altos/stm32f1: Poke the ADC harder to get it to sample

[fw/altos] / src / telemega-v6.0 / ao_pins.h

diff --git a/src/telemega-v6.0/ao_pins.h b/src/telemega-v6.0/ao_pins.h
index 89af7ed2135107c95af3fc5459a43f00b500bd24..8e9be45d8c5831c0e1d0727d16f49a3f49feff3b 100644 (file)
--- a/src/telemega-v6.0/ao_pins.h
+++ b/src/telemega-v6.0/ao_pins.h
@@ -265,6 +265,12 @@ struct ao_adc {
 #define AO_BATTERY_DIV_PLUS    56      /* 5.6k */
 #define AO_BATTERY_DIV_MINUS   100     /* 10k */
 
+/*
+ * Voltage divider on ADC pyro battery sampler
+ */
+#define AO_PYRO_BATTERY_DIV_PLUS       100     /* 100k */
+#define AO_PYRO_BATTERY_DIV_MINUS      27      /* 27k */
+
 /*
  * Voltage divider on ADC igniter samplers
  */
@@ -327,18 +333,25 @@ struct ao_adc {
 
 /*
  *
- * If the board is laying component side up with
- * the antenna (nose) pointing north
+ * Here are the required sensor signs:
+ *
+ * +along      nose up
+ * +across     USB down
+ * +through    TH down
  *
- * +along      north   +roll   left up
- * +across     west    +pitch  nose down
- * +through    up      +yaw    left turn
+ * With the board aligned to have positive accel for the relevant
+ * axis, looking down from above we have:
+ *
+ * +roll       counter clockwise (nose up)
+ * +pitch      counter clockwise (USB down)
+ * +yaw                counter clockwise (TH down)
  */
 
 /*
- * bmi088
- *
- *     pin 1 NE corner of chip
+ * On TMega v6, bmi088 pin 1 (NE corner of chip) is placed towards the
+ * USB and antenna edges of the board. Relative to bmi088 specs, to
+ * get the above values, we need to flip the Y axis, assigning values
+ * as follows:
  *
  *     +along          +X      +roll   +X
  *     +across         -Y      +pitch  -Y
@@ -354,11 +367,11 @@ struct ao_adc {
 #define HAS_IMU                        1
 
 #define ao_bmi088_along(m)     ((m)->acc.x)
-#define ao_bmi088_across(m)    ((m)->acc.y)
+#define ao_bmi088_across(m)    (-(m)->acc.y)
 #define ao_bmi088_through(m)   ((m)->acc.z)
 
 #define ao_bmi088_roll(m)      ((m)->gyr.x)
-#define ao_bmi088_pitch(m)     ((m)->gyr.y)
+#define ao_bmi088_pitch(m)     (-(m)->gyr.y)
 #define ao_bmi088_yaw(m)       ((m)->gyr.z)
 
 #define ao_data_along(packet)  ao_bmi088_along(&(packet)->bmi088)