and gyr before attempting to configure
+
+ 3. Clear data registers after setting acc range
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ee38b3bea20f1e3a73e67aea151f9fc6abdc8483
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 16:23:33 2020 -0800
+
+ altos: Copy BMX160 data to data ring
+
+ Otherwise you get a lot of zero
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 58976653e5d4b8eff1781e69115c4b7e86db045a
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 20 16:12:43 2020 -0800
+
+ altos: Log BMX160 data when present
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4b824da227f08e45f7a1a59661b8c0fe45068d60
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 19 14:30:50 2020 -0800
+
+ Bump version for new android upload
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 95fe82630797bae5a9a7ffacc871bbd00efe2d82
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 19 14:01:15 2020 -0800
+
+ altosuilib: Eliminate a couple java compiler warnings
+
+ Were using new Integer(int), when just passing the int would
+ 'auto-box' as necessary.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 76c5e6bf7ecc30ae77a9744a4af26dca3dc46254
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 13 16:00:43 2020 -0800
+
+ altosui: Add TeleMega v4.0 firmware to altosui packaged bits
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3055f698e0426d7785843ea1668478375fd02642
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 13 15:59:25 2020 -0800
+
+ doc: updates for 1.9.2
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8ac11767a1b8d3e2faf6f020f5161ed05b801070
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 13 15:39:08 2020 -0800
+
+ altoslib: Pass all flight records while reading telem file
+
+ This makes sure we get complete GPS and setup information before
+ the flight starts.
+
+ To make this work, have data skipped when building time series
+ instead, and have realtime replay fast-forward through the initial
+ data
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit da499044c9d66e42915e3f6429b6b86999b06c2c
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 13 15:38:34 2020 -0800
+
+ altosuilib: Put units on GPS altitude and height in info table
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 305e7852f764e6a06024a9d57b5766d2f8a056ee
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 13 15:36:57 2020 -0800
+
+ altoslib: Report raw baro height instead of kalman filtered value
+
+ Report raw sensor values to the user during flight.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5ff0442702ee41179341240b1bbf290be89e1718
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 13 15:06:45 2020 -0800
+
+ altoslib: Re-initialize cal data for eeprom record set
+
+ Instead of leaving it uninitialized, restore the initial data from
+ the flight log.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 58e7fccc24f933fd64e272207f783ca79002b7ba
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 13 15:04:40 2020 -0800
+
+ altoslib: Report whether GPS data contains new location/sat info
+
+ Use this to limit time series additions to fresh data.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f2e45e4b1351ce505b9294d5dc25429ab9721e62
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 13 15:00:55 2020 -0800
+
+ altoslib: Move 'state_name' API to AltosCalData
+
+ That's where state lives.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f400b8dd98680e47645d43940bcff5c0c99bb9e9
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Feb 13 12:15:01 2020 -0700
+
+ include TeleMega v4 in list of firmware included in fat build and LLC repo
+
+commit 06cf43cea9149f8c04c80785a613408454eab4f2
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 12 20:07:02 2020 -0800
+
+ altoslib: Add support for TeleMega v4
+
+ TeleMega v4 has a new IMU chip, which required adding support for
+ multiple IMU types, including different scale factors for each mag
+ sensor axis.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f51ad734dfccfa2d4b7515a94dc337eb2b2708a2
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 12 20:05:31 2020 -0800
+
+ altoslib: Store IMU accel ground data in converted values
+
+ For some reason, this value was in sensor units.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b2deef36f135b52ba2eea3042e9d1a1198d4a9ae
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 12 20:00:22 2020 -0800
+
+ altosuilib: Add fourth column to info table
+
+ Holds IMU data and igniter voltages
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4435843fc8eb06751dbb1ba00fb2856563963e5e
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 12 19:59:19 2020 -0800
+
+ altoslib: Add 'gauss' units for magnetic field strength
+
+ Compute in gauss, but display in nT (G * 100000)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ea4140a81dc4ec6e541512ed70861691b57c4904
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 12 13:00:18 2020 -0800
+
+ altos: Create new log format for TeleMega v4
+
+ Has BMX160 instead of MPU9250
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 440292f53125d7da29b3b4e8caa2c94c557b8325
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 12 13:01:08 2020 -0800
+
+ altos: Add new telemetry packet format for TeleMega v4
+
+ Bmx160 instead of MPU9250 changes orientation of IMU data
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cff5506e97314bf9b34d80a01cbdfcad22f3ce08
+Merge: e220b00d 803e260d
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Feb 12 12:55:04 2020 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit e220b00d5c3af42dd840dbd34fba264e11046fc6
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Feb 12 12:54:38 2020 -0700
+
+ update TeleMega production scripts for v4.0
+
+commit 803e260dcf9beba5684c4dcdda14255d76b2e551
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 12 11:53:25 2020 -0800
+
+ altos: Fix wiring mistakes for TeleMega v4.0
+
+ Enable SPI 1 on PB3 PB4 PB5 (just sets output pin config)
+ Disable I2C (we're not using)
+ Fix Pyro channel C port (port D, not port B)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e64b1bc108bd75bcd6271631e48abde84af4631f
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 12 11:37:05 2020 -0800
+
+ altoslib: Reset consecutive GPS count when GPS bad
+
+ This makes sure we get back to 'GPS not ready' when GPS goes unlocked.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ae38a6b5c6cb6c7d89b3237623a890e5101e282b
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 10 14:25:55 2020 -0800
+
+ altosdroid: Change layout of idle mode dialog a bit
+
+ Stick 'callsign:' label and callsign on same line. Save a bit of vertical space.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ddd0c7b57aca8fe7e68c0b8dae21ba79e163db15
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 10 14:25:26 2020 -0800
+
+ altosdroid: Make frequency changes during idle mode work
+
+ Otherwise, we'd end up sending a freq change over the link, which
+ would do 'bad things'.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 9697da4767bceb07c4ec070e1537ff4f91a74a87
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 10 13:55:37 2020 -0800
+
+ altosdroid: Use select tracker dialog when deleting a tracker
+
+ Remove custom delete tracker dialog code.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0b7b31793dc91a25d215c216e8db481d549e66ad
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Feb 8 23:59:44 2020 -0800
+
+ Bump version to build a new android app (25)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1df1efc7a022597287722dc3a34d3a678fde6d3b
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Feb 8 23:55:58 2020 -0800
+
+ altosdroid: When the user switches frequency, look for something there
+
+ Instead of sticking with the original tracker serial, when the user
+ selects a new frequency, check to see if some data appears there and
+ switch to that tracker.
+
+ Only do this once, and stop looking if the user selects a tracker.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a88989faebdc3a4b5198c4150096e6f626d76a96
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Feb 8 23:09:50 2020 -0800
+
+ altosui: Set idle mode frequency before starting link
+
+ This makes sure the link doesn't try to start at the wrong frequency.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 96bdc1585d89e09381bd164dfb2ea41e8257df26
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Feb 8 20:46:19 2020 -0800
+
+ altosdroid: Add helper 'makefile'
+
+ This builds the app from deep inside the source tree.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 41ad298abe24cfef0a9db0259436b998a66e4208
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Feb 8 20:45:50 2020 -0800
+
+ altosdroid: Ignore 'build.gradle', which is built from a .in file
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 79f2677143f85a2807b8d4e297f3617aafbd34da
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Feb 8 20:44:10 2020 -0800
+
+ altosdroid: Change tracker selection dialog
+
+ Create a table of trackers and allow sorting based on each column.
+ When a tracker is selected, the app will not change to another tracker
+ automatically.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6e3c4493cfa8d92d96808d14d1c12abb35ecb442
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Feb 8 20:42:11 2020 -0800
+
+ altosdroid: Fix a pile of compile warnings
+
+ This deletes code which doesn't do anything in API versions past 21 and
+ changes a few bits of code to use the newer supported way.
+
+ No functional changes are intended...
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a4fc7db3bc82d4a2222bcfc0cd33b298bc5d3430
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Feb 7 22:00:53 2020 -0800
+
+ altosdroid: Use custom dialog themes for all dialogs
+
+ Instead of a mixture of custom application and standard dialog themes
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 953caffcb87f3aae5962ee2540eef9310c84d32d
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Feb 7 20:47:33 2020 -0800
+
+ Bump version to build a new android app (23)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d84a777f07c9a876acdcda44ebc9186ef226d896
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Feb 7 18:44:14 2020 -0800
+
+ altosdroid: Add text size selection
+
+ Add a setup menu item to change the size of the text everywhere.
+ This involved re-doing the layout for most of the tabs.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 33be3363985ec4998c1ae09cab7969aebf775b60
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 6 23:32:24 2020 -0800
+
+ Bump version to build a new android app -- 1.9.1c
+
+ This will suffice until we ship 1.9.2
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d0891fbdcc13a61836462525edab776366f86a24
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 6 23:21:02 2020 -0800
+
+ altosdroid: Check if the telem service is running when bluetooth gets enabled
+
+ Make sure we aren't trying to send a message when the telem service is
+ shut down and the pointer is null.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5186c6f64b374404aeb88b64227a006a58634ab9
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 6 23:17:30 2020 -0800
+
+ altosdroid: Request fine location permission if not already granted
+
+ This avoids crashing if we don't have access to fine position
+ information.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 273bae40dfabc3249acd4427d92abb2ed9fefa6c
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 6 17:15:14 2020 -0800
+
+ altosdroid: Switch to NotificationCompat
+
+ Instead of Notification, which doesn't appear to work on older android
+ releases.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fc73795cd3ad95d8f177a2eb3792d8ed0c7c540f
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Feb 5 10:52:05 2020 -0800
+
+ Use 'must' instead of 'should' in reference to switch for pyro battery
+
+ Make this consistent with docs for other boards.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ad947ec3f313bbd1295af5dc64f1af9ec09bfe27
+Merge: 5b1bd4f8 d8e9d152
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Feb 5 11:48:13 2020 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit 5b1bd4f87f682c1956e173a27414ceb076b20ceb
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Feb 5 11:46:36 2020 -0700
+
+ update info on using separate pyro batteries to encourage including a switch
+
+commit d8e9d1529cb744742cfd7d4f5e9f168d4d6dc498
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jan 28 12:57:25 2020 -0800
+
+ Bump altosdroid version to 20, always build release apk
+
+ Now that altosdroid doesn't need a maps key, we can always build the
+ release version. New version is 20 instead of 19 because I messed up
+ the upload and google play store is harsh.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 65169d0b33ce6651508127a5ca45b6de27616352
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jan 28 12:56:27 2020 -0800
+
+ Force using opensdk-8 to build altosdroid
+
+ Current gradlew doesn't run on newer java
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit db786c24510d2df8f5a5d3ec0931deaa252469ad
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jan 28 12:55:47 2020 -0800
+
+ Generate altosdroid/app/build.gradle at configure time
+
+ This file includes the release version numbers, which are set in
+ configure.ac.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ffbf340c516a7fff7c95b808586f623269fe4338
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 23 17:40:30 2020 -0800
+
+ altos: Always start application if boot pin isn't in use
+
+ When there's no 'force boot loader' pin, jump to the application
+ instead of stopping in the boot loader.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ee009332a17557076f4c9348a31658f5bf605240
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 23 17:31:13 2020 -0800
+
+ altos: Disable ao_btm debug. Avoids breaking 's' command
+
+ The 's' command is used by altoslib to get the RSSI value during
+ monitor idle operations. Let's avoid breaking that.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ced64381edf2478cd080a340a0f88b3d98a1b13d
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 23 14:34:14 2020 -0800
+
+ altos: TeleMini beeper is on Tim2 CH4, not Tim3 CH4
+
+ This makes the beeper work.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 539598ce53744f7d70dad482e8865d427fca2fa2
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 23 14:32:10 2020 -0800
+
+ altos: Make debug telemini firmware a bit easier to build
+
+ To enable debugging, we need to stop using the SWD GPIO pins, which
+ are normally used to trigger boot-time firmware behavior -- SWDIO is
+ used to force entry to the boot loader while SWDCLK is used to force
+ default frequency and callsign.
+
+ This patch makes it easy to edit ao_pins.h to disable the default
+ frequency option.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 54e98a498db0d7026ce16c3ad53bc60986c68253
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Jan 22 12:41:40 2020 -0800
+
+ altos: Use AO_TICK_TYPE/AO_TICK_SIGNED for lco/pad code
+
+ Was using 16-bit types, which 'mostly' worked, except that the pad
+ code compared ao_time() with a 16-bit value when determining the radio
+ status. After the box was on for 10 minutes (timer wrapped), the RF
+ timeout check would always fail, so the red LED would be lit.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 366c1422f6d34c8f616dc95c2767d01c4f53f581
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jan 6 00:18:25 2020 -0800
+
+ altos: Build TeleMega v4.0 bits
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit eae79e1429f1df53577f4ee78e8a0856a8ad5975
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jan 6 00:16:15 2020 -0800
+
+ altos: Initial bits for TeleMega v4.0
+
+ ADXL375 and BMX160 instead of MMA655x and MPU9250
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c7031c5abbb56b99b067fb8705c8c32695c70e46
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Dec 10 18:17:42 2019 -0700
+
+ doc: update copyright year in footers, note need to check this doc/RELNOTEs
+
+commit b7ce0474eb30c0fb7e08f26891eb40f208de6a96
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Dec 9 03:51:02 2019 -0700
+
+ Releasing: add TeleMetrum v3.0 firmware to production list
+
+commit 5565bc256ccf1f32474d7080fe0f75ce4fad4dc1
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Dec 5 23:16:34 2019 -0700
+
+ Releasing: capture notes from 1.9.1 release
+
+commit 12d6b4dc6ec0a18bb6b1e3dfddbb9d6f00f76f99
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Dec 5 22:22:32 2019 -0700
+
+ update ChangeLog for 1.9.1 release
+
+commit fdf1dbd3d945f6f34f404ffbcb57781f4df23015
+Merge: 5b4da841 bfc4999c
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Dec 5 22:21:29 2019 -0700
+
+ Merge branch 'master' into branch-1.9
+
+commit bfc4999c99dc7ba29226a956f3991c2a45a1dd88
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Dec 5 22:18:12 2019 -0700
+
+ update release date in all documents
+
+commit 55af5c3a0df734cedbac98bbe350846add45d5e3
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Dec 5 22:15:21 2019 -0700
+
+ start the process of releasing 1.9.1
+
+commit 2ff2b4962f3241ede9a7718e373a68296c4e308a
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Dec 5 21:05:28 2019 -0800
+
+ Release note about self-flashing on windows waiting for devices
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 695dba4e37ccca9a2dc06e1656699a13406002c1
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Dec 5 16:59:40 2019 -0800
+
+ altosuilib: Wait for Windows to get ready with new device
+
+ Windows appears to report the new device path long before
+ the path is actually usable. Stick some long delays trying to
+ open the device before giving up.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2b3c6806a3039ac8c4c1a1e2d6715b0cdc5b9632
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Dec 3 19:34:06 2019 -0800
+
+ altosuilib: Show the recovered product name in the Configure Rom dialog
+
+ This lets the user know that things are actually working as expected
+ as the correct device name should appear in the dialog.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5bdf8eeb1cdc1a50c9abd0f8962533f6970bd7f0
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Dec 3 19:31:34 2019 -0800
+
+ altoslib: Linker script changed -> the USB desc is two bytes off
+
+ The USB descriptor used to be at 0x0800110c in previous releases and
+ is now at 0x0800110a, presumably because the linker script changed the
+ padding requirements of those sections.
+
+ Search forward and backwards two bytes to see if we can't find the
+ descriptors by checking for the descriptor value and size at each
+ location.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 946faa1541f69c6cf2759c13760fa9bc16e2298e
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Nov 26 15:47:07 2019 -0800
+
+ doc: Update docs to reference TeleMetrum v3 where appropriate
+
+ Mostly just add 'or newer' to various TeleMetrum v2 bits. Also add
+ specs for the v3 board.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 68aa05881239264b95e37c648faa821fd0230402
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Nov 26 15:33:25 2019 -0800
+
+ doc: Mention TeleMetrum v3.0 in release notes for 1.9.1
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 56767df42a2582c9663554f27b354c2b9c180119
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Nov 25 18:38:14 2019 -0800
+
+ ao-telem: Show all 24 bits of GPS altitude data
+
+ Need to mix in the upper 8 bits from devices which include them.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4a47071b7f23874ca3d889ba18cd218d6445df29
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Nov 25 18:36:16 2019 -0800
+
+ altos: Send "metrum" telemetry packets for TeleMetrum v3.0 boards
+
+ This includes the ADC values, which report igniter continuity
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 66b6b2d5fb1313d5e16a3f802c2af8cc6585362b
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Nov 25 18:15:16 2019 -0800
+
+ altoslib: Set up adxl375 for TM v3.0 in idle mode
+
+ Need to select axis and polarity for each adxl375 product.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 9bb091f6d6aec6e5e887eebc93174106b25a7a98
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Nov 25 18:02:06 2019 -0700
+
+ ao-bringup: add production test support for TeleMetrum v3.0
+
+commit f95b359aa1a3ba3982a162bdf398d0b261806d47
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Nov 25 17:57:27 2019 -0700
+
+ altosuilib: TeleMetrum v3, like v2, doesn't use flash for config
+
+commit 8554da3b6c05c1094045f4fb21b43c183029408f
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Nov 25 17:55:10 2019 -0700
+
+ altosui: add TeleMetrum v3 to delivered firmware list
+
+commit 0072e9741719367a1f6748d242cd6195a1a7c6a5
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Nov 25 17:50:41 2019 -0700
+
+ altosui: add monitor idle support for TeleMetrum v3
+
+commit 6d55d03587e9f71a7e8320a6b36fde25edc63b28
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Nov 22 17:18:58 2019 -0800
+
+ altos: TeleMetrum v3.0 has ADXL375 and Max-8Q
+
+ Replacce the mma655x driver with the adxl375 driver
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b215bed45798ea30f8f13128204493e7afdc9af1
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 27 10:24:52 2019 -0700
+
+ altoslib: Fix original telemetry sensor packet parsing
+
+ ground_pres is at byte 24, ground_accel at byte 26. These were flipped
+ around.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cdbc29d6d86c69e70b0f105d273ee8ddd7ae290e
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 27 10:24:10 2019 -0700
+
+ altoslib: Fix setting of CLASSPATH
+
+ Need to include bin for local files.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3aeb1a310069811a2e043a5df28dc2df17436fc4
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Oct 23 10:43:54 2019 -0600
+
+ doc: add some text about cross-bank drag race safe/arm to TeleLaunch manual
+
+commit 1cb529e0532d0a7430487c856bb9b037ff6cea0f
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Oct 23 10:41:30 2019 -0600
+
+ doc: add some text to TeleLaunch troubleshooting about SAFE/ARM on TeleFire
+
+commit 88e279b15b3d2357f142e58d20d73c24bf2561eb
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Oct 23 09:24:18 2019 -0700
+
+ altos: Improve labeling of telefire receive packet information
+
+ Avoid the use of 'cmac_recv', which is not exactly descriptive.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c31db066e5ba7a6708ebe4bf350963697c611816
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Oct 23 09:20:53 2019 -0700
+
+ altos: Relabel packet receive status line for TeleFire boxes
+
+ The status line included return value and RSSI, but neither was
+ labeled, which left the user unsure as to what it meant.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b6602d8c4053932a72c2bf4a63e24793634b2ad0
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Oct 22 09:30:25 2019 -0600
+
+ doc: add more text to TeleLaunch manual, be less sloppy with dBm assertions
+
+commit c349eb9d1b90abd7c0492b5d0ba2116ae5ad6ec2
+Author: Mike Beattie <mike@ethernal.org>
+Date: Sun Oct 13 20:22:37 2019 +1300
+
+ Update app to use Material Design Light theme
+
+ The Holo theme does weird things these days
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit b8560bd91d603e4697f0cddc095952f923366d30
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 18 01:06:55 2019 -0700
+
+ altoslib: Don't bother adding FREETTS to CLASSPATH
+
+ altoslib doesn't use freetts at all
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4696687ef84181e363ac79f43016d347d7e14a23
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 18 01:05:15 2019 -0700
+
+ altosdroid: Make altosdroid code more resilient to weird androidisms
+
+ Sometimes altosdroid was crashing when messing with configuration bits
+ like selecting different themes. These fixes seem to make that happen
+ less.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8be4e3b8faac362665641e98a1df1e1e8a681b7a
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 18 01:02:51 2019 -0700
+
+ altos/test: Get test code working again after restructuring
+
+ Something changed, the test code wasn't building. Now it does.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8d5792e32dc35441ec98339149fb4df3cc16f44b
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Oct 17 23:09:47 2019 -0700
+
+ altos/telefire: Don't arm the box if the local arm switch is off
+
+ This skips arming the box when the local arming switch is off. This
+ keeps the siren and light from going off, and also avoids attempting
+ to fire the channels in case something else screwy is going on.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 75cd8196ee9ba4ed983abdc83f1fe60fb94f2866
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Sep 30 21:15:56 2019 -0600
+
+ TeleFireEight has simple green LEDs for continuity
+
+commit ff68c8855bc6983638db5102ffbc6822b83edb5d
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Sep 25 13:10:36 2019 -0700
+
+ telegps: Get --graph mode working after recent changes
+
+ Was just exiting due to a null pointer exception caused by mis-ordered
+ setup of the map data. Also using stale API.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 35351c7db337c4384ef642fbc8b8676f0944686a
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Sep 25 13:09:22 2019 -0700
+
+ altoslib: Don't crash when map flight data is missing
+
+ Just a couple of null pointer checks to allow the map display to come
+ up even when no data are available.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4df77f2ac7f34986b8e7c0584c57d77dc74d9df9
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 24 20:49:56 2019 -0700
+
+ doc: Update for 1.9.1
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 51cca3b3405da7408fd8af18f8d1ff7db97fe1bc
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 24 20:50:08 2019 -0700
+
+ doc: Describe new 'show nearest values' in map view
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6032ca7f418924e5794a886c06ca752dee0ada83
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Sep 23 12:40:19 2019 -0700
+
+ altos: Rename 'log' in ao_log_fireone to 'ao_fireone_data'
+
+ Avoids conflict with global 'log' function
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 77e6bad5e66023e487430ef31244edaeaef7c606
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Sep 23 12:39:42 2019 -0700
+
+ altos: Switch all main() to return 'int'
+
+ Makes gcc happy
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3979c88417fd5512447f5d02cc660522dff5d9d6
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Sep 18 17:38:44 2019 -0700
+
+ altosdroid: Update Makefile.am to run gradle-based build
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d607cbee5c9b406ef0f4e522c12e56993632cf00
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Sep 18 17:10:14 2019 -0700
+
+ altos: Add missing build files for avr/attiny devices
+
+ These were sitting in my src directory but not in git
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 260dd06107c8f8f5c7e606a283d388cb3ba46465
+Merge: 28618a72 faa5abe0
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Sep 18 16:26:44 2019 -0700
+
+ Merge remote-tracking branch 'mjb/android-build-update'
+
+commit faa5abe0bc9aa071ffa55534a24638bc0972e3c2
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:26:40 2019 +1200
+
+ Update Google Maps API usage.
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 3af69b00a94b473dbc98fcf6d26fa90b66065e8b
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:25:47 2019 +1200
+
+ Update persistent notification in TelemetryService
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit be9ed3ffc9b00c97e8513bbfab23b8e16329bc4b
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:25:09 2019 +1200
+
+ Convert to AndroidX from support_v4
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit d7ef39ba104a1ac6024af875c730a645f282719f
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:24:13 2019 +1200
+
+ Import cleanup
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 5c1acdabd211346936423ec8bc147a47f62bb8ae
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:19:11 2019 +1200
+
+ Commented out duplicate strings
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit ffdac6b48b43dc5610ddb926191a7cff738c97de
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:18:48 2019 +1200
+
+ Indentation cleanup
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit b6cb79994a58f37f6c743c1f2fafe30337e89d79
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:17:52 2019 +1200
+
+ Add FOREGROUND_SERVICE permission which is now required
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit f2c652d5115eb64568d9ae8ed6426a16e6154999
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:17:09 2019 +1200
+
+ Remove versioning data from AndroidManifest.xml.in
+
+ (now in build.gradle)
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 198c868a25b3cbcde9634bbbcce57d71f3659eee
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:16:18 2019 +1200
+
+ Clean up duplication in AndroidManifest.xml.in
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 1ba8ffe41defe411390197c56b03762fa51c20bf
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:12:59 2019 +1200
+
+ buildinfo data comes from Makedefs now, not Version
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 3c4d4d5cc1a8361a713aba075b29c3f6509f3f90
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:12:30 2019 +1200
+
+ Add gradle build files
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 70fb078cac4203e76e04211a0b8f1a6eceb6298b
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:09:26 2019 +1200
+
+ Update files that reference new paths
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 8b53f860eb3171cd43e4bd0e440f2889bd810662
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 10:04:58 2019 +1200
+
+ Move java source, and resources to new paths for gradle
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 4a257455b2dc57069c41e1845daf66239c5cbe1d
+Author: Mike Beattie <mike@ethernal.org>
+Date: Thu Sep 19 09:58:06 2019 +1200
+
+ Remove ant build files
+
+ Signed-off-by: Mike Beattie <mike@ethernal.org>
+
+commit 28618a728e85b70ecac73983531894a25e90d7f6
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Sep 16 13:12:08 2019 -0700
+
+ altos: Add EasyMega v3.0 bits (not setup correctly yet)
+
+ This adds a new directory for EasyMega v3.0, replacing the mpu9250
+ with a bmx160.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 28add4f616dbaf06a1ca3234b81c68c4a299d056
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Sep 16 13:10:09 2019 -0700
+
+ altos: Integrate BMX160 into data code
+
+ Get conversion functions written and fix up a few warnings
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a87698663f8a5ced468755068a0468755d8f2746
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Sep 16 12:39:09 2019 -0700
+
+ altos: Add bmx160 driver
+
+ This just adds the driver, it doesn't hook it up yet
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 99525a748e00406424b98a0952f0156437b30b6c
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Sep 15 17:09:26 2019 -0700
+
+ altos: Replace ao_xmem functions with direct mem calls
+
+ We no longer need to wrap these functions
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 46d3cbadce6808b4cd29ad1e034efac7b5e4fa42
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Sep 15 17:05:59 2019 -0700
+
+ drivers: Use 'main_value' instead of 'main'
+
+ GCC can emit a warning when programs redefine 'main'.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2524730217e6972f3d0f04a9954350ba1964a83a
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Sep 2 15:20:14 2019 -0500
+
+ altosui: Add speed and gps height to map display data
+
+ And generalize the API so that any other GPS data could be added in
+ the future.
+
+ This feature was proposed by Mike Beattie
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b13893245e8c66b48e23bb2005ef6ce46e69744f
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Aug 31 23:20:31 2019 -0500
+
+ altosui: Display data for point nearest cursor in map view
+
+ Include time, lat and lon
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 936a5ff21d01db6f0084ee7e4712042c914942a5
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 28 22:40:21 2019 -0500
+
+ libaltos: gitignore btletest
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 252009db6451f01c9707970d05e69f39e3a047dd
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 28 22:39:25 2019 -0500
+
+ Add .gitignore files for new projects
+
+ EasyMega v2.0
+ TeleFireEight v2.0
+ TeleFireOne v1.0
+ TeleLco v0.2 with cc1200 radio
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 415302a81f7bf0cdfd79999e1fcd5ea41dc39d13
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 28 22:34:53 2019 -0500
+
+ icon: Ignore generated LED images
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 025c53a14804385ad96afcc9bf29a8d5c202a93a
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 28 22:33:35 2019 -0500
+
+ Add new altosdroid icon
+
+ Remove drop shadow
+ Change size to make Google happier
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fcb5d55e94058810fc8b31ad5e8caa99fa61200c
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Aug 12 17:30:48 2019 -0700
+
+ altos: Use fast timer for buttons instead of edge-triggered ISR
+
+ If the button bounces between the triggering interrupt and the button
+ state check, we could lose the final state change of the button and
+ send an incorrect event to the application. In the worst case, the button
+ would end up in exactly the wrong state, toggling in the wrong direction.
+
+ Use the fast timer to poll all buttons instead so that there is only
+ one check of each button at each poll interval (instead of the
+ interrupt and the state check). This makes buttons reliably debounced.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5e738fd2e3602c6a92f205df99361dbe06c1719e
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 4 21:12:29 2019 -0700
+
+ altosui: Make it possible to disable APRS
+
+ The menu says "Disabled", but the device wants "0". Translate back and
+ forth to avoid an error.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1105cfe0c065483e8a97a800bc870fbdecaab9b6
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 4 20:33:21 2019 -0700
+
+ altosui: Fix path to easymini-v2.0 ihx file
+
+ This gets the bits included in macosx and linux builds
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 489b429dbeb8b0fb69881161ff32fdc2fdfcf9f8
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 11:15:20 2019 -0700
+
+ altosdroid: Hack up build to 'work' for now
+
+ Android apps are now build with gradle instead of ant; the ant bits
+ are stale and only work with old java. Use old java to run ant while
+ using the current java compiler to build things.
+
+ This requires a custom version of the google play API library.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 93401542ab1bf53c5b7b2a2cad5da97e44d7244e
+Author: Bdale Garbee <bdale@gag.com>
+Date: Fri Aug 2 14:20:39 2019 -0600
+
+ ao-bringup: add a turnon_telefireeight script
+
+commit 318b81d59e6f34a92a7a78c0896aa331bc14d0a1
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Jul 17 11:40:06 2019 -0700
+
+ Use discovered java path for compiler and jni include files
+
+ Instead of using the discovered java bits just for jni.h, also use
+ javac from that directory. Add JAVA_VERSION param to set language
+ version for newer compilers.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 784ccd37d051e8b88ef1b150ccb4e89103675b3e
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Jul 17 11:38:43 2019 -0700
+
+ altoslib: Stop using deprecated Java functionality
+
+ new Double(x) -> Double.valueOf(x)
+ c.newInstance() -> c.getDeclaredConstructor().newInstance()
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 25be2785cf34773bdcac5ec7b2a41769e352812a
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 12:08:33 2019 -0700
+
+ ao-tools/ao-eeprom: Add support for TeleFireTwo
+
+ Display converted pressure and thrust data along with raw thermistor
+ data.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8b2e457db8c4536440ecd7dc35d06f827fc008dc
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 11:12:49 2019 -0700
+
+ altos: Record all failed sensors and report status at power up
+
+ Use DATA bits to mark which sensors have failed, then report that in
+ beeps at startup time to help diagnose hardware failures while still
+ allowing the board to be used over USB.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c37cd66b7c11f904b528c5ff7e80e18c5e0d26e5
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 11:10:36 2019 -0700
+
+ altos/micropeak-v2.0: Reduce power usage
+
+ This gets power consumption down under 1mA on the pad. Not really low
+ enough to sell, but I think this is about as low as the chip will go.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 40624256be70088d7608742b71e1241d95a7fcdf
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 11:07:27 2019 -0700
+
+ altos/stmf0: Allow SPI to be powered down when idle if desired
+
+ Set SPI_1_POWER_MANAGE and/or SPI_2_POWER_MANAGE to have the spi
+ blocks powered down when not in use.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bdcb3653bd9fb97f98773ac3bc1f87a6f52b1121
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 11:04:16 2019 -0700
+
+ altos/stmf0: Add 'ao_serial_shutdown'
+
+ This powers down the UART logic on request.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 009d56b4f03c1ba3c9a36bdb54c772ad21844057
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 11:02:56 2019 -0700
+
+ altos/stmf0: Leave power interface disabled until needed
+
+ We only need the power interface when placing the chip in the lowest
+ power state, so don't power up the power interface clock at startup,
+ instead wait until later.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e879d739c394602043e8ed512ad1a433fbf96c1c
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 10:23:54 2019 -0700
+
+ icon: Add altosdroid-specific icon
+
+ Google style guides have no drop shadows anymore, so create an icon
+ for the play store without one.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 9abacdaacf5ad1211da4fc72f5320ba9c43ff509
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 10:22:02 2019 -0700
+
+ altosuilib: Don't crash when flashing an unknown device
+
+ An unknown device will not have a config; check for that before
+ showing radio calibration dialogs.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a0a109d8c82e7f362253a0f1e52d14843ddec996
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 09:57:24 2019 -0700
+
+ ao-tools/ao-eeprom: Add altitude data for baro values
+
+ Displays altitude along with pressure and temp for baro sensor data.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0a60b7addddc302c66556c0f25ba1e71d14cf53d
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jul 16 09:56:39 2019 -0700
+
+ ao-tools/lib: Add atmosphere model
+
+ Converts between pressure and altitude
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fa214ca689449af3a241750e6c759dd3f2d52327
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jul 15 13:28:11 2019 -0700
+
+ ao-tools/ao-telem: Fix man page and usage to match code
+
+ ao-telem just parses .telem files.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 245a49a85dd7b6a7cb9ec36ad02f6bb66e42f4e2
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jul 15 13:26:30 2019 -0700
+
+ altos: Allow ms5607 driver to either set ao_sensor_errors or panic
+
+ Products that want to remain usable (over USB) after a sensor failure
+ don't want to panic when the ms5607 fails, but products with limited
+ ROM space don't want to have extra code to check for the sensor
+ failure and panic. Change the MS5607 driver to allow either option,
+ and then make the micropeak based devices use it.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 98f7c1c116aab672a29db1f81213cabe2d72ae16
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jul 15 13:22:15 2019 -0700
+
+ ao-tools: Change ao-eeprom into eeprom analysis tool
+
+ ao-eeprom used to be a TeleMetrum v0.2 specific tool for fetching
+ eeprom contents from that device. ao-dumpflash handles that case now.
+
+ ao-eeprom now parses .eeprom files and displays their contents.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e3eb285ff6be17afe592dca4a2fb5526c0626283
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 23:18:19 2019 -0700
+
+ altos/micropeak-v2: Update .gitignore
+
+ Ignore built stuff
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 06be34ea0750743b85823b873041188dac7b06d9
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 23:17:10 2019 -0700
+
+ altos/micropeak-v2: Correct AO_LOG_ID value
+
+ Typo wasn't caught by the compiler (thanks!)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c4b8aff07d5366cef2c7209729f6cd22fa67de0c
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 23:16:12 2019 -0700
+
+ altos/micropeak-v2: Erase log space at end of BOOST_DELAY
+
+ We have to erase the log before the flight starts, so this seems like
+ the latest possible moment.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 835faccc2c1141f7cd8ff93629d583fcaf785e48
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 23:14:54 2019 -0700
+
+ altos: Don't dump MS5607 eeprom in 'B' command
+
+ MicroPeak v2 now has config stuff where these values get shown
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bcf609837eefd431415c979942a31abda1227eb9
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 23:14:05 2019 -0700
+
+ altoslib: Add support for MicroPeak v2 eeprom format
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ee7a54b3215ffa1eb38f16a151c0740b14b60857
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 14:50:53 2019 -0700
+
+ altos/micropeak-v2.0: expose log and config commands over USB
+
+ This lets AltosUI handle the eeprom data
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6529fd623f0e4b921aea1110c723d7dc03954def
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 14:50:18 2019 -0700
+
+ altosui/telegps: Display error message when attempting to graph unknown files
+
+ Instead of presenting an empty graph window.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bd351b9e3b1ba21851b2c87f5202ac3bf5c479c0
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 14:25:09 2019 -0700
+
+ altoslib: Always create an ordered record set for eeprom files
+
+ If we can't parse the format, just leave it empty. This makes code
+ handling arbitrary records much easier as it doesn't have to check for
+ the ordered set existing.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4d4f018f22a0a9814e675a232b1c4239572bdd9a
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 13:02:51 2019 -0700
+
+ altos/micropeak-v2.0: Go into standby mode after landing
+
+ This is the lowest power state we can reach, and consumes about 15µA
+ or less.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2ef794e60b4f6a6e9cb5e9a14ef732f7d6d36b3d
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 13:02:12 2019 -0700
+
+ altos/micropeak-v2.0: Fix LED blinking sequence at power-on
+
+ 'pips' happens between altitude report and data dump.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8ec178bbc3babb072b8d53975632cf6294626e98
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 18 00:11:49 2019 -0700
+
+ altos/micropeak-v2.0: Wait for the power supply to stabilize before measuring
+
+ If we don't wait before measuring the battery, it will often read
+ under 3.2V right at boot time, which puts MicroPeak in flight mode
+ instead of USB mode.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 77df3f636ef8bf461800f5e08c28c09bfb69c48b
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 17 23:44:50 2019 -0700
+
+ altos/micropeak-v2.0: Don't run flight code when plugged in
+
+ No sense running the flight code when there's a USB cable attached.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ff7fa802f632700f73418246f1be5017ac0a09b4
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 17 23:43:02 2019 -0700
+
+ altos: Support ao_ms5607_dump when no ms5607 task
+
+ MicroPeak v2.0 has tasking support, but doesn't have a separate ms5607
+ task. That means the device isn't getting initialized when not running
+ the flight code, so in cmd mode we need to make sure it's initialized,
+ and we also need to actually fetch a value to display.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7c5ba25e61f98fd4537062dce52ab22d1445fa24
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 17 23:41:51 2019 -0700
+
+ doc: Say 'thousands of feet' instead of '3000-4000 feet'
+
+ No reason to try and be precise here.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4be194a350987cff5b459ebaa751347b216fde05
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 17 14:49:36 2019 -0700
+
+ altosui: Ship EasyMini v2.0 firwmare
+
+ Left this out in the last release...
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0a466e9869633c6ce7e43ff24ba2afff938461dd
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 17 14:47:56 2019 -0700
+
+ doc: Describe what sunlight does to MicroPeak and how to protect it
+
+ Show flight data from micropeak in sunlight, a picture of foam
+ installed on micropeak and the resulting data.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fa8e0fb8b75a808e029b090747fb60b35debb44a
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Jun 5 10:46:57 2019 -0600
+
+ add an explicit reference to Poron open-cell foam in Appendix A
+
+commit a6e8b739c47c50fa472e3f2a41cf13abb8d82c07
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri May 3 21:51:28 2019 -0700
+
+ altos: Directly compute radio tuning values from frequency
+
+ The 8051 compiler doesn't support 64-bit ints, so the old
+ code used an iterative method in 32-bit values. That could take
+ a long time when the frequency was mis-entered in Hz or MHz instead of
+ kHz.
+
+ This direct-computation uses 64-bit ints, but takes a fixed amount of
+ time for any inputs.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1d3a8443d8de832b8e76a005e56ac5ff09b71849
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Apr 23 06:45:54 2019 -0700
+
+ Add TeleStatic-v3.0 makefiles
+
+commit 0800970a4c9c6ed38bb76bfed6374093ca16b459
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Apr 21 18:30:43 2019 -0700
+
+ altos: Add preliminary TeleStatic v3.0 code
+
+ This adds the pin definitions and all of the code except for the
+ ads131a04 driver.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6a29b84cffcd31b2a74dd14a18aa4790eb4f14f9
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Apr 21 18:19:59 2019 -0700
+
+ altos/telefireone-v2.0: Include MAX6691 data in ring
+
+ Define HAS_MAX6691 which tells the data code to pull the MAX6691 data
+ into the data ring for logging etc.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 83823e4ee901edb893db68e36deb2b92ffec3958
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Apr 21 18:18:55 2019 -0700
+
+ altos: Change MAX6691 driver to run its own thread
+
+ This just captures temp data continuously; it takes 100ms to get the
+ temp data from the sensor, so the maximum rate is around 10 samples/sec.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 188f9efadd480de872f86a8eb741e8738db84c6b
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Apr 21 18:14:05 2019 -0700
+
+ altos: Add MAX6691 and ADS131A0X data to ring if present
+
+ Add these two devices as potential data sources to be added into the
+ ring if available.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2c19d410f9d6ff1075ea2de0c0ad7b6a84e1e378
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Apr 21 16:53:51 2019 -0700
+
+ altos/telefireone-v2.0: Definitions needed for MAX6691 driver
+
+ Fix the DMA channel definition (STM starts values at 1 for unknown reasons).
+ Add definition of the power enable bit for the timer.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5d3436ed8551537287dc6cf418f93b0989e1aee8
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Apr 21 16:49:19 2019 -0700
+
+ altos: get ao_max6691 driver working
+
+ The driver uses a timer connected to a DMA engine to measure pulse
+ widths from the chip. We get 11 pulses for 4 channels; the first pulse
+ is caused by the timer starting up, the next two are the marker pulse
+ and then 8 more indicating the end of the high and low periods for
+ each channel.
+
+ The driver API returns the 8 pulse widths; the caller is expected to
+ know what to do with those values as using them requires knowing the
+ value of the configuration resistor and the characteristics of the
+ thermistors.
+
+ The test code assumes a 1k configuration resistor, using that it computes
+ the resistance of the four thermistors.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 49ce3e9a2eb4e1918773b80c355d720a3dadc7e0
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Apr 11 23:54:37 2019 -0700
+
+ altos: Work on MAX6691 driver
+
+commit 0e8970c7f4eb7e8dd4ef325e4db4fe7412d0ed78
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Apr 21 12:55:20 2019 -0700
+
+ altos/lambdakey-v1.0: Fix obvious build errors
+
+ The code is too large to run on this device at this point, but at least
+ it doesn't fail to compile?
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8d77d5032781c5ef0dbb19de07ea97389b809f08
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Apr 18 19:48:00 2019 -0700
+
+ altoslib: Correct monitor idle IMU data for EasyMega v2
+
+ The IMU on EasyMega v2 is rotated from the other devices using this sensor.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6dea82844075348049ce5ff9bb8670ba8efc6668
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Apr 18 19:46:24 2019 -0700
+
+ altoslib: Fetch correct mag along data for EasyMega v2
+
+ Was using the wrong axis (y) instead of the correct one (x)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit df08028ff5dd892dafa667fde1fbf9de43f82fea
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Apr 18 14:42:15 2019 -0700
+
+ altos: Use ao_data_accel_invert when changing orientation value
+
+ Instead of using AO_ACCEL_INVERT, use the macro which flips the values
+ around. This fixes a bug with ADXL375 flight computers (EasyMega v2.0) where the
+ accel cal values would be scrambled when changing orientation.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 774001a9426493fd5c0d5a237da6cb903b1259a8
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Apr 18 14:32:48 2019 -0700
+
+ doc: Make sure all 'code' examples are in DejaVu Sans Mono
+
+ We were inheriting the default value for this setting, which was Courier
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b4ee716c0026cf997cde36ef00720d63a4c62c0c
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Mar 28 22:29:21 2019 -0700
+
+ doc: Document LEDs on TeleGPS devices
+
+ V1 has just the battery charger. V2 adds the GPS lock indicator.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 226f422b1fe5ccdf0bb3c07fa4983ec1615ce066
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Mar 18 17:21:57 2019 -0700
+
+ altos/stm32f4-disco: Remove scheme
+
+ This demo doesn't need a lisp interpreter
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 96c446b4dba6814d61317efb4d2dc99a3ca29e0c
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Mar 18 17:20:52 2019 -0700
+
+ altos/stm32f4: Working on USB
+
+ Reset now works, still no packets
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e38e1a2f735a1bb4aebf0817cdd99a05567c6340
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Mar 18 17:20:14 2019 -0700
+
+ altos/stm32f4: Wrong value for CK48MSEL_PLL_Q
+
+ This meant that the USB clock wasn't actually getting started...
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 65be5d1e07ff4ae619233f3b541b9599c44490ab
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Mar 18 17:17:21 2019 -0700
+
+ altos/stm32f4: Need to read-back register after clock enable
+
+ This was reported as necessary; I have no idea, but it's not
+ expensive, so why not...
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit efc2c093819b3ec2e5743126efb76d3a9c0ad231
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Mar 18 17:16:16 2019 -0700
+
+ altos/stm32f4: Add -mfloat-abi=hard compile option
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a2df970fca0e719e4b32e1642803590ff7bbd1ee
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Mar 18 17:15:16 2019 -0700
+
+ altos: ARM ABI requires 8-byte aligned stack
+
+ This makes doubles on the stack (as for var-args functions) work
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b7de266431ee7bf05ba68ccae3e43a0468045860
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Mar 12 12:58:20 2019 +0100
+
+ altos/drivers/ao_led.c: Declare LED port as void * to allow any SoC to use this code
+
+ The generic LED code needs a generic type for the GPIO port.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3a01a7e36dd475adf96468f42c95aa352b5fdf11
+Merge: 338372b9 6b0754ce
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Mar 5 18:31:37 2019 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit 6b0754cee625c6e2c19dc70fb5be6cd2f0125d47
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Mar 5 17:25:44 2019 -0800
+
+ doc: A few minor edits to telelaunch docs
+
+ 3 → three
+ less → fewer
+ transreflexive -> reflective
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 338372b97d441c30d2a23df540163a66a7f8d8c0
+Merge: 8d0df64b cd920a0e
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Feb 25 18:30:08 2019 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit cd920a0e5321166ef8b1d6afc3d63fc5de998a93
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 25 16:42:25 2019 -0700
+
+ altos: add ao_time_ns API
+
+ This provides nano-second resolution times by reading the systick
+ value (which runs at 250ns ticks on stm).
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0448b9b638f8599633227a639ef9d8572780bbd9
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 25 16:41:45 2019 -0700
+
+ altos: Change default time type to 32-bits
+
+ Offers additional range for internal use without increasing cost on
+ 32-bit platforms.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6fec7b5affd223c18bad78377d7655af958dffc2
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 25 16:40:16 2019 -0700
+
+ altos: Fix several mis-specified time types
+
+ Make sure AO_TICK_TYPE is used "everywhere", instead of uint16_t or other.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8d0df64bbc5ed31188b4b4bea0be52a52dbece3b
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Feb 24 15:10:25 2019 -0700
+
+ altos: ads124s0x successfully reading data
+
+commit 14fe18559d2eb7e568f07fcbaec89b6ef55fae24
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Feb 24 11:51:58 2019 -0700
+
+ altos: snapshot - working on ads124x0x driver
+
+commit 2f87e182d9f0b3c2856f62149371ad70b16148cf
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Feb 24 10:49:47 2019 -0700
+
+ altos: ADS124S0X driver compiles now
+
+commit 69bdb309f46a28803e93b08921720805b28b18a2
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Feb 24 10:28:15 2019 -0700
+
+ altos: fix ads124s0x data structure
+
+commit 8cc418ed3b0df0e465f0af27c2255cb97294e6ce
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Feb 24 10:25:31 2019 -0700
+
+ altos: first cut at ADS124S0X driver interrupt handling
+
+commit 654a23168f59d04d7e9cad657bebf8ecfdd8e41e
+Merge: d0f66918 655c5d2c
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Feb 21 21:57:26 2019 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit d0f6691804ee8de633601483354c93f1c2d75219
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Feb 21 21:57:08 2019 -0700
+
+ doc: actually add the telelaunch files
+
+commit 655c5d2c1124182ba336db368474cf4de0b9ce9d
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 21 19:28:14 2019 -0800
+
+ altos: Allow applications to override newlib printf selection
+
+ Re-defining NEWLIB_PRINTF_CFLAGS will allow applications to select
+ printf with floating point support if desired.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3310b22e28d953a6569cd50e83f91c25577424a5
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Feb 21 19:26:41 2019 -0800
+
+ altos: Fix ISR declarations to make them non-weak
+
+ In my zeal to eliminate warnings, I added declarations of all ISR
+ functions to a shared header file. However, I managed to include the
+ 'weak' declaration, which meant that the intended ISR functions were
+ as weak as the 'default' ISR functions. This left all interrupts
+ non-functional, which doesn't make for a happy program.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit eaf2ee0f498b519d64e1664a2b8c66c52ac1497c
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:43:50 2019 -0800
+
+ altos/telefireone-v2.0: Remove build of ao_product.h from Makefile
+
+ This is built in common code now.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c411c7ec71be0263a958c0803772cd6068e6bdad
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Feb 21 17:14:24 2019 -0700
+
+ doc: new TeleLaunch system manual
+
+commit 5c772d58ba83e147f0a404261a34c39183f2aac3
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Feb 18 17:39:34 2019 -0700
+
+ altos: first cut of code for telefireone-v2.0
+
+commit d31fda73fef37cf6a9e449c99f3197b713b93acb
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:26:39 2019 -0800
+
+ altos: Build telefireone-v1.0 by default
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6aeb000899ad7f22e92b487b5891664554bc4d33
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:26:08 2019 -0800
+
+ altos/telefireone-v1.0: Track ao_led_init API change
+
+ No longer takes a parameter.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2e468bfbf9f430b6a3970283d818ea4405ccfc5b
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:25:38 2019 -0800
+
+ altos/telefireone-v1.0: Set various ADC values
+
+ Reference voltage and divider resistor values.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4b41b14ea46ff6954895824a60637c0eb4353b17
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:25:06 2019 -0800
+
+ altos/telefireone-v1.0: Set AO_LOG_FORMAT
+
+ Use AO_LOG_FORMAT_TELFIRETWO for now; perhaps we'll have a new format
+ at some point.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 58f77ec66f5e40095917905578e36566b7e3401e
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:24:21 2019 -0800
+
+ altos/telefireone-v1.0: Turn off USE_INTERNAL_FLASH
+
+ This is for TeleMini v1.0 which stored log data to the program flash.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 9ea50f00039c812ea6a4a4235d78c140a0252662
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:23:13 2019 -0800
+
+ altos/telefireone-v1.0: Clean up Makefile
+
+ Follow other projects and remove common bits which are now in
+ Makefile.defs
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d19f1888d736943e8b51aeb56ec7097e11a505fc
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:22:07 2019 -0800
+
+ altos/telefireone-v1.0: Doesn't have a beeper
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f9f1776f61cf365e3c8862f9f93cd2773391da16
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 16:20:14 2019 -0800
+
+ altos: Remove AO_LOG_STATE from ao_log_telefiretwo
+
+ Telefiretwo never changes flight state, so these packets weren't going
+ to be written.
+
+ Also stop passing &log to ao_log_firetwo -- it always got the global
+ anyways, just use it directly.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7a89aa1ea7e1b02b5cd310986adf4239ec0ce91d
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 12:59:05 2019 -0800
+
+ altos: Move common build definitions to src/Makefile.defs
+
+ This cleans up the build process for all architectures, providing a
+ common place to specify vpath, cflags and build rules for various
+ common files.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 889518aeee080b0f8bb954db86d08105898d8161
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 11:25:21 2019 -0800
+
+ altos/attiny: Mark 'mode' param to ao_exti_setup_port as used
+
+ Retain API.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a12dc56db6d5245ee8ac594337576dd85791a984
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 10:42:23 2019 -0800
+
+ altos: Add -Wshadow to CFLAGS
+
+ And fix up the related messages.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fda36e57205138f6c180a18b54956ea1682a5293
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 10:41:31 2019 -0800
+
+ altos/stm-demo: Make this build again after various API and CFLAGS changes
+
+ Deal with LED API change. Remove unused functions.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 85104dbe9684af579c9255553b609fd28f8ee276
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 10:40:06 2019 -0800
+
+ ao-tools/ao-dump-up: Document --wait flag
+
+ --wait means to poll for a µPusb device instead of bailing when none
+ exists at startup. Quite useful for testing a batch of new device.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b6021e8dd866d6db54d28c79f0572aadd1861a5f
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 10:39:11 2019 -0800
+
+ ao-bringup: chaosread is no longer part of altos
+
+ this has been moved to a separate project.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a43bc96ad4a524480a2d47500fb0cfaeeba8ad3d
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 18 10:38:21 2019 -0800
+
+ stm: Expose LCD font API in ao_lcd_font.h
+
+ That required renaming the existing LCD font defintions from
+ ao_lcd_font.h to ao_lcd_font_bits.h.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ebb8ab6a2f5f1245098ad68d0cd007d3f115a24d
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:39:34 2019 -0800
+
+ altos: Add a pile more compiler warnings
+
+ Adds:
+ -Wpointer-arith
+ -Wstrict-prototypes
+ -Wmissing-prototypes
+ -Wmissing-declarations
+ -Wnested-externs
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d6c3c3618a708d2a1a7948454710e6ae21c2a426
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:38:23 2019 -0800
+
+ altos: Declare task stack as union of uint8_t and uint32_t
+
+ Support -Wcast-align and -Wpointer-arith while still allowing
+ architectures to pick whether they want an 8-bit or 32-bit stack.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 63a44b9c169d042fb1a3997620477e7f00bb0918
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:34:21 2019 -0800
+
+ altos: Remove unused ao_adc_get from ao_adc_stm.c
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f26197f0eec650330b476514c47978b4ba087719
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:33:32 2019 -0800
+
+ altos: Stop doing pointer arith on void *
+
+ Switch to uint8_t * instead.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 54dd2a6e3a05b940d9daebb3d73f6876c182b3e7
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:32:24 2019 -0800
+
+ altos: Add 'void' to function declarations with no params.
+
+ Support -Wstrict-prototypes
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 873f511173c637016b5e173813bd03c1725797bb
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:28:02 2019 -0800
+
+ altos: Declare all public functions in header files
+
+ Including interrupt vectors to catch mis-spellings.
+ Working toward supporting -Wmissing-prototypes
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c11427819ca24bb77523496309b5b6f699d126c5
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:24:37 2019 -0800
+
+ altos: Mark local functions 'static'
+
+ Working towards supporting -Wmissing-prototypes
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 119a829e58aff5dd7801fe7ef8cae886bf31fec1
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:35:02 2019 -0800
+
+ altos/stm: Note that ao_i2c_recv_dma_isr isn't actually used
+
+ This function resets the i2c transceiver after DMA completes, but it
+ hasn't ever been hooked up. Some testing would be a good idea. For
+ now, just add a comment and mark the function as referenced to avoid a
+ compiler warning.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit acf032eb39504657e9289ca54844967b9c3bed76
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Feb 4 22:42:05 2019 -0800
+
+ altos: Fix spelling of stm_dma_ch4_5_6_isr
+
+ This spellingn error would have caused all DMA to these channels to fail.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d7f8c9262f7979ddcc93cb64b913e392c18ef674
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Feb 17 17:35:25 2019 -0700
+
+ altos: ADS124S0X driver compiles with initialization code maybe completed
+
+commit c29f65a5696df66efb7e84e3ae8a3ea4b1f1494c
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Feb 17 14:38:53 2019 -0700
+
+ altos: add initial support for TeleFireOne v2.0
+
+commit 630f457666b48321be0a5b6fbf391efef1fa3eb4
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Feb 3 12:48:45 2019 -0800
+
+ Use strip-nondeterminism to fix JAR timestamps
+
+ .jar files are just zip files, and contain dates. These will cause the
+ build to be non-reproducible. Use strip-nondeterminism to smash all of
+ these back to a fixed value.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 145e5a1ac557c4990e74fb64b005fc68d6941bdc
+Merge: e2c9ef80 db730875
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Jan 28 13:46:59 2019 -0700
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit e2c9ef801abacd2533d9b4321c24a490d4556134
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Jan 28 13:45:31 2019 -0700
+
+ Makefiles, too
+
+commit db7308750b3478ec3d2332e81db9957a9d4f2cfc
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jan 28 11:35:32 2019 -0800
+
+ altos/telefireeight-v2.0: Add flash loader Makefile
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e40407467f28ab44b9f7c7d51a65a51f802410d5
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jan 28 11:33:19 2019 -0800
+
+ altos: Delete unused config bits for telefireeight-v2.0. Add Makefile
+
+ Clean up the config and set the copyright year.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 38dc7545a98a851af447ad3d69fa5bc85583fed9
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Jan 27 19:20:02 2019 -0700
+
+ altos: add telefireeight-v2.0 to src/Makefile and to Releasing
+
+commit f29b55691c9f160898b49bf15f46a88ae00b115f
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Jan 27 19:16:41 2019 -0700
+
+ altos: add support for telefireeight-v2.0
+
+commit 37f4a66e47370e0e5ef42b0d70cda060fa2baa64
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Jan 9 15:42:42 2019 -0700
+
+ doc: add force-bootloader instructions for TeleGPS v1 and v2
+
+commit 3703aef1b8b043697e8b99df24b987ba696909bc
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jan 7 17:15:41 2019 -0800
+
+ doc: Fix typo in TeleBT v3 flash-force instructions
+
+ taht → that
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 38630c65460b5e873a0df0fef937d498a37ea329
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jan 7 17:12:56 2019 -0800
+
+ Remove ao-chaosread
+
+ This program is now provided by the independent chaosread program.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 31f9ed231e63b214b405a141cabce3eb758e82e6
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Jan 5 18:02:34 2019 -0700
+
+ doc: add flash-force instructions for TeleBT v3.0
+
+commit 72bcff4c1af10571314e5cbbe29f073de818088e
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 3 11:59:02 2019 -0800
+
+ ao-tools/ao-telem: Print out 'log_max' value. Clean up compiler warnings.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 14900d539c9d379a39ec157bb7e1914aad8fde3c
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 3 11:57:42 2019 -0800
+
+ ao-tools/ao-cal-accel: Initialize byte count var 'l'
+
+ When left uninitialized, the program would randomly segfault at startup.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 96be286b3a9daa9bdb7872118be0118872d483f8
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 3 11:55:38 2019 -0800
+
+ ao-tools/ao-load: Return status from 'rewrite'
+
+ Was just falling off the end of this function, returning a random value.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6f729ff46b2f4531db68f0af85e7e9fe0f6d1969
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 3 11:41:49 2019 -0800
+
+ ao-tools: Fix warnings in ao-tools
+
+ None of these appear likely to have caused actual problems.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f14c799ae7ff3be56c28f5694f04c03daff7708e
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jan 3 11:40:32 2019 -0800
+
+ ao-tools: Add lots of compiler warning flags to ao-tools build
+
+ This catches some uninitialized variable errors which cause
+ ao-cal-accel to crash (fixes coming next)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit adf4bec88df1822031e1a8b00422de8b8b0c0cd4
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Jan 2 23:51:58 2019 -0800
+
+ doc: Update all docs to 1.9. Note this in doc/RELNOTES
+
+ Missed a bunch of 1.8.7 numbers due to a missing step in the release process
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a3177edd807b12a58d684ece60b0f3329e742af6
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Jan 3 00:49:22 2019 -0700
+
+ updates to Releasing based on 1.9 release process learnings
+
+commit 5b4da841459a650e641924aab132f566c6259c4d
+Merge: 95ffec07 ecf40a3a
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Jan 2 23:03:41 2019 -0700
+
+ Merge branch 'master' into branch-1.9
+
+commit ecf40a3a190fb2f7d7d2654c1e87daddf0362b0c
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Jan 2 22:02:42 2019 -0800
+
+ doc: Skip .pdf generation when asciidoctor-pdf is missing
+
+ Not available in debian unstable yet
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 95ffec073b0758801df04a77eca0bd2bc6e57e35
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Jan 2 22:19:36 2019 -0700
+
+ changelog for 1.9 release
+
+commit 4e9e0bf99d6b71086110038fa1e3231d00bb2496
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Dec 31 15:20:57 2018 -0800
+
+ Update to version 1.9
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f62ac01979a403f6a05f119201a62a8ffc217c73
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Dec 31 15:20:23 2018 -0800
+
+ Change Releasing to reflect asciidoctor switch
+
+ Don't need to hack .xml files anymore (yay!)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bed019b64d9e37f276ad5aa2dabb7681aae122ec
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Dec 31 15:17:01 2018 -0800
+
+ doc: Add 1.9 release notes
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f9fdbfade5e2d203d2ca5378e4f2a65beae4a19f
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Dec 31 15:17:42 2018 -0800
+
+ doc: Set doc version to 1.9
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ec8df548e3f6fd5d809238e2e60a0844775f551a
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Dec 31 15:17:20 2018 -0800
+
+ doc: Add EasyMega v2.0 specs
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 58fb7e53989f67fe8d793d7b3ddad8e41682cfbe
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Dec 31 15:18:08 2018 -0800
+
+ doc: Update doc/RELNOTES to adapt to asciidoctor change
+
+ Moving to asciidoctor means changing our doc release process
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bb3f961022032390bfac6104ea4136354df67689
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Dec 30 14:28:07 2018 -0800
+
+ Add shipping products to fat_altos target, note that in Releasing
+
+ These bits are used to build alpha/beta releases, so they should
+ support all existing products.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 60b46436f9f642d43be4e00df08eccadb57214e8
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Dec 31 12:37:45 2018 -0700
+
+ ao-bringup: get turnon_easymega working for v2.0
+
+commit 9791ebb256c2892663c072f7989e4b9bd34818a1
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Dec 30 14:15:51 2018 -0800
+
+ altoslib: Remove spurious debug printf in AltosCalData
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0d472ab07224a21abfa83da8336439d7844f9aa8
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Dec 30 14:11:03 2018 -0800
+
+ altos: Don't validate ADXL375 self test for maximum value
+
+ The data sheet says this is unreliable, and that we should be using an
+ FFT anyways.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4fb00afc9018c6179c4aff897fcbb330588d02a2
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Dec 30 13:42:50 2018 -0800
+
+ altos: Make HAS_ACCEL_DEBUG build again
+
+ Need to not use ao_error_h_sq_avg without HAS_ACCEL
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 84c04a114898d97a13f61e1006949dc3926eeba1
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Dec 30 15:16:29 2018 -0700
+
+ update easymega turn-on script for v2.0
+
+commit e9a3268285e97b7316c3321892e77814703ff71d
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Nov 1 19:40:31 2018 -0700
+
+ doc: Use icons for admonitions
+
+ This replaces the text 'WARNING' or 'NOTE' with a suitable icon instead.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d859a7f65baf6c5c170f14fb2d9401b5c607a254
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Oct 25 17:01:38 2018 -0700
+
+ doc: Remove asciidoc related files
+
+ These all helped asciidoc generate documentation
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 41fed74c4cf139de6bf8f1879d370977785ad1f8
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Oct 25 16:56:24 2018 -0700
+
+ Remove cc1111 products from 'fat_altos' list, which is used for keithp-fat
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6d80b89c0bd82133dd5c93df8604f562ac49c19a
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Oct 25 16:50:17 2018 -0700
+
+ doc: Switch to asciidoctor to format docs
+
+ asciidoc and a2x are no longer actively maintained and Debian policy
+ encourages people to move away from them to asciidoctor.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cf3e524e50a6fae2862efb404c9918b74438e9c9
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 23 16:07:09 2018 -0700
+
+ Generate LED icons on the fly. Include SVG versions.
+
+ This builds the required LED images from source code.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e9915aad4fe97cd253b88805646085c64181baef
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Oct 22 16:48:56 2018 -0700
+
+ Don't force CFLAGS from top level
+
+ Let the system defaults control this value.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cf7b2e065d844d290ee43449ae37162839220158
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Oct 22 16:48:04 2018 -0700
+
+ ao-tools: Spelling fixes in a couple of man pages
+
+ ao-dbg.1 and ao-eeprom.1
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1812adbd61400af19293bf775e544baf661ec224
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Oct 22 16:47:20 2018 -0700
+
+ Add keywords to .desktop files
+
+ Makes applications easier to find with search
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 48e221cca00c9f925ff57588dd782842705f7a23
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 20 17:29:36 2018 -0700
+
+ altoslib: When flashing hardware, pull USB data from device if needed
+
+ If we fail to extract USB vid/pid and product values from the device
+ ROM, use the data discovered over USB when the device was originally
+ discovered.
+
+ Also, use the USB product to select appropriate .ihx files instead of
+ only using the USB vid/pid. This will help people avoid using the
+ wrong file when reflashing devices.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 345e3c37a1cf619392b54589bb91b4caf7844810
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 20 17:26:53 2018 -0700
+
+ altos/easymega-v2.0: Handle different mpu9250 orientation
+
+ The mpu9250 on EasyMega v2.0 is rotated 90° compared with EasyMega v1
+ and TeleMega IMU devices.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8c92656576aff3ceab5bead3c835d96c36098fe7
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 20 17:24:41 2018 -0700
+
+ altoslib: Add support for EasyMega-v2
+
+ adxl375 instead of mma6555.
+ mpu9250 rotated 90° compared with other megas.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f13e294d4644096b0529383c1d60d5e4b7916d76
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 20 17:22:59 2018 -0700
+
+ altoslib: Add support for TeleGPS v2
+
+ The battery voltage ADC values are different from TeleGPS v1 (max 4095
+ instead of 32767).
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c01514fa1e0a2cea3955c71a833b4a21b3d33f24
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 20 07:34:57 2018 -0700
+
+ altos/adxl375: Clean up initialization, shortening self test period
+
+ Set the self test period to that suggested in the documentation.
+ Eliminate some debug variables.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0686a7b8aec524d81bda4c572549a3a068ce0eed
+Merge: 6aa451ce cc528f1f
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 20 01:18:12 2018 -0600
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit 6aa451ce81bfdfe679e3f9902043a5f0d235c745
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 20 01:17:39 2018 -0600
+
+ altoslib: fix computation of TeleGPS battery voltage
+
+commit cc528f1ff0271ec6488a1a7b91c731183502101e
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 19 13:20:31 2018 -0700
+
+ altosui: Add EasyMega v2.0 firmware to release
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1e4b8674d874a190eca1a98a397aaf0a9d15bda1
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 19 13:19:03 2018 -0700
+
+ altoslib: Add ADXL375 support and EasyMega v2.0 support
+
+ EasyMega v2.0 replaces the MMA655X with an ADXL375 part.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3fd320ea38f2945f5611a09a0e48d16db467d105
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 19 08:41:51 2018 -0700
+
+ altos: Add EasyMega v2.0 to default build
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f49763bf4a6cd8b2a47abfbec7ef3d8c8c029b8f
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 09:43:25 2018 -0700
+
+ altos/easymega-v2.0: Add adxl375, replace mpu6000 with 9250 [v2]
+
+ Should reflect current hardware design now.
+
+ v2:
+ Use SPI mode 3 for ADXL375
+ Invert ADXL375 values
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6fdc392ef1b624c06e26e7a053c3579435c455d5
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 09:46:01 2018 -0700
+
+ altos/easymega-v2.0: Change binary to easymega-v2.0 instead of easymega-v1.0
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 30e4e286eec31e69ad1e69a44cf00d4549a09f88
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 09:41:31 2018 -0700
+
+ altos: Add ADXL375 driver [v2]
+
+ Includes self-test code and multi-byte mode operation for reading
+ sample registers.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 33bb97b9637bdabe4360269889e20fcc50ef9886
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Oct 15 11:15:31 2018 -0700
+
+ altos/stm: Support SPI modes other than 0
+
+ ADXL375 requires SPI mode 3.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit dbc52686c6d9808275c35e0c9c987cbbd9f7859d
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 13:42:34 2018 -0700
+
+ altos/stm: Make beeper driver support all possible tim234 configs
+
+ And update all users to be explicit about the desired config.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 80affca535c5c43a5d9963dfafc74f9675c9b155
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 19 08:12:22 2018 -0700
+
+ altos: Create ao_data_fill shared function
+
+ This fills a data ring entry with all of the current sensor values
+ other than the ADC. It is used in all of the adc completion functions.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit facf790f469df374257440ba9482321cbab7cecb
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 13 10:17:47 2018 -0600
+
+ altos: remove usbtrng support (chaoskey prototypes)
+
+commit 59f66e3264a48d8586dcbd12f6f0fa91e2e1ecdc
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 13 10:12:39 2018 -0600
+
+ altos: remove telescience support
+
+commit 758c8c27ba1819b5d90fda9e9ba6d15f5e8598e0
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 13 10:02:13 2018 -0600
+
+ altos: remove teledongle-v1.8 support (what was that, anyway?!?)
+
+commit 3620f09329ccae817fe3ec2f9c2c588ebbfa149b
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 13 09:59:22 2018 -0600
+
+ altos: remove megadongle-v0.1 support, never went beyond prototype
+
+commit 2da09b9f5649786f202aa0f295ead728939eddae
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 13 09:57:44 2018 -0600
+
+ altos: remove telepyro-v0.1 support, which was never completed anyway
+
+commit 41ebb27230de6385a01c111c299bb22b1cb0badf
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 13 09:55:03 2018 -0600
+
+ altos: remove teleterra-v0.1, also an ancient cc1111 project
+
+commit 983c36782527078ce667feb9eccd1ed0b97fbc29
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 08:33:49 2018 -0700
+
+ altos/drivers: Use stdbool in ao_ms5607.c
+
+ We don't have TRUE and FALSE anymore (they were pdclib specific).
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 346fdfb469f7f3c1f87a39dee5bfb4568631c28b
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 08:27:41 2018 -0700
+
+ altos: Remove pdclib bits from Makefile
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cf21c87f9f3e1a75dba39ab41dfffb629586935d
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 08:27:17 2018 -0700
+
+ Remove .gitmodules
+
+ We no longer use submodules (yay!)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 815d537e0fa6503b2a83d92d94c734eaee15987b
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 08:26:02 2018 -0700
+
+ Bump version to 1.8.7.1
+
+ Tag development versions
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 408badbef80d7a3412b5ad92b269be19d0faaa09
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 12:48:25 2018 -0700
+
+ altos/stm32f4-disco: Start hooking up stm32f413 USB for the disco board
+
+ Non-working as yet.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 805d218ff50e6c38345c0d4e46f568009132633e
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 12:46:19 2018 -0700
+
+ altos/stm32f4: Add start of stm32f413 USB support
+
+ This code doesn't work yet.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 4a246b4cb5ee8e8894ea3492187a08e1e4f719bb
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 12:46:01 2018 -0700
+
+ altos/stm32f4: Add stm32f413 USART support
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 600689b39d9bc604b0a8b586c8a93a465a42fc3b
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 12:45:39 2018 -0700
+
+ altos/stm32f4: Add external interrupt bits
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 015d3055a52532070e96469907683c3aa3eda44e
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 12:44:58 2018 -0700
+
+ altos/stm32f4: Add more stm32f413 definitions and support code
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 44ae8b9317fa4aaccabbe9d07b5972f7dfd3baa2
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 18:53:15 2018 -0700
+
+ altos: Clean up AO_ROMCONFIG bits
+
+ Remove address parameter (doesn't work with gcc), create shared
+ ao_romconfig in kernel.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 32463323d888d2b36d4b993d82e2522e1b236299
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 18:51:59 2018 -0700
+
+ altos/stm32f4-disco: Hook up serial console. Add scheme
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bb9d3d3bb1ae6223a7b910bc49ea8af5544a64d7
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 18:50:45 2018 -0700
+
+ altos/stm32f4: Place ARM.exidx sections after .text
+
+ This makes the linker happy about not attempting to merge unordered
+ and ordered stuff (whatever that means...)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cd151a622537e1436362bd71229c6ce22a3957d0
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 18:50:15 2018 -0700
+
+ altos/stm32f4: Use full printf/scanf (including floats)
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0b5ac831d2e63a091833c702b07b0331fba32e72
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 18:49:22 2018 -0700
+
+ altos/stm32f4: Add usart driver for usart6
+
+ This is what the disco board hooks up.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 23075d174d2bff8ff3f3deef3c3d90b83da6bd2e
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 18:46:52 2018 -0700
+
+ altos/stm32f4: Align stack to 8 bytes
+
+ This makes sure that doubles are aligned properly when passed on the stack.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 71248c899676e0c2f3a478c63dec0d005b2458e6
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 12:03:27 2018 -0700
+
+ altos/stm32f4-disco: Add .gitignore
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2cdb1f30c49ba460b0850d23ba9c85e0336af290
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 11:57:50 2018 -0700
+
+ altos: Add generic LED driver.
+
+ This driver uses the generic GPIO functions and allows per-LED port
+ and pin configuration. It supports up to 32 LEDs.
+
+ Rename SoC-specific LED drivers.
+
+ Remove enabled parameter to ao_led_init
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cdaa0d7b272505c49017f409b7c0b8e3240608f0
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 10:40:24 2018 -0700
+
+ altos: Eliminate 'pin' field from GPIO functions
+
+ This was used with the 8051 bit-addressing mode to provide
+ single-instruction access to GPIO pins.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f7ca88282466c271bad5e25e804729580fe83c47
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 01:28:03 2018 -0700
+
+ altos/stm32f4: Fix clock configuration
+
+ Was running the PLL input too slow (it wants 2MHz).
+ Was configuring the PLL_P factor wrong (needs magic values, not P
+ value)
+
+ Set up clock debugging for PA8 and PC9 output. Enable on disco board
+ for debugging.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 621d1529d6bc07a3f4bd27fb2d02d5b3161a3a6a
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 00:08:17 2018 -0700
+
+ altos/stm32f4: Add STM32F413 disco board support
+
+ Discovery development board
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b7a21bf6a086748b4907c0577eaa114445995783
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 00:07:38 2018 -0700
+
+ altos/stm32f4: Start adding support for STM32F413
+
+ Enough to get clocks lit up at least.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f037d0091a4b31c631d64e71441953eb9b3b21ce
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 12:47:00 2018 -0700
+
+ altos: Remove 8051-ism from ao_usb.h
+
+ __at doesn't exist for non-8051
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b8e607960f2f399fd6ba92a8c97ab72e19812d3f
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 00:05:38 2018 -0700
+
+ altos: Delete random 8051 ISR declarations
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a76829a4a840261e33869c40b3366fff3b691069
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 15 22:44:17 2018 -0700
+
+ altos: Allow application-specific prompts for ao_cmd_readline
+
+ Lets other readline users specify alternate prompts.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 684741765117611b7d666efbdfafd87c6199752c
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 15 19:17:19 2018 -0700
+
+ altos: Use stdbool true/false instead of TRUE/FALSE
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c417ab1de2a083b5fcff2e081e4feb2a65887903
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 15 19:13:45 2018 -0700
+
+ altos: Make cmd number parsing functions return value
+
+ Don't use a global variable to hold the result.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c6e57291d91f1f6c4de5c54a5cfd3eef66d9f830
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 15 17:47:37 2018 -0700
+
+ altos: Remove 8051 address space specifiers
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6023ff81f1bbd240169b9548209133d3b02d475f
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 15 17:34:20 2018 -0700
+
+ altos: Remove *_TO_DATA macros
+
+ Now that we don't support 8051, we don't need these
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e2e2182a6ae6c8a7290fb5f7bbb7f8e0a863ba99
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 15 15:39:34 2018 -0700
+
+ Remove pdclib
+
+commit 7c04888cf9809e0c73f0813c74e8dd972facde3a
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 5 12:23:22 2018 +0800
+
+ altos: Switch to newlib-nano for libc on arm
+
+ Stop using pdclib
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 56629222711ba3ef7853405c9b07ad614fb29b95
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 5 12:17:19 2018 +0800
+
+ altos: Remove cc1111 products
+
+ We're not testing these anyways; building new firmware for them is not helpful.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 382b3ef62a09e580834b07faf9ed2d00e5ce1621
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 00:06:44 2018 -0700
+
+ altos: use %lu for APRS altitude in sprintf
+
+ It's a long.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 803c68d7933d03aaebda19786b63055d4a6d3d22
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 07:50:59 2018 -0700
+
+ altos/stm: Make flash loader work with either 8MHz or 16MHz xtal
+
+ Provide PLL definitions for both values.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e830d803d3e289f0f1a6d92ce208682af28d3f52
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 13 07:44:10 2018 -0700
+
+ altosdroid: Bump version to 18 for 1.8.7
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 393a5e929b530d9ee4f78cd01faa4dd90c95fe3a
+Author: Bdale Garbee <bdale@gag.com>
+Date: Fri Oct 12 23:32:57 2018 -0600
+
+ altos: first cut at easymega v2.0 support .. nothing working yet
+
+commit fe3ff829d4c2fde8d4e80f721204b18e7831bb97
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Oct 10 20:41:40 2018 -0600
+
+ doc: add bootloader force instructions for TeleBT v4.0
+
+commit 34b5144dbfd565ee2b9fb1e0dff388a49253f93b
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Oct 9 11:46:09 2018 -0600
+
+ update turnon_telebt to use new approach for saving cal value on TeleBT
+
+commit ba37db43741fde8a08080fa65f5bcf76b1f745ee
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Oct 8 21:41:30 2018 -0600
+
+ capture changes to Releasing discovered during 1.8.7 release
+
+commit e7136c6b413c8464d32cdc4afc28c93ba1f17a3b
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Oct 8 19:42:09 2018 -0700
+
+ altos/lpc: Make sure USB pull-up is held low at boot for 'a while'
+
+ Add a delay loop to make sure the host sees the pull-up low for long
+ enough.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6e785eea7b7a14ec8c1e69cad2c88836a9b1943e
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Oct 8 19:40:32 2018 -0700
+
+ ao-bringup: Use new ao-cal-freq options when flashing teledongle v3.0
+
+ Use --nosave and --output to get the value needed to reflash the device.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 88ae4c5ebd64215f05f5efc18f9660560b409ace
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Oct 8 16:27:33 2018 -0600
+
+ doc: correct specs for TeleMega v3.0, which still uses the MMA6555
+
+commit 24db798925e26a4c411afe88f7e4844d6554fe0c
+Merge: 6f25d235 03680c55
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Oct 8 16:07:32 2018 -0600
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit 6f25d2359151fb114e22bf8e3b15c007cfb464b5
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Oct 8 16:06:29 2018 -0600
+
+ add new script that uses openocd to reset an LPC target
+
+commit 03680c55ae8394056ed27839e64356d8df375537
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 23:31:53 2018 -0700
+
+ Set version to 1.8.7
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 625981b96e99a5dbec8180016d5e2c291378a21f
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 23:31:04 2018 -0700
+
+ doc: Note fixes for Mac OS X
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cd75ca767b616900d7df4596907f4f5b00517ad4
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 23:25:25 2018 -0700
+
+ Switch to universal JavaApplicationStub for Mac OS X
+
+ The binary JavaApplicationStub only supports Mac JRE 6, even if you
+ install a later JRE from Oracle it will still run our apps with the
+ Mac version.
+
+ This replacement JavaApplicationStub is a shell script which comes
+ from here:
+
+ https://github.com/tofi86/universalJavaApplicationStub
+
+ I've tested it with Oracle JRE 10 installed and AltosUI came up fine,
+ and has access to our devices and networking.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 746ad2c385046c77831b43291ef4335a11e5bfab
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 16:28:32 2018 -0600
+
+ altos-mapd: Add --max-zoom to limit tile loading. Set default to 15.
+
+ This ensures that we won't end up serving huge numbers of high
+ resolution images.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7f5cdd0aeb68104f474ad1736360df39dd174006
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 14:26:27 2018 -0700
+
+ doc: Note that 1.8.7 fixes map images
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2bcbd39a37cf1fa0002345d5c401869a387dc84f
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 14:11:03 2018 -0700
+
+ altosuilib: Leave some map debug code around for the future
+
+ Displays lat/lon on each map tile. Commented out for production use.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 444fdd96515cc7163c49942ac2435ace8e7bb5bf
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 14:06:51 2018 -0700
+
+ altoslib: Be less chatty about map loading
+
+ Only mention when a new tile is being fetched from the server.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 173e72429fb494ea3832e3e38ee90f165fbff4cf
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 14:49:48 2018 -0600
+
+ altoslib: NumberFormat can't be shared between parsers
+
+ AltosJson uses NumberFormat to ensure locale-independent parsing of
+ values. However, NumberFormat appears to have some internal state
+ which means that each thread needs to have an independent NumberFormat
+ object. Create one for each parser as needed.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1b53a54b032c21b6e8ffb085aa56b9ffdff53d7e
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 13:12:56 2018 -0700
+
+ altosui/altosdroid: Change message in forbidden map tiles
+
+ These are outside of *known* launch areas.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e7e1e805f1358052b33103a2ffdd4e9c435c8650
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 14:08:30 2018 -0600
+
+ altos-mapd: Check nearest portion of tile to launch site
+
+ We limit tile queries to those within 17km of a known launch
+ site. Change the check to look at the portion of the tile nearest each
+ launch site, instead of only checking the center location of the tile.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 581f700e08ec8a1c3bfc5a09e7186676c54a5460
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 10:32:48 2018 -0700
+
+ altos-map: Switch from json FD ops to json FILE ops
+
+ Older versions (in Debian stable) do not have the fd-based operations.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 6f911b92652de890ebff67b3b28f21a36f300ebf
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 10:03:31 2018 -0700
+
+ altos-mapd: Handle clients failing to send valid JSON
+
+ Just bail if the data we receive doesn't generate a json value.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit b631f88b0bf19c6740eb21b65bd4be7c25049773
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 10:02:26 2018 -0700
+
+ altosuilib: InputEvent.getModifiers is deprecated, use getModifiersEx
+
+ Some java change; seems like it's a no-op for us.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5c957107ee5917d865eb866319f86cf8c109f212
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 10:01:30 2018 -0700
+
+ altosui/altosdroid: Disable offline map type selections
+
+ Our server only supports hybrid maps for now. If that changes, we can
+ re-add this support easily enough.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e4f4183ce206d4cb7bbc89e1065eb34b05cf11c4
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 09:39:27 2018 -0700
+
+ altosuilib: Remove GrabNDrag.java
+
+ This isn't used anymore.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit af678be97e419a1167a0630f28bcaba82d67929b
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Oct 7 09:22:44 2018 -0700
+
+ map-server: Implement altos-map in C
+
+ This app is all about startup time, and java starts
+ slowly. Re-implement in C to improve server performance.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7b248524d4bd2c3ab64899b133230d131258396c
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 23:32:24 2018 -0700
+
+ altosdroid: Restore google maps key setting
+
+ Only for altosdroid, and use a key restricted to our app
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7eb475a9694327809b7ab5a9f419d00e0819a47d
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 23:25:50 2018 -0700
+
+ altosdroid: Set offline map scale to 1
+
+ Offline maps only supports scale 1 now.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 417ec9c2a42bbe74f3aba4d00b42eb14dd6eb079
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 23:22:26 2018 -0600
+
+ altos-mapd: Install systemd service file and defaults file
+
+ This lets the map service 'just work' if enabled.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 64d6689f97dfbed13533350dcb75a0a6a3d11c78
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 21:32:12 2018 -0700
+
+ altos-map: Support version query from application
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7c39a4509b0d4a428fcb83602a8dae1c158faf37
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 21:30:03 2018 -0700
+
+ altosuilib: Fix offline map messages to match new meanings
+
+ forbidden means outside of launch area.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a8f4af38d7abbb1da922b5e4d84af218475f1752
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 21:30:58 2018 -0700
+
+ altoslib: Retry map connections 10 times on network failure
+
+ This covers a host of problems between the application and google maps.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fab890328d4e1151932621a317226bc291b853da
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 21:30:03 2018 -0700
+
+ altosdroid: Fix offline map messages to match new meanings
+
+ forbidden means outside of launch area.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ff5faf1cc710b7e9299dcaec719bc2421f4ca5b4
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 20:21:07 2018 -0700
+
+ altoslib: Change map loading to lat=&lon= from center=
+
+ This is easier to parse.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 21c630af7181a03b44cfcfa1cc787212501785ec
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 20:20:33 2018 -0700
+
+ altoslib: Use https for launch-sites.txt
+
+ http causes a redirect, which Java doesn't handle
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a203aa6e3ed67337b752f939da956856e208c28b
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 22:28:36 2018 -0600
+
+ altos-mapd: Install altosmapd.jar file
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1b841e14d11b3a9e7a754730b1d87b30d22f3dd4
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 22:27:58 2018 -0600
+
+ altos-mapd: Make cache service listen queue longer
+
+ Just in case the service gets busy, make the listen queue longer.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 02adfb13297f7dffcd8edcdd3b8747cf52b2a70b
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 22:27:20 2018 -0600
+
+ altos-mapd: Clean up log messages
+
+ Generate a single log message per request with remote address,
+ parameters and result code.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 839e3a413a60c6a61851a94cc299de701ab5c277
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 22:26:46 2018 -0600
+
+ altos-mapd: remove debug printf
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 026c735393f6029d09011dba1d5c780322921921
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 22:25:48 2018 -0600
+
+ altos-map: Retry connection to cache service
+
+ Just in case the cache service gets busy, retry the connection instead
+ of immediately failing.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e7c0bcd945f8365e86e99b9d450f3a3389fa0e66
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 19:33:51 2018 -0700
+
+ altos-mapd: Add geo-fencing for map requests. Add port and key arguments
+
+ Map requests are now limited to a region within 17km of any registered
+ launch site.
+
+ The --port argument allows the listen port to be changed.
+
+ The --key argument provides the name of a file containing the Google
+ maps API key.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c7b1f3c6722ae59d09a888084075664446ff2768
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 19:29:01 2018 -0700
+
+ altoslib: Switch to maps.altusmetrum.org when no google map key is available
+
+ The map key is only usable from maps.altusmetrum.org at this point,
+ and that service will be proxying for everyone in the near future.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fe761eb413430c061b12f6ca8003665e56e20262
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 19:27:43 2018 -0700
+
+ altoslib: Allow launch site URL to be overridden at runtime
+
+ Expose a public variable, AltosLaunchSites.launch_sites_url, that will
+ be used in place of the environment variable or pre-defined value.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 073ebc77bbd813eb97c515ecf3c2d104d6157843
+Merge: fb167d9f 9e29ac8e
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 6 18:55:05 2018 -0600
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit fb167d9f589d3e42e0f99b9f454a51a31e09050a
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Oct 6 18:54:35 2018 -0600
+
+ altoslib: update launch-sites.txt location to new home at maps.altusmetrum.org
+
+commit 9e29ac8ed9a48fc4ac8e769eeb131dd7c58fedc4
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 17:17:20 2018 -0700
+
+ doc: Make use of 'faketime' configurable with configure.ac. Default to 'no'
+
+ This ensures that older a2x versions don't simply wedge while building
+ the docs.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cabfcb078950238cdaee4e6ec4702195feaabc7b
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 18:11:48 2018 -0600
+
+ altos-mapd: Use command line to pass map directory in
+
+ Don't bother with a default value, just require a command line param.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit e405ec771b812f0ff78abbe813c3a793ae129487
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 18:11:13 2018 -0600
+
+ altos-map: Install .jar file for altos-map
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a372152654613fd8479ed4687b987ae2a513adf6
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 18:10:57 2018 -0600
+
+ altos-map: Fix altos-map HTTP syntax
+
+ Add blank line between header and content.
+ Make error pages have actual HTML content.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3b817a2b854065af23c9ec8e849150e6930f51e9
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 16:04:39 2018 -0700
+
+ map-server: Add maps proxy server
+
+ This creates a map proxy server to handle the new Google Maps API requirements
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 5a95ed9c9419c15352b8dc1d895c9adce30f99f5
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Oct 6 12:00:45 2018 -0700
+
+ Add map-loading documentation
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cc70746e8efa6cadb23cbfcb11ddb51574c512a9
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 5 21:40:13 2018 -0700
+
+ doc: Use RELEASE_DATE to set PDF timestamps using faketime
+
+ This ensures that the generated PDF files do not depend on the time of
+ the build and only on the date of the release.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8e87b2626cdd81c128ac0cb5db03350aff67feac
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 5 19:36:20 2018 -0700
+
+ macosx: Ship install-macosx script with all apps.
+
+ This script copies all files to ~/Applications/AltOS, then it deletes
+ all xattrs on all files so that OS X will run the java programs.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit a477dcbafe942af8f53e57802e228d94b526e13e
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 5 18:22:59 2018 -0700
+
+ doc: Add check for new hardware in specs.inc
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bb740c830b58273ee72255320bcedb3b849c0e2c
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Oct 5 18:22:11 2018 -0700
+
+ doc: Update for 1.8.7
+
+ Release notes
+ Add HW specs for EasyMini v2.0 and TeleMega v3.0
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit aeb07f2b94b0121d4e5a6ce175ce4e013d6557cf
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Oct 4 23:10:59 2018 -0700
+
+ altos: Force telemetry rate to 38400 when ao_force_freq is set
+
+ ao_force_freq is used by TeleMini to set the radio to known
+ values. As TeleMini v3.0 also has configurable telemetry rates, this
+ value also needs to be set back to a known value.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 77c3878df78ae356c442999a99f1e1752e2cd06b
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Oct 4 23:03:12 2018 -0700
+
+ doc: Describe Packet Link mode in the initial usage section
+
+ It's not described in any detail elsewhere...
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 0f05859d9fdef5867df888d9a8b41602e3bff7f7
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Oct 4 22:58:38 2018 -0700
+
+ doc: Describe Packet Link usage and selecting RF param defaults for TeleMini
+
+ Packet Link mode is the only communication method available for
+ TeleMini and deserves some special mention in the docs.
+
+ TeleMini allows forcing of RF parameters back to known defaults by
+ hooking SWCLK to ground at power on (hole 7 to hole 3 on the debug
+ connector). Describe this process so that users will be able to get
+ TeleMini back to known values and recover.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1b43a0d4a76910c4b512b2299e17ee0d3b661990
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Oct 4 12:12:56 2018 -0700
+
+ altoslib: Add missing AltosUnitInfo files
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 06b1fc72c8a694b3295262f1e0b50e8c88c53585
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 11 00:06:05 2018 -0700
+
+ altoslib: Fix gyro headings in CSV files
+
+ Use yaw/pitch/roll instead of x/y/z
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3094d1f0ebd734f62d35e5e989d9a2368b713d29
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 17:27:31 2018 -0700
+
+ ao-bringup: Add 'fix-telebt' to reflash TeleBT v4.0 with correct rf cal
+
+ Fetches RF calibration value from the net and applies that when reflashing.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit c2c7873695ee2dc1b6fd153b67accad9693937aa
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 17:03:28 2018 -0700
+
+ altosui: Fetch RF calibration value for TBT v4.0 units from web
+
+ We shipped a pile of TBT v4.0 units without programming the RF
+ calibration value into flash. This change checks to see if the target
+ is in the right serial number range and has the default RF calibration
+ value, in which case it fetches the RF calibration value from our web
+ site.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d5b9fd5b3dd8c8b3bfb478d366ba07501085c1b3
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 13:57:58 2018 -0700
+
+ altos: sdcc doesn't have 'false' and 'true'.
+
+ Use FALSE and TRUE in ms5607.c driver instead.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d2ea6454ebdf8ac7c3a24a738672c57d3f3f885c
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 12:57:06 2018 -0700
+
+ ao-tools/ao-cal-freq: Add --nosave and --output options. Check save results.
+
+ --nosave means don't attempt to update the on-device configuration
+ data in eeprom.
+
+ --output means write the calibration value to a file.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 523e51d2cd2dfc5c0c4ca5a893b005916c46d46a
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Oct 2 12:49:12 2018 -0700
+
+ micropeak: Add MicroUSB 'equals' method
+
+ This lets the code which polls for devices work with MicroUSB devices
+ too.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 8dd942b59edbe6909128b88bfbb8d1e15c3857c6
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 00:59:59 2018 -0700
+
+ doc: Don't accidentally create zero-length PDF files
+
+ The PDF files are generated at the same time the HTML files are, so
+ the PDF versions depend on the HTML ones. However, touching the PDF
+ files is a bad idea.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 56dcfd4acf830fcb69c8b994e4b989c9aa7ddef3
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 00:59:12 2018 -0700
+
+ altos/drivers: Shrink ao_ms5607.c code to fit on micropeak still
+
+ Use some code constructs that make the little AVR processor happier
+ and save about 16 bytes of memory.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3c48b0fd504ae97dfaca91d2064b5822ca6e1344
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 00:52:21 2018 -0700
+
+ altoslib: Reduce debug printf spamming during flashing operation
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ac8a9bc2ef301f1f18772af7d871c257a56ae70c
+Author: Bdale Garbee <bdale@gag.com>
+Date: Thu Aug 30 21:36:18 2018 -0600
+
+ altos: don't build fox1ihu by default
+
+commit 87ae17f888b745de71790d071846b96ab96e1529
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 17:44:02 2018 -0700
+
+ altosuilib: Provide dialog while waiting for flash target to re-appear
+
+ On windows, switching to the boot loader can take a long time. Instead
+ of timing out after a second, show a dialog and let the user cancel
+ the operation if they get bored of waiting.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ba285ecf51e317917858740504a7d691b9839588
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 17:43:17 2018 -0700
+
+ altosuilib: Include device path in equals test of AltosUSBDevice
+
+ Ensure that multiple AltosFlash devices don't appear the same; they
+ all use serial number 1.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 378ebab2e70917b4182cbd840a3fa66e4e42fd92
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 17:42:13 2018 -0700
+
+ altoslib: Use common constants for flash action messages
+
+ Place messages in AltosFlashListener instead of using the same strings
+ in three different places.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 22005da598921ef6fe1a7f1bb5e56e41f44fe12f
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 00:58:14 2018 -0700
+
+ altosuilib: Don't show radio parameter when reflashing radioless devices
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 75420fecbc76ab718661718ada249673e139a29d
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 00:56:25 2018 -0700
+
+ altosuilib: Show a more useful message when the flash target device is unknown
+
+ The flashing code uses the new symbol table to find information in the
+ existing device; if they don't match at all, there won't be anything
+ about the target device known. Tell the user this, rather than
+ displaying mystic information (or crashing).
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d8017f921649d2176d90239e02275dc5ef793815
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 00:54:55 2018 -0700
+
+ altosuilib: Poll for devices while Select Device dialog is displayed
+
+ Lets the user plug/unplug devices and have the dialog box show the
+ current set of available devices. Particularly useful on Windows where
+ it takes a long time after connecting a device for the OS to actually
+ make it usable.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 91bb344a74a413f7dcee379c4d760c34599749bc
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 22 00:53:46 2018 -0700
+
+ altosuilib: Add 'equals' method to AltosDevice
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2f61ef9a5046c39f4eeaaf741031bb6a9607b8a6
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Aug 15 15:31:57 2018 -0700
+
+ altos: Switch global 'log' to 'ao_log_data'
+
+ Avoid conflicts with 'log' math function.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit cbe9cfd5eb5d19b7b9bf4bb75424e7592d708929
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 5 12:20:56 2018 +0800
+
+ altos/stmf0: Stop using 'stdin' name as local variable
+
+ stdio kinda wants to own this name
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1bbef0879ad86dfc21610a255e6cbca1b94b5d1a
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 5 12:19:59 2018 +0800
+
+ altos/lpc: Fix stdio wakeup on serial IRQ
+
+ Should just use USE_SERIAL_0_STDIN directly
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit f16d1e3a2f074b96aae6b9053e8e9e03bd282741
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Aug 13 17:43:13 2018 -0700
+
+ altos: Allow timer interrupt without needing tick count
+
+ This saves a bit of space in the fox1ihu loader which uses the timer
+ interrupt to poke the watchdog.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bb9d071d328969fc3c544897f1fc96e55a842198
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Aug 13 17:43:57 2018 -0700
+
+ altos: Remove spurious 'const' from ao_state_names
+
+ Current gcc complains about this.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 171d12cb7bb0ea185e9b8b6d90e1c0fb94b19008
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 5 12:19:19 2018 +0800
+
+ altos: Remove spurious ao_mma655x_spi_index variable
+
+ This isn't used; was probably included for debugging at some point.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 297eb795b24ec31f6599f48bc8c3769557a7ec6f
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 5 12:32:42 2018 +0800
+
+ Bump java lib versions to 13
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 54838e3d523953e3ce4cea2319b2820c21d2c576
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Aug 6 13:15:21 2018 +0800
+
+ Include TeleMega v3.0 firmware with releases
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 55302673a3bff29ac8cd4c7656a410ba3c182845
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Aug 5 12:28:25 2018 +0800
+
+ Bump version to 1.8.6.1
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 029259feafd63f17fc34b95cc7b1fe55e3f611c3
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Aug 5 14:11:01 2018 +0800
+
+ capture updates to Releasing from 1.8.6 release process
commit 8830fbc99565f753c0ae1f3d9f4b079860c2634a
Author: Keith Packard <keithp@keithp.com>
add a paragraph to the intro pointing to the altusmetrum email list
-commit 59e23c27c2a85d7d748223e444b24d19937afe47
-Author: Bdale Garbee <bdale@gag.com>
-Date: Sun Mar 18 15:49:07 2018 -0600
-
- preparing to release 1.8.5
-
-commit 7b614380f307cb5e27f2a05281bc76c4ace93334
-Merge: 16a9d861 39023ed6
-Author: Bdale Garbee <bdale@gag.com>
-Date: Sun Mar 18 15:47:31 2018 -0600
-
- Merge branch 'master' into branch-1.8
-
commit 39023ed6e29103a85bfad505506fa0dbf4dc1112
Author: Bdale Garbee <bdale@gag.com>
Date: Sun Mar 18 15:42:48 2018 -0600
update Releasing with wisdom from 1.8.4 release process
-commit 16a9d8617b2d2092d166a85ada4349601afb0dce
-Author: Bdale Garbee <bdale@gag.com>
-Date: Thu Dec 21 19:06:22 2017 -0700
-
- releasing 1.8.4
-
-commit dbb78c8222c45f4430601deee0194b0c9dc2e79a
-Merge: fe38c225 87aab995
-Author: Bdale Garbee <bdale@gag.com>
-Date: Thu Dec 21 19:05:46 2017 -0700
-
- Merge branch 'master' into branch-1.8
-
commit 87aab99521dc44d1d29fbb0b7f227f868f074836
Author: Keith Packard <keithp@keithp.com>
Date: Thu Dec 21 17:37:10 2017 -0800
update Releasing with changes discovered in 1.8.3 release process
-commit fe38c22595b050435dbacd35f1baae064fb7de75
-Author: Bdale Garbee <bdale@gag.com>
-Date: Mon Dec 11 21:38:59 2017 -0700
-
- releasing 1.8.3
-
-commit ea0aa97fb93e669868a6f2c49c5d4b46e7615b1f
-Merge: 216ea638 9adf8b23
-Author: Bdale Garbee <bdale@gag.com>
-Date: Mon Dec 11 21:37:48 2017 -0700
-
- Merge branch 'master' into branch-1.8
-
commit 9adf8b23aac8256f230b10adcab9dd323266caaa
Author: Bdale Garbee <bdale@gag.com>
Date: Mon Dec 11 21:33:21 2017 -0700
tweak Releasing based on 1.8.2 release experience
-commit 216ea6388a75c46891dc4687a2eb0c97dc63b136
-Author: Bdale Garbee <bdale@gag.com>
-Date: Mon Sep 18 20:46:04 2017 -0600
-
- releasing 1.8.2
-
commit 60666630789b6925d7e16160ebdc88ccd23f51de
Author: Bdale Garbee <bdale@gag.com>
Date: Mon Sep 18 20:43:14 2017 -0600
be more aggressive about removing and ignoring .mdwn files
-commit 1ece6e6fd3faaae3f6c6d434497eb04235939dc3
-Author: Bdale Garbee <bdale@gag.com>
-Date: Mon Sep 18 20:43:14 2017 -0600
-
- be more aggressive about removing and ignoring .mdwn files
-
-commit b12e982259817328e348f1aaa91c5c824891e7b9
-Merge: b1cf0dab e87d56b6
-Author: Bdale Garbee <bdale@gag.com>
-Date: Mon Sep 18 20:35:00 2017 -0600
-
- Merge branch 'master' into branch-1.8
-
commit e87d56b665ca30a3e5920c23cd60c99b84341aa2
Author: Keith Packard <keithp@keithp.com>
Date: Mon Sep 18 18:51:51 2017 -0700
a few tweaks to the Releasing document based on experience with 1.8.1
-commit b1cf0dab1e28433e06ab02cec033951ea0149ea3
-Author: Bdale Garbee <bdale@gag.com>
-Date: Mon Aug 28 12:05:17 2017 -0600
-
- releasing 1.8.1
-
commit b68c0482d4fae8eb54cde1df0e4bcf4c5d272bad
Author: Keith Packard <keithp@keithp.com>
Date: Sun Aug 27 22:49:09 2017 -0700
projects / fw / altos / blobdiff