stranded, into the GND hole just above the screw terminal
strip and solder it in place.
- Connecting the positive battery terminal to the pyro
+ Connecting the switched positive battery terminal to the pyro
charges must be done separate from TeleMetrum, by soldering
- them together or using some other connector.
-
+ them together or using some other connector. Note that you
+ must include a switch in the positive lead from the pyro
+ battery for safety!
The other lead from each pyro charge is then inserted into
- the appropriate per-pyro channel screw terminal (terminal 4 for the
- Main charge, terminal 6 for the Apogee charge).
+ the appropriate per-pyro channel screw terminal (terminal 4
+ for the Main charge, terminal 6 for the Apogee charge).
=== Using an Active Switch with TeleMetrum