add link to Tom's photo site

[web/gag.com] / rockets / airframes / YikStik3 / index.mdwn

diff --git a/rockets/airframes/YikStik3/index.mdwn b/rockets/airframes/YikStik3/index.mdwn
index 0ac1579a34e5ab49de92493756e7dade170da7da..964f706ade4859da2c6ed0412865a93e95bd4249 100644 (file)
--- a/rockets/airframes/YikStik3/index.mdwn
+++ b/rockets/airframes/YikStik3/index.mdwn
@@ -146,9 +146,10 @@ All rings and bulkheads were cut using a CNC milling machine from 3/8 inch
 birch plywood.  The fin forward and leading edge rings are made from 3/4 inch
 thick birch plywood, mostly to provide sufficient depth for milled fin slots.
 
-Will add a pointer to build photos here once they are available.
+## Photos
 
-## Publicity
+* [Terry Lee](http://gallery.gag.com/rockets/YikStik3)
+* [Tom Marble](http://media.info9.net/tag/yikstik3/)
 
 ## Flights
 
@@ -158,9 +159,10 @@ reload.  Unfortunately, the jet stream was parked over the site yielding
 strong upper level winds, such that it would not have been possible to keep 
 the airframe inside the waiver cylinder during recovery... so we didn't fly.
 
-The motor has now been certified as the Pro75-6GXL 9977-M2245-IM-P.  I hope to 
-fly YikStik3 for the first time at the 
+The motor was then certified as the Pro75-6GXL 9977-M2245-IM-P.  I was able
+to fly YikStik3 for the first time at the 
 [Kloudbusters](http://www.kloudbusters.org/) 
 [Airfest 18](http://www.kloudbusters.org/airfest/Default.aspx).  They've got 
-a huge waiver cylinder and an awe-inspiring recovery area .. here's hoping 
-the weather cooperates!  It should be one heck of a flight!
+a huge waiver cylinder and an awe-inspiring recovery area .. which it turns
+out we didn't need much of!  The airframe achieved approximately Mach 2.2 and
+21,660 feet above ground.