3 {application} provides voice announcements during
4 flight so that you can keep your eyes on the
5 sky and still get information about the
6 current flight status. However, sometimes you
7 don't want to hear them.
10 Turns all voice announcements on and off
13 Plays a short message allowing you to verify
14 that the audio system is working and the volume settings
19 {application} logs all telemetry data and saves all
20 TeleMetrum flash data to this directory. This
21 directory is also used as the staring point
22 when selecting data files for display or
25 Click on the directory name to bring up a
26 directory choosing dialog, select a new
27 directory and click 'Select Directory' to
28 change where {application} reads and writes data
33 This value is transmitted in each command
34 packet sent from TeleDongle and received from
35 an altimeter. It is not used in telemetry
36 mode, as the callsign configured in the
37 altimeter board is included in all telemetry
38 packets. Configure this with the {application}
39 operators call sign as needed to comply with
40 your local radio regulations.
42 Note that to successfully command a flight
43 computer over the radio (to configure the
44 altimeter, monitor idle, or fire pyro
45 charges), the callsign configured here must
46 exactly match the callsign configured in the
47 flight computer. This matching is case
52 This switches between metric units (meters)
53 and imperial units (feet and miles). This
54 affects the display of values use during
55 flight monitoring, configuration, data
56 graphing and all of the voice
57 announcements. It does not change the units
58 used when exporting to CSV files, those are
59 always produced in metric units.
63 This causes all communication with a connected
64 device to be dumped to the console from which
65 {application} was started. If you've started it from
66 an icon or menu entry, the output will simply
67 be discarded. This mode can be useful to debug
68 various serial communication issues.
72 Selects the set of fonts used in the flight
73 monitor window. Choose between the small,
74 medium and large sets.
78 Switches between the available Java user
79 interface appearances. The default selection
80 is supposed to match the native window system
81 appearance for the target platform.
85 Selects the initial position for the main
86 {application} window that includes all of the
91 Sets the number of map 'tiles' kept in memory
92 while the application is running. More tiles
93 consume more memory, but will make panning
94 around the map faster.
96 ==== Manage Frequencies
98 This brings up a dialog where you can
99 configure the set of frequencies shown in the
100 various frequency menus. You can add as many
101 as you like, or even reconfigure the default
102 set. Changing this list does not affect the
103 frequency settings of any devices, it only
104 changes the set of frequencies shown in the